Commit 3b2a9995 authored by Liu Ying's avatar Liu Ying Committed by Philipp Zabel

drm/imx: imx-ldb: Disable both channels for split mode in enc->disable()

Both of the two LVDS channels should be disabled for split mode
in the encoder's ->disable() callback, because they are enabled
in the encoder's ->enable() callback.

Fixes: 6556f7f8 ("drm: imx: Move imx-drm driver out of staging")
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarLiu Ying <victor.liu@nxp.com>
Signed-off-by: default avatarPhilipp Zabel <p.zabel@pengutronix.de>
parent 853fe4fc
...@@ -296,18 +296,19 @@ static void imx_ldb_encoder_disable(struct drm_encoder *encoder) ...@@ -296,18 +296,19 @@ static void imx_ldb_encoder_disable(struct drm_encoder *encoder)
{ {
struct imx_ldb_channel *imx_ldb_ch = enc_to_imx_ldb_ch(encoder); struct imx_ldb_channel *imx_ldb_ch = enc_to_imx_ldb_ch(encoder);
struct imx_ldb *ldb = imx_ldb_ch->ldb; struct imx_ldb *ldb = imx_ldb_ch->ldb;
int dual = ldb->ldb_ctrl & LDB_SPLIT_MODE_EN;
int mux, ret; int mux, ret;
drm_panel_disable(imx_ldb_ch->panel); drm_panel_disable(imx_ldb_ch->panel);
if (imx_ldb_ch == &ldb->channel[0]) if (imx_ldb_ch == &ldb->channel[0] || dual)
ldb->ldb_ctrl &= ~LDB_CH0_MODE_EN_MASK; ldb->ldb_ctrl &= ~LDB_CH0_MODE_EN_MASK;
else if (imx_ldb_ch == &ldb->channel[1]) if (imx_ldb_ch == &ldb->channel[1] || dual)
ldb->ldb_ctrl &= ~LDB_CH1_MODE_EN_MASK; ldb->ldb_ctrl &= ~LDB_CH1_MODE_EN_MASK;
regmap_write(ldb->regmap, IOMUXC_GPR2, ldb->ldb_ctrl); regmap_write(ldb->regmap, IOMUXC_GPR2, ldb->ldb_ctrl);
if (ldb->ldb_ctrl & LDB_SPLIT_MODE_EN) { if (dual) {
clk_disable_unprepare(ldb->clk[0]); clk_disable_unprepare(ldb->clk[0]);
clk_disable_unprepare(ldb->clk[1]); clk_disable_unprepare(ldb->clk[1]);
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment