Commit 3b31fabf authored by Dmitry Eremin-Solenikov's avatar Dmitry Eremin-Solenikov Committed by Eric Miao

[ARM] pxa: add support for CSB701 baseboard

CSB701 is one of baseboards that can be used with CSB726 SOM.
This currently adds support for button and LED on the board.
More to come later.
Signed-off-by: default avatarDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: default avatarEric Miao <eric.miao@marvell.com>
parent aac42970
......@@ -401,6 +401,10 @@ config MACH_CSB726
Say Y here if you intend to run this kernel on a Cogent
CSB726 System On Module.
config CSB726_CSB701
bool "Enable supprot for CSB701 baseboard"
depends on MACH_CSB726
config PXA_EZX
bool "Motorola EZX Platform"
select PXA27x
......
......@@ -76,6 +76,7 @@ obj-$(CONFIG_PXA_EZX) += ezx.o
obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o
obj-$(CONFIG_MACH_CSB726) += csb726.o
obj-$(CONFIG_CSB726_CSB701) += csb701.o
# Support for blinky lights
led-y := leds.o
......
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/leds.h>
static struct gpio_keys_button csb701_buttons[] = {
{
.code = 0x7,
.gpio = 1,
.active_low = 1,
.desc = "SW2",
.type = EV_SW,
.wakeup = 1,
},
};
static struct gpio_keys_platform_data csb701_gpio_keys_data = {
.buttons = csb701_buttons,
.nbuttons = ARRAY_SIZE(csb701_buttons),
};
static struct gpio_led csb701_leds[] = {
{
.name = "csb701:yellow:heartbeat",
.default_trigger = "heartbeat",
.gpio = 11,
.active_low = 1,
},
};
static struct platform_device csb701_gpio_keys = {
.name = "gpio-keys",
.id = -1,
.dev.platform_data = &csb701_gpio_keys_data,
};
static struct gpio_led_platform_data csb701_leds_gpio_data = {
.leds = csb701_leds,
.num_leds = ARRAY_SIZE(csb701_leds),
};
static struct platform_device csb701_leds_gpio = {
.name = "leds-gpio",
.id = -1,
.dev.platform_data = &csb701_leds_gpio_data,
};
static struct platform_device *devices[] __initdata = {
&csb701_gpio_keys,
&csb701_leds_gpio,
};
static int __init csb701_init(void)
{
return platform_add_devices(devices, ARRAY_SIZE(devices));
}
module_init(csb701_init);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment