Commit 3b75c3df authored by Peng Li's avatar Peng Li Committed by David S. Miller

net: hns3: Add support for IFF_ALLMULTI flag

This patch adds support for IFF_ALLMULTI flag to HNS3 PF and VF
driver.
Signed-off-by: default avatarPeng Li <lipeng321@huawei.com>
Signed-off-by: default avatarSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 6c251711
......@@ -316,7 +316,8 @@ struct hnae3_ae_ops {
int (*set_loopback)(struct hnae3_handle *handle,
enum hnae3_loop loop_mode, bool en);
void (*set_promisc_mode)(struct hnae3_handle *handle, u32 en);
void (*set_promisc_mode)(struct hnae3_handle *handle, bool en_uc_pmc,
bool en_mc_pmc);
int (*set_mtu)(struct hnae3_handle *handle, int new_mtu);
void (*get_pauseparam)(struct hnae3_handle *handle,
......
......@@ -415,9 +415,11 @@ static void hns3_nic_set_rx_mode(struct net_device *netdev)
if (h->ae_algo->ops->set_promisc_mode) {
if (netdev->flags & IFF_PROMISC)
h->ae_algo->ops->set_promisc_mode(h, 1);
h->ae_algo->ops->set_promisc_mode(h, true, true);
else if (netdev->flags & IFF_ALLMULTI)
h->ae_algo->ops->set_promisc_mode(h, false, true);
else
h->ae_algo->ops->set_promisc_mode(h, 0);
h->ae_algo->ops->set_promisc_mode(h, false, false);
}
if (__dev_uc_sync(netdev, hns3_nic_uc_sync, hns3_nic_uc_unsync))
netdev_err(netdev, "sync uc address fail\n");
......
......@@ -95,7 +95,7 @@ static int hns3_lp_setup(struct net_device *ndev, enum hnae3_loop loop, bool en)
if (ret)
return ret;
h->ae_algo->ops->set_promisc_mode(h, en);
h->ae_algo->ops->set_promisc_mode(h, en, en);
return ret;
}
......
......@@ -3580,13 +3580,15 @@ void hclge_promisc_param_init(struct hclge_promisc_param *param, bool en_uc,
param->vf_id = vport_id;
}
static void hclge_set_promisc_mode(struct hnae3_handle *handle, u32 en)
static void hclge_set_promisc_mode(struct hnae3_handle *handle, bool en_uc_pmc,
bool en_mc_pmc)
{
struct hclge_vport *vport = hclge_get_vport(handle);
struct hclge_dev *hdev = vport->back;
struct hclge_promisc_param param;
hclge_promisc_param_init(&param, en, en, true, vport->vport_id);
hclge_promisc_param_init(&param, en_uc_pmc, en_mc_pmc, true,
vport->vport_id);
hclge_cmd_set_promisc_mode(hdev, &param);
}
......
......@@ -190,11 +190,12 @@ static int hclge_map_unmap_ring_to_vf_vector(struct hclge_vport *vport, bool en,
static int hclge_set_vf_promisc_mode(struct hclge_vport *vport,
struct hclge_mbx_vf_to_pf_cmd *req)
{
bool en = req->msg[1] ? true : false;
bool en_uc = req->msg[1] ? true : false;
bool en_mc = req->msg[2] ? true : false;
struct hclge_promisc_param param;
/* always enable broadcast promisc bit */
hclge_promisc_param_init(&param, en, en, true, vport->vport_id);
hclge_promisc_param_init(&param, en_uc, en_mc, true, vport->vport_id);
return hclge_cmd_set_promisc_mode(vport->back, &param);
}
......
......@@ -654,7 +654,8 @@ static int hclgevf_put_vector(struct hnae3_handle *handle, int vector)
return 0;
}
static int hclgevf_cmd_set_promisc_mode(struct hclgevf_dev *hdev, u32 en)
static int hclgevf_cmd_set_promisc_mode(struct hclgevf_dev *hdev,
bool en_uc_pmc, bool en_mc_pmc)
{
struct hclge_mbx_vf_to_pf_cmd *req;
struct hclgevf_desc desc;
......@@ -664,7 +665,8 @@ static int hclgevf_cmd_set_promisc_mode(struct hclgevf_dev *hdev, u32 en)
hclgevf_cmd_setup_basic_desc(&desc, HCLGEVF_OPC_MBX_VF_TO_PF, false);
req->msg[0] = HCLGE_MBX_SET_PROMISC_MODE;
req->msg[1] = en;
req->msg[1] = en_uc_pmc ? 1 : 0;
req->msg[2] = en_mc_pmc ? 1 : 0;
status = hclgevf_cmd_send(&hdev->hw, &desc, 1);
if (status)
......@@ -674,11 +676,12 @@ static int hclgevf_cmd_set_promisc_mode(struct hclgevf_dev *hdev, u32 en)
return status;
}
static void hclgevf_set_promisc_mode(struct hnae3_handle *handle, u32 en)
static void hclgevf_set_promisc_mode(struct hnae3_handle *handle,
bool en_uc_pmc, bool en_mc_pmc)
{
struct hclgevf_dev *hdev = hclgevf_ae_get_hdev(handle);
hclgevf_cmd_set_promisc_mode(hdev, en);
hclgevf_cmd_set_promisc_mode(hdev, en_uc_pmc, en_mc_pmc);
}
static int hclgevf_tqp_enable(struct hclgevf_dev *hdev, int tqp_id,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment