Commit 3b9ec1b3 authored by Antony Pavlov's avatar Antony Pavlov Committed by Ralf Baechle

MIPS: ath79: add initial support for Dragino MS14 (Dragino 2)

The following features are supported:

  * UART;
  * SPI-flash;
  * USB host;
  * GPIO keys and LEDs.

Links:

    * http://www.dragino.com/products/mother-board/item/71-ms14-p.html
    * https://wiki.openwrt.org/toh/dragino/ms14Signed-off-by: default avatarAntony Pavlov <antonynpavlov@gmail.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Alban Bedel <albeu@free.fr>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12882/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 4d536731
# All DTBs # All DTBs
dtb-$(CONFIG_ATH79) += ar9132_tl_wr1043nd_v1.dtb dtb-$(CONFIG_ATH79) += ar9132_tl_wr1043nd_v1.dtb
dtb-$(CONFIG_ATH79) += ar9331_dragino_ms14.dtb
dtb-$(CONFIG_ATH79) += ar9331_tl_mr3020.dtb dtb-$(CONFIG_ATH79) += ar9331_tl_mr3020.dtb
# Force kbuild to make empty built-in.o if necessary # Force kbuild to make empty built-in.o if necessary
......
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
model = "Dragino MS14 (Dragino 2)";
compatible = "dragino,ms14";
aliases {
serial0 = &uart;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>;
};
leds {
compatible = "gpio-leds";
wlan {
label = "dragino2:red:wlan";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
lan {
label = "dragino2:red:lan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wan {
label = "dragino2:red:wan";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
default-state = "off";
};
system {
label = "dragino2:red:system";
gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
button@0 {
label = "jumpstart";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
button@1 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
};
};
&ref {
clock-frequency = <25000000>;
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&usb {
dr_mode = "host";
status = "okay";
};
&usb_phy {
status = "okay";
};
&spi {
num-chipselects = <1>;
status = "okay";
/* Winbond 25Q128BVFG SPI flash */
spiflash: w25q128@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "winbond,w25q128", "jedec,spi-nor";
spi-max-frequency = <104000000>;
reg = <0>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment