Commit 3bb35ac4 authored by Gerlando Falauto's avatar Gerlando Falauto Committed by David S. Miller

net/fsl_pq_mdio: fix computed address for the TBI register

commit afae5ad7
  "net/fsl_pq_mdio: streamline probing of MDIO nodes"

added support for different types of MDIO devices:
1) Gianfar MDIO nodes that only map the MII registers
2) Gianfar MDIO nodes that map the full MDIO register set
3) eTSEC2 MDIO nodes (which map the full MDIO register set)
4) QE MDIO nodes (which map only the MII registers)

However, the implementation for types 1 and 4 would mistakenly assume
a mapping of the full MDIO register set, thereby computing the address
for the TBI register starting from the containing structure.
The TBI register would therefore be accessed at a wrong (much bigger)
address, not giving the expected result at all.
This patch restores the correct behavior we had prior to the above one.

The consequences of this bug are apparent when trying to access a PHY
with the same address as the value contained in the initial value of
the TBI register (normally 0); in that case you'll get answers from the
internal TBI device (even though MDIO/MDC pins are actually *also*
toggling on the physical bus!).
Beware that you also need to add a fake tbi node to your device tree
with an unused address.

Notice how this fix is related to commit
22066949
  "powerpc: Add TBI PHY node to first MDIO bus"

which fixed the behavior in kernel 3.3, which was later broken by the
above commit on kernel 3.7.
Signed-off-by: default avatarGerlando Falauto <gerlando.falauto@keymile.com>
Cc: Timur Tabi <timur@tabi.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 3dd03e52
......@@ -198,17 +198,28 @@ static int fsl_pq_mdio_reset(struct mii_bus *bus)
#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
/*
* Return the TBIPA address, starting from the address
* of the mapped GFAR MDIO registers (struct gfar)
* This is mildly evil, but so is our hardware for doing this.
* Also, we have to cast back to struct gfar because of
* definition weirdness done in gianfar.h.
*/
static uint32_t __iomem *get_gfar_tbipa(void __iomem *p)
static uint32_t __iomem *get_gfar_tbipa_from_mdio(void __iomem *p)
{
struct gfar __iomem *enet_regs = p;
return &enet_regs->tbipa;
}
/*
* Return the TBIPA address, starting from the address
* of the mapped GFAR MII registers (gfar_mii_regs[] within struct gfar)
*/
static uint32_t __iomem *get_gfar_tbipa_from_mii(void __iomem *p)
{
return get_gfar_tbipa_from_mdio(container_of(p, struct gfar, gfar_mii_regs));
}
/*
* Return the TBIPAR address for an eTSEC2 node
*/
......@@ -220,11 +231,12 @@ static uint32_t __iomem *get_etsec_tbipa(void __iomem *p)
#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
/*
* Return the TBIPAR address for a QE MDIO node
* Return the TBIPAR address for a QE MDIO node, starting from the address
* of the mapped MII registers (struct fsl_pq_mii)
*/
static uint32_t __iomem *get_ucc_tbipa(void __iomem *p)
{
struct fsl_pq_mdio __iomem *mdio = p;
struct fsl_pq_mdio __iomem *mdio = container_of(p, struct fsl_pq_mdio, mii);
return &mdio->utbipar;
}
......@@ -300,14 +312,14 @@ static const struct of_device_id fsl_pq_mdio_match[] = {
.compatible = "fsl,gianfar-tbi",
.data = &(struct fsl_pq_mdio_data) {
.mii_offset = 0,
.get_tbipa = get_gfar_tbipa,
.get_tbipa = get_gfar_tbipa_from_mii,
},
},
{
.compatible = "fsl,gianfar-mdio",
.data = &(struct fsl_pq_mdio_data) {
.mii_offset = 0,
.get_tbipa = get_gfar_tbipa,
.get_tbipa = get_gfar_tbipa_from_mii,
},
},
{
......@@ -315,7 +327,7 @@ static const struct of_device_id fsl_pq_mdio_match[] = {
.compatible = "gianfar",
.data = &(struct fsl_pq_mdio_data) {
.mii_offset = offsetof(struct fsl_pq_mdio, mii),
.get_tbipa = get_gfar_tbipa,
.get_tbipa = get_gfar_tbipa_from_mdio,
},
},
{
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment