Skip to content

L
linux
Commit 3c236f8c authored by John Garry's avatar John Garry Committed by Martin K. Petersen
Browse files
Options

scsi: libsas: Print expander PHY indexes in decimal 

Currently we print expander PHY indexes in a mix of decimal and hex.

It is more consistent and also more convenient to read decimal, so
make this change.

We use width of 2 for expander and 1 for root PHYs prints.

Some lines which were needlessly spilling multiple lines are unified.
Signed-off-by: default avatarJohn Garry <john.garry@huawei.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent d8649fc1
Hide whitespace changes
Inline Side-by-side
Showing with 27 additions and 28 deletions
drivers/scsi/libsas/sas_ata.c
View file @ 3c236f8c
......@@ -281,7 +281,7 @@ int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
res = sas_get_report_phy_sata(dev->parent, phy->phy_id,
&dev->sata_dev.rps_resp);
if (res) {
pr_debug("report phy sata to %016llx:0x%x returned 0x%x\n",
pr_debug("report phy sata to %016llx:%02d returned 0x%x\n",
SAS_ADDR(dev->parent->sas_addr),
phy->phy_id, res);
return res;
......
drivers/scsi/libsas/sas_expander.c
View file @ 3c236f8c
......@@ -870,7 +870,7 @@ static struct domain_device *sas_ex_discover_end_dev(
res = sas_discover_sata(child);
if (res) {
pr_notice("sas_discover_sata() for device %16llx at %016llx:0x%x returned 0x%x\n",
pr_notice("sas_discover_sata() for device %16llx at %016llx:%02d returned 0x%x\n",
SAS_ADDR(child->sas_addr),
SAS_ADDR(parent->sas_addr), phy_id, res);
goto out_list_del;
......@@ -895,7 +895,7 @@ static struct domain_device *sas_ex_discover_end_dev(
res = sas_discover_end_dev(child);
if (res) {
pr_notice("sas_discover_end_dev() for device %16llx at %016llx:0x%x returned 0x%x\n",
pr_notice("sas_discover_end_dev() for device %16llx at %016llx:%02d returned 0x%x\n",
SAS_ADDR(child->sas_addr),
SAS_ADDR(parent->sas_addr), phy_id, res);
goto out_list_del;
......@@ -960,7 +960,7 @@ static struct domain_device *sas_ex_discover_expander(
int res;
if (phy->routing_attr == DIRECT_ROUTING) {
pr_warn("ex %016llx:0x%x:D <--> ex %016llx:0x%x is not allowed\n",
pr_warn("ex %016llx:%02d:D <--> ex %016llx:0x%x is not allowed\n",
SAS_ADDR(parent->sas_addr), phy_id,
SAS_ADDR(phy->attached_sas_addr),
phy->attached_phy_id);
......@@ -1070,7 +1070,7 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
ex_phy->attached_dev_type != SAS_FANOUT_EXPANDER_DEVICE &&
ex_phy->attached_dev_type != SAS_EDGE_EXPANDER_DEVICE &&
ex_phy->attached_dev_type != SAS_SATA_PENDING) {
pr_warn("unknown device type(0x%x) attached to ex %016llx phy 0x%x\n",
pr_warn("unknown device type(0x%x) attached to ex %016llx phy%02d\n",
ex_phy->attached_dev_type,
SAS_ADDR(dev->sas_addr),
phy_id);
......@@ -1086,7 +1086,7 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
}
if (sas_ex_join_wide_port(dev, phy_id)) {
pr_debug("Attaching ex phy%d to wide port %016llx\n",
pr_debug("Attaching ex phy%02d to wide port %016llx\n",
phy_id, SAS_ADDR(ex_phy->attached_sas_addr));
return res;
}
......@@ -1098,7 +1098,7 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
break;
case SAS_FANOUT_EXPANDER_DEVICE:
if (SAS_ADDR(dev->port->disc.fanout_sas_addr)) {
pr_debug("second fanout expander %016llx phy 0x%x attached to ex %016llx phy 0x%x\n",
pr_debug("second fanout expander %016llx phy%02d attached to ex %016llx phy%02d\n",
SAS_ADDR(ex_phy->attached_sas_addr),
ex_phy->attached_phy_id,
SAS_ADDR(dev->sas_addr),
......@@ -1131,7 +1131,7 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
SAS_ADDR(child->sas_addr)) {
ex->ex_phy[i].phy_state= PHY_DEVICE_DISCOVERED;
if (sas_ex_join_wide_port(dev, i))
pr_debug("Attaching ex phy%d to wide port %016llx\n",
pr_debug("Attaching ex phy%02d to wide port %016llx\n",
i, SAS_ADDR(ex->ex_phy[i].attached_sas_addr));
}
}
......@@ -1266,7 +1266,7 @@ static int sas_check_ex_subtractive_boundary(struct domain_device *dev)
else if (SAS_ADDR(sub_sas_addr) !=
SAS_ADDR(phy->attached_sas_addr)) {
pr_notice("ex %016llx phy 0x%x diverges(%016llx) on subtractive boundary(%016llx). Disabled\n",
pr_notice("ex %016llx phy%02d diverges(%016llx) on subtractive boundary(%016llx). Disabled\n",
SAS_ADDR(dev->sas_addr), i,
SAS_ADDR(phy->attached_sas_addr),
SAS_ADDR(sub_sas_addr));
......@@ -1287,7 +1287,7 @@ static void sas_print_parent_topology_bug(struct domain_device *child,
};
struct domain_device *parent = child->parent;
pr_notice("%s ex %016llx phy 0x%x <--> %s ex %016llx phy 0x%x has %c:%c routing link!\n",
pr_notice("%s ex %016llx phy%02d <--> %s ex %016llx phy%02d has %c:%c routing link!\n",
ex_type[parent->dev_type],
SAS_ADDR(parent->sas_addr),
parent_phy->phy_id,
......@@ -1309,7 +1309,7 @@ static int sas_check_eeds(struct domain_device *child,
if (SAS_ADDR(parent->port->disc.fanout_sas_addr) != 0) {
res = -ENODEV;
pr_warn("edge ex %016llx phy S:0x%x <--> edge ex %016llx phy S:0x%x, while there is a fanout ex %016llx\n",
pr_warn("edge ex %016llx phy S:%02d <--> edge ex %016llx phy S:%02d, while there is a fanout ex %016llx\n",
SAS_ADDR(parent->sas_addr),
parent_phy->phy_id,
SAS_ADDR(child->sas_addr),
......@@ -1332,7 +1332,7 @@ static int sas_check_eeds(struct domain_device *child,
;
else {
res = -ENODEV;
pr_warn("edge ex %016llx phy 0x%x <--> edge ex %016llx phy 0x%x link forms a third EEDS!\n",
pr_warn("edge ex %016llx phy%02d <--> edge ex %016llx phy%02d link forms a third EEDS!\n",
SAS_ADDR(parent->sas_addr),
parent_phy->phy_id,
SAS_ADDR(child->sas_addr),
......@@ -1450,11 +1450,11 @@ static int sas_configure_present(struct domain_device *dev, int phy_id,
goto out;
res = rri_resp[2];
if (res == SMP_RESP_NO_INDEX) {
pr_warn("overflow of indexes: dev %016llx phy 0x%x index 0x%x\n",
pr_warn("overflow of indexes: dev %016llx phy%02d index 0x%x\n",
SAS_ADDR(dev->sas_addr), phy_id, i);
goto out;
} else if (res != SMP_RESP_FUNC_ACC) {
pr_notice("%s: dev %016llx phy 0x%x index 0x%x result 0x%x\n",
pr_notice("%s: dev %016llx phy%02d index 0x%x result 0x%x\n",
__func__, SAS_ADDR(dev->sas_addr), phy_id,
i, res);
goto out;
......@@ -1520,7 +1520,7 @@ static int sas_configure_set(struct domain_device *dev, int phy_id,
goto out;
res = cri_resp[2];
if (res == SMP_RESP_NO_INDEX) {
pr_warn("overflow of indexes: dev %016llx phy 0x%x index 0x%x\n",
pr_warn("overflow of indexes: dev %016llx phy%02d index 0x%x\n",
SAS_ADDR(dev->sas_addr), phy_id, index);
}
out:
......@@ -1876,7 +1876,7 @@ static int sas_find_bcast_dev(struct domain_device *dev,
if (phy_id != -1) {
*src_dev = dev;
ex->ex_change_count = ex_change_count;
pr_info("ex %016llx phy%d change count has changed\n",
pr_info("ex %016llx phy%02d change count has changed\n",
SAS_ADDR(dev->sas_addr), phy_id);
return res;
} else
......@@ -1991,7 +1991,7 @@ static int sas_discover_new(struct domain_device *dev, int phy_id)
struct domain_device *child;
int res;
pr_debug("ex %016llx phy%d new device attached\n",
pr_debug("ex %016llx phy%02d new device attached\n",
SAS_ADDR(dev->sas_addr), phy_id);
res = sas_ex_phy_discover(dev, phy_id);
if (res)
......@@ -2041,10 +2041,10 @@ static int sas_rediscover_dev(struct domain_device *dev, int phy_id,
int res;
if (!last)
sprintf(msg, ", part of a wide port with phy%d", sibling);
sprintf(msg, ", part of a wide port with phy%02d", sibling);
pr_debug("ex %016llx rediscovering phy%d%s\n", SAS_ADDR(dev->sas_addr),
phy_id, msg);
pr_debug("ex %016llx rediscovering phy%02d%s\n",
SAS_ADDR(dev->sas_addr), phy_id, msg);
memset(sas_addr, 0, SAS_ADDR_SIZE);
res = sas_get_phy_attached_dev(dev, phy_id, sas_addr, &type);
......@@ -2083,13 +2083,13 @@ static int sas_rediscover_dev(struct domain_device *dev, int phy_id,
if (ata_dev && phy->attached_dev_type == SAS_SATA_PENDING)
action = ", needs recovery";
pr_debug("ex %016llx phy 0x%x broadcast flutter%s\n",
pr_debug("ex %016llx phy%02d broadcast flutter%s\n",
SAS_ADDR(dev->sas_addr), phy_id, action);
return res;
}
/* we always have to delete the old device when we went here */
pr_info("ex %016llx phy 0x%x replace %016llx\n",
pr_info("ex %016llx phy%02d replace %016llx\n",
SAS_ADDR(dev->sas_addr), phy_id,
SAS_ADDR(phy->attached_sas_addr));
sas_unregister_devs_sas_addr(dev, phy_id, last);
......@@ -2119,7 +2119,7 @@ static int sas_rediscover(struct domain_device *dev, const int phy_id)
int i;
bool last = true; /* is this the last phy of the port */
pr_debug("ex %016llx phy%d originated BROADCAST(CHANGE)\n",
pr_debug("ex %016llx phy%02d originated BROADCAST(CHANGE)\n",
SAS_ADDR(dev->sas_addr), phy_id);
if (SAS_ADDR(changed_phy->attached_sas_addr) != 0) {
......
drivers/scsi/libsas/sas_init.c
View file @ 3c236f8c
......@@ -625,7 +625,7 @@ struct asd_sas_event *sas_alloc_event(struct asd_sas_phy *phy)
if (atomic_read(&phy->event_nr) > phy->ha->event_thres) {
if (i->dft->lldd_control_phy) {
if (cmpxchg(&phy->in_shutdown, 0, 1) == 0) {
pr_notice("The phy%02d bursting events, shut it down.\n",
pr_notice("The phy%d bursting events, shut it down.\n",
phy->id);
sas_notify_phy_event(phy, PHYE_SHUTDOWN);
}
......
drivers/scsi/libsas/sas_phy.c
View file @ 3c236f8c
......@@ -122,11 +122,10 @@ static void sas_phye_shutdown(struct work_struct *work)
phy->enabled = 0;
ret = i->dft->lldd_control_phy(phy, PHY_FUNC_DISABLE, NULL);
if (ret)
pr_notice("lldd disable phy%02d returned %d\n",
phy->id, ret);
pr_notice("lldd disable phy%d returned %d\n", phy->id,
ret);
} else
pr_notice("phy%02d is not enabled, cannot shutdown\n",
phy->id);
pr_notice("phy%d is not enabled, cannot shutdown\n", phy->id);
}
/* ---------- Phy class registration ---------- */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7