[ARM PATCH] 2161/1: S3C2410 - uncompressor low level uart configuration

Patch from Ben Dooks

Allow the uncompressing messages to be sent to the UART
specified in the kernel configuration, instead of just
UART 0. This includes the Kconfig update to make this
option available all the time, and to rename it's
description text.

This patch also fixes s3c2440 support for the
uncompressor

Signed-off-by: Ben Dooks 

arch/arm/Kconfig.debug

@@ -104,12 +104,15 @@ config DEBUG_S3C2410_PORT
 	  before it is used.
 
 config DEBUG_S3C2410_UART
-	depends on DEBUG_LL && ARCH_S3C2410
-	int "S3C2410 UART to use for low-level debug"
+	depends on ARCH_S3C2410
+	int "S3C2410 UART to use for low-level messages and debug"
 	default "0"
 	help
 	  Choice for UART for kernel low-level using S3C2410 UARTS,
 	  should be between zero and two. The port must have been
 	  initalised by the boot-loader before use.
 
+	  This will affect the port that the uncompressor code uses
+	  to send debug information to.
+
 endmenu

include/asm-arm/arch-s3c2410/uncompress.h

@@ -13,21 +13,29 @@
  *  22-May-2003 BJD  Created
  *  08-Sep-2003 BJD  Moved to linux v2.6
  *  12-Mar-2004 BJD  Updated header protection
+ *  12-Oct-2004 BJD  Take account of debug uart configuration
 */
 
 #ifndef __ASM_ARCH_UNCOMPRESS_H
 #define __ASM_ARCH_UNCOMPRESS_H
 
+#include <config/debug/s3c2410/port.h>
+
 /* defines for UART registers */
 #include "asm/arch/regs-serial.h"
+#include "asm/arch/regs-gpio.h"
 
 #include <asm/arch/map.h>
 
+/* working in physical space... */
+#undef S3C2410_GPIOREG
+#define S3C2410_GPIOREG(x) ((S3C2410_PA_GPIO + (x)))
+
 /* how many bytes we allow into the FIFO at a time in FIFO mode */
 #define FIFO_MAX	 (14)
 
 #if 1
-#define uart_base S3C2410_PA_UART
+#define uart_base S3C2410_PA_UART + (0x4000 * CONFIG_DEBUG_S3C2410_UART)
 #else
 static unsigned int uart_base = S3C2410_PA_UART;
 #endif
@@ -74,6 +82,10 @@ arch_decomp_setup(void)
 static void
 putc(char ch)
 {
+	int cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
+
+	cpuid &= S3C2410_GSTATUS1_IDMASK;
+
 	if (ch == '\n')
 		putc('\r');    /* expand newline to \r\n */
 
@@ -82,8 +94,14 @@ putc(char ch)
 
 		while (1) {
 			level = uart_rd(S3C2410_UFSTAT);
-			level &= S3C2410_UFSTAT_TXMASK;
-			level >>= S3C2410_UFSTAT_TXSHIFT;
+
+			if (cpuid == S3C2410_GSTATUS1_2440) {
+				level &= S3C2440_UFSTAT_TXMASK;
+				level >>= S3C2440_UFSTAT_TXSHIFT;
+			} else {
+				level &= S3C2410_UFSTAT_TXMASK;
+				level >>= S3C2410_UFSTAT_TXSHIFT;
+			}
 
 			if (level < FIFO_MAX)
 				break;
@@ -92,7 +110,7 @@ putc(char ch)
 	} else {
 		/* not using fifos */
 
-		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXFE) != S3C2410_UTRSTAT_TXFE);
+		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE);
 	}
 
 	/* write byte to transmission register */