Commit 3cc4a2fc authored by Ranjith Lohithakshan's avatar Ranjith Lohithakshan Committed by Paul Walmsley

AM35xx: Add clock support for new modules on AM35xx

This patch adds clock support for the following AM35xx modules
	- Ethernet MAC
	- CAN Controller (HECC)
	- New MUSB OTG Controller with integrated Phy
	- Video Processing Front End (VPFE)
	- Additional UART (UART4)
Signed-off-by: default avatarRanjith Lohithakshan <ranjithl@ti.com>
Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
parent 419cc97d
......@@ -39,6 +39,16 @@
*/
#define DPLL5_FREQ_FOR_USBHOST 120000000
/*
* In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
* in the same register at a bit offset of 0x8. The EN_ACK for ICK is
* at an offset of 4 from ICK enable bit.
*/
#define AM35XX_IPSS_ICK_MASK 0xF
#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4
#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8
#define AM35XX_IPSS_CLK_IDLEST_VAL 0
/* needed by omap3_core_dpll_m2_set_rate() */
struct clk *sdrc_ick_p, *arm_fck_p;
......@@ -144,6 +154,89 @@ const struct clkops omap3_clkops_noncore_dpll_ops = {
.disable = omap3_noncore_dpll_disable,
};
/**
* am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
* @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* The interface clocks on AM35xx IPSS reflects the clock idle status
* in the enable register itsel at a bit offset of 4 from the enable
* bit. A value of 1 indicates that clock is enabled.
*/
static void am35xx_clk_find_idlest(struct clk *clk,
void __iomem **idlest_reg,
u8 *idlest_bit,
u8 *idlest_val)
{
*idlest_reg = (__force void __iomem *)(clk->enable_reg);
*idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
*idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
}
/**
* am35xx_clk_find_companion - find companion clock to @clk
* @clk: struct clk * to find the companion clock of
* @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
* @other_bit: u8 ** to return the companion clock bit shift in
*
* Some clocks don't have companion clocks. For example, modules with
* only an interface clock (such as HECC) don't have a companion
* clock. Right now, this code relies on the hardware exporting a bit
* in the correct companion register that indicates that the
* nonexistent 'companion clock' is active. Future patches will
* associate this type of code with per-module data structures to
* avoid this issue, and remove the casts. No return value.
*/
static void am35xx_clk_find_companion(struct clk *clk, void __iomem **other_reg,
u8 *other_bit)
{
*other_reg = (__force void __iomem *)(clk->enable_reg);
if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
*other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
else
*other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
}
const struct clkops clkops_am35xx_ipss_module_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
.find_idlest = am35xx_clk_find_idlest,
.find_companion = am35xx_clk_find_companion,
};
/**
* am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
* @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* The IPSS target CM_IDLEST bit is at a different shift from the
* CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg
* and @idlest_bit. No return value.
*/
static void am35xx_clk_ipss_find_idlest(struct clk *clk,
void __iomem **idlest_reg,
u8 *idlest_bit,
u8 *idlest_val)
{
u32 r;
r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
*idlest_reg = (__force void __iomem *)r;
*idlest_bit = AM35XX_ST_IPSS_SHIFT;
*idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clkops clkops_am35xx_ipss_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
.find_idlest = am35xx_clk_ipss_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
{
/*
......
......@@ -22,4 +22,8 @@ extern const struct clkops clkops_omap3430es2_hsotgusb_wait;
extern const struct clkops clkops_omap3430es2_dss_usbhost_wait;
extern const struct clkops omap3_clkops_noncore_dpll_ops;
/* AM35xx-specific clkops */
extern const struct clkops clkops_am35xx_ipss_module_wait;
extern const struct clkops clkops_am35xx_ipss_wait;
#endif
......@@ -2983,6 +2983,113 @@ static struct clk wdt1_fck = {
.recalc = &followparent_recalc,
};
/* Clocks for AM35XX */
static struct clk ipss_ick = {
.name = "ipss_ick",
.ops = &clkops_am35xx_ipss_wait,
.parent = &core_l3_ick,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = AM35XX_EN_IPSS_SHIFT,
.recalc = &followparent_recalc,
};
static struct clk emac_ick = {
.name = "emac_ick",
.ops = &clkops_am35xx_ipss_module_wait,
.parent = &ipss_ick,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
.enable_bit = AM35XX_CPGMAC_VBUSP_CLK_SHIFT,
.recalc = &followparent_recalc,
};
static struct clk rmii_ck = {
.name = "rmii_ck",
.ops = &clkops_null,
.flags = RATE_FIXED,
.rate = 50000000,
};
static struct clk emac_fck = {
.name = "emac_fck",
.ops = &clkops_omap2_dflt,
.parent = &rmii_ck,
.enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
.enable_bit = AM35XX_CPGMAC_FCLK_SHIFT,
.recalc = &followparent_recalc,
};
static struct clk hsotgusb_ick_am35xx = {
.name = "hsotgusb_ick",
.ops = &clkops_am35xx_ipss_module_wait,
.parent = &ipss_ick,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
.enable_bit = AM35XX_USBOTG_VBUSP_CLK_SHIFT,
.recalc = &followparent_recalc,
};
static struct clk hsotgusb_fck_am35xx = {
.name = "hsotgusb_fck",
.ops = &clkops_omap2_dflt,
.parent = &sys_ck,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
.enable_bit = AM35XX_USBOTG_FCLK_SHIFT,
.recalc = &followparent_recalc,
};
static struct clk hecc_ck = {
.name = "hecc_ck",
.ops = &clkops_am35xx_ipss_module_wait,
.parent = &sys_ck,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
.enable_bit = AM35XX_HECC_VBUSP_CLK_SHIFT,
.recalc = &followparent_recalc,
};
static struct clk vpfe_ick = {
.name = "vpfe_ick",
.ops = &clkops_am35xx_ipss_module_wait,
.parent = &ipss_ick,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
.enable_bit = AM35XX_VPFE_VBUSP_CLK_SHIFT,
.recalc = &followparent_recalc,
};
static struct clk pclk_ck = {
.name = "pclk_ck",
.ops = &clkops_null,
.flags = RATE_FIXED,
.rate = 27000000,
};
static struct clk vpfe_fck = {
.name = "vpfe_fck",
.ops = &clkops_omap2_dflt,
.parent = &pclk_ck,
.enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
.enable_bit = AM35XX_VPFE_FCLK_SHIFT,
.recalc = &followparent_recalc,
};
/*
* The UART1/2 functional clock acts as the functional
* clock for UART4. No separate fclk control available.
*/
static struct clk uart4_ick_am35xx = {
.name = "uart4_ick",
.ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = AM35XX_EN_UART4_SHIFT,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
/*
* clkdev
......@@ -3209,6 +3316,17 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "secure_32k_fck", &secure_32k_fck, CK_3XXX),
CLK(NULL, "gpt12_fck", &gpt12_fck, CK_3XXX),
CLK(NULL, "wdt1_fck", &wdt1_fck, CK_3XXX),
CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX),
CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX),
CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX),
CLK("davinci_emac", "ick", &emac_ick, CK_AM35XX),
CLK("davinci_emac", "fck", &emac_fck, CK_AM35XX),
CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX),
CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX),
CLK("musb_hdrc", "ick", &hsotgusb_ick_am35xx, CK_AM35XX),
CLK("musb_hdrc", "fck", &hsotgusb_fck_am35xx, CK_AM35XX),
CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX),
CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX),
};
......
......@@ -168,6 +168,12 @@
#define OMAP3430_EN_SDRC (1 << 1)
#define OMAP3430_EN_SDRC_SHIFT 1
/* AM35XX specific CM_ICLKEN1_CORE bits */
#define AM35XX_EN_IPSS_MASK (1 << 4)
#define AM35XX_EN_IPSS_SHIFT 4
#define AM35XX_EN_UART4_MASK (1 << 23)
#define AM35XX_EN_UART4_SHIFT 23
/* CM_ICLKEN2_CORE */
#define OMAP3430_EN_PKA (1 << 4)
#define OMAP3430_EN_PKA_SHIFT 4
......@@ -220,6 +226,10 @@
#define OMAP3430_ST_SSI_STDBY_SHIFT 0
#define OMAP3430_ST_SSI_STDBY_MASK (1 << 0)
/* AM35xx specific CM_IDLEST1_CORE bits */
#define AM35XX_ST_IPSS_SHIFT 5
#define AM35XX_ST_IPSS_MASK (1 << 5)
/* CM_IDLEST2_CORE */
#define OMAP3430_ST_PKA_SHIFT 4
#define OMAP3430_ST_PKA_MASK (1 << 4)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment