Merge tag 'sunxi-dt-for-4.4-3' of...

Merge tag 'sunxi-dt-for-4.4-3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Allwinner DT changes for 4.4, round 3

A bunch of new boards, but mostly enable the support for the Audio Codec
on the older SoCs (A10, A10s, A13, A20, R8) and enable it on various
boards.

* tag 'sunxi-dt-for-4.4-3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  ARM: dts: sun6i: Add dts file for MSI Primo81 tablet
  ARM: dts: sun6i: Add simplefb node labels to reference at board level
  ARM: dts: sun4i: Enable audio codec on Marsboard A10.
  ARM: dts: sun4i: Add dts file for the pov protab2-ips9 tablet
  ARM: sun4i: Enable cubieboard audio codec
  ARM: sun5i: chip: Enable the audio codec
  ARM: sun4i: Enable audio-codec on Mele A1000
  ARM: sun7i: Enable cubieboard2 audio codec
  ARM: sun7i: dt: enable audio codec on Cubietruck
  ARM: sun7i: Add sunxi codec device node
  ARM: sun5i: Add the Audio codec DT node
  ARM: sun4i: Add sunxi codec device node
  ARM: sun7i: Add audio codec clock
  ARM: sun5i: Add audio codec clock
  ARM: sun4i: Add audio codec clock
  ARM: sun7i: Add audio PLL
  ARM: sun5i: Add audio PLL
  ARM: sun4i: Add audio PLL
  ARM: dts: sun7i: Enable USB DRC on pcDuino v3 Nano
  ARM: dts: sun6i: Add support for Sinlinx A31s SDK board
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/Makefile

@@ -603,7 +603,8 @@ dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-mk802ii.dtb \
 	sun4i-a10-olinuxino-lime.dtb \
 	sun4i-a10-pcduino.dtb \
-	sun4i-a10-pcduino2.dtb
+	sun4i-a10-pcduino2.dtb \
+	sun4i-a10-pov-protab2-ips9.dtb
 dtb-$(CONFIG_MACH_SUN5I) += \
 	sun5i-a10s-auxtek-t003.dtb \
 	sun5i-a10s-auxtek-t004.dtb \
@@ -626,6 +627,8 @@ dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31-m9.dtb \
 	sun6i-a31-mele-a1000g-quad.dtb \
 	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-primo81.dtb \
+	sun6i-a31s-sina31s.dtb \
 	sun6i-a31s-sinovoip-bpi-m2.dtb \
 	sun6i-a31s-yones-toptech-bs1078-v2.dtb
 dtb-$(CONFIG_MACH_SUN7I) += \

arch/arm/boot/dts/sun4i-a10-a1000.dts

@@ -93,6 +93,10 @@ &ahci {
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };

arch/arm/boot/dts/sun4i-a10-cubieboard.dts

@@ -83,6 +83,10 @@ &ahci {
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };

arch/arm/boot/dts/sun4i-a10-marsboard.dts

@@ -91,6 +91,10 @@ &ahci {
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };

arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts

+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Point of View Protab2-IPS9";
+	compatible = "pov,protab2-ips9", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	/* pull-ups and devices require AXP209 LDO3 */
+	status = "failed";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@400 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+
+	button@800 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -45,6 +45,7 @@
 
 #include <dt-bindings/thermal/thermal.h>
 
+#include <dt-bindings/clock/sun4i-a10-pll2.h>
 #include <dt-bindings/dma/sun4i-a10.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
@@ -195,6 +196,15 @@ pll1: clk@01c20000 {
 			clock-output-names = "pll1";
 		};
 
+		pll2: clk@01c20008 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll2-clk";
+			reg = <0x01c20008 0x8>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll2-1x", "pll2-2x",
+					     "pll2-4x", "pll2-8x";
+		};
+
 		pll4: clk@01c20018 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-a10-pll1-clk";
@@ -481,6 +491,14 @@ spi3_clk: clk@01c200d4 {
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi3";
 		};
+
+		codec_clk: clk@01c20140 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec-clk";
+			reg = <0x01c20140 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "codec";
+		};
 	};
 
 	soc@01c00000 {
@@ -1004,6 +1022,19 @@ lradc: lradc@01c22800 {
 			status = "disabled";
 		};
 
+		codec: codec@01c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <30>;
+			clocks = <&apb0_gates 0>, <&codec_clk>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		sid: eeprom@01c23800 {
 			compatible = "allwinner,sun4i-a10-sid";
 			reg = <0x01c23800 0x10>;

arch/arm/boot/dts/sun5i-r8-chip.dts

@@ -66,6 +66,10 @@ chosen {
 	};
 };
 
+&codec {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };

arch/arm/boot/dts/sun5i.dtsi

@@ -44,6 +44,7 @@
 
 #include "skeleton.dtsi"
 
+#include <dt-bindings/clock/sun4i-a10-pll2.h>
 #include <dt-bindings/dma/sun4i-a10.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
@@ -102,6 +103,15 @@ pll1: clk@01c20000 {
 			clock-output-names = "pll1";
 		};
 
+		pll2: clk@01c20008 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a13-pll2-clk";
+			reg = <0x01c20008 0x8>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll2-1x", "pll2-2x",
+					     "pll2-4x", "pll2-8x";
+		};
+
 		pll4: clk@01c20018 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-a10-pll1-clk";
@@ -285,6 +295,14 @@ usb_clk: clk@01c200cc {
 			clock-output-names = "usb_ohci0", "usb_phy";
 		};
 
+		codec_clk: clk@01c20140 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec-clk";
+			reg = <0x01c20140 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "codec";
+		};
+
 		mbus_clk: clk@01c2015c {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun5i-a13-mbus-clk";
@@ -571,6 +589,19 @@ lradc: lradc@01c22800 {
 			status = "disabled";
 		};
 
+		codec: codec@01c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <30>;
+			clocks = <&apb0_gates 0>, <&codec_clk>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		sid: eeprom@01c23800 {
 			compatible = "allwinner,sun4i-a10-sid";
 			reg = <0x01c23800 0x10>;

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -61,7 +61,7 @@ chosen {
 		#size-cells = <1>;
 		ranges;
 
-		framebuffer@0 {
+		simplefb_hdmi: framebuffer@0 {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
@@ -69,7 +69,7 @@ framebuffer@0 {
 			status = "disabled";
 		};
 
-		framebuffer@1 {
+		simplefb_lcd: framebuffer@1 {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";

arch/arm/boot/dts/sun6i-a31s-primo81.dts

+/*
+ * Copyright 2014 Siarhei Siamashka <siarhei.siamashka@gmail.com>
+ * Copyright 2015 Karsten Merker <merker@debian.org>
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "MSI Primo81 tablet";
+	compatible = "msi,primo81", "allwinner,sun6i-a31s";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	/* rtl8188etv wifi is connected here */
+	status = "okay";
+};
+
+&i2c0 {
+	/* pull-ups and device VDDIO use AXP221 DLDO3 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "failed";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	ctp@5d {
+		pinctrl-names = "default";
+		pinctrl-0 = <&gt911_int_primo81>;
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	accelerometer@1c {
+		pinctrl-names = "default";
+		pinctrl-0 = <&mma8452_int_primo81>;
+		compatible = "fsl,mma8452";
+		reg = <0x1c>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */
+		#io-channel-cells = <1>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button@158 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <158730>;
+	};
+
+	button@349 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <349206>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	gt911_int_primo81: gt911_int_pin@0 {
+		allwinner,pins = "PA3";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mma8452_int_primo81: mma8452_int_pin@0 {
+		allwinner,pins = "PA9";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	mmc0_cd_pin_primo81: mmc0_cd_pin@0 {
+		allwinner,pins = "PA8";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vddio-csi";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-mipi-bridge";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+	vdd-mipi-bridge-supply = <&reg_eldo3>;
+};
+
+&usb_otg {
+	/* otg support requires support for AXP221 usb-power-supply and GPIO */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+	status = "okay";
+};

arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi

+/*
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Sinlinx SinA31s Core Board";
+	compatible = "sinlinx,sina31s", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+/* eMMC on core board */
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+/* AXP221s PMIC on core board */
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+/* UART0 pads available on core board */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+

arch/arm/boot/dts/sun6i-a31s-sina31s.dts

+/*
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* The SinA31s development board has the SinA31s core board soldered on */
+#include "sun6i-a31s-sina31s-core.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Sinlinx SinA31s Development Board";
+	compatible = "sinlinx,sina31s-sdk", "allwinner,sun6i-a31s";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_sina31s>;
+
+		status {
+			label = "sina31s:status:usr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
+		};
+	};
+};
+
+&ehci0 {
+	/* USB 2.0 4 port hub IC */
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_dldo1>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button@158 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <158730>;
+	};
+
+	button@349 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <349206>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	led_pin_sina31s: led_pin@0 {
+		allwinner,pins = "PH13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_sina31s: mmc0_cd_pin@0 {
+		allwinner,pins = "PA4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-gmac-phy";
+};
+
+&usbphy {
+	status = "okay";
+};

arch/arm/boot/dts/sun7i-a20-cubieboard2.dts

@@ -84,6 +84,10 @@ &ahci {
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };

arch/arm/boot/dts/sun7i-a20-cubietruck.dts

@@ -101,6 +101,10 @@ &ahci {
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };

arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts

@@ -142,6 +142,10 @@ &ohci1 {
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 {
 		allwinner,pins = "PH2";
@@ -157,6 +161,13 @@ led_pins_pcduino3_nano: led_pins@0 {
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
 	usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 {
 		allwinner,pins = "PD2";
 		allwinner,function = "gpio_out";
@@ -211,7 +222,15 @@ &uart0 {
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -47,6 +47,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
 
+#include <dt-bindings/clock/sun4i-a10-pll2.h>
 #include <dt-bindings/dma/sun4i-a10.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
@@ -199,6 +200,15 @@ pll1: clk@01c20000 {
 			clock-output-names = "pll1";
 		};
 
+		pll2: clk@01c20008 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll2-clk";
+			reg = <0x01c20008 0x8>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll2-1x", "pll2-2x",
+					     "pll2-4x", "pll2-8x";
+		};
+
 		pll4: clk@01c20018 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun7i-a20-pll4-clk";
@@ -491,6 +501,14 @@ spi3_clk: clk@01c200d4 {
 			clock-output-names = "spi3";
 		};
 
+		codec_clk: clk@01c20140 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec-clk";
+			reg = <0x01c20140 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "codec";
+		};
+
 		mbus_clk: clk@01c2015c {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun5i-a13-mbus-clk";
@@ -1198,6 +1216,19 @@ lradc: lradc@01c22800 {
 			status = "disabled";
 		};
 
+		codec: codec@01c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun7i-a20-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 0>, <&codec_clk>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		sid: eeprom@01c23800 {
 			compatible = "allwinner,sun7i-a20-sid";
 			reg = <0x01c23800 0x200>;