Merge branch 'qed-misc'

Yuval Mintz says:

====================
qed*: Driver updates

Usually I try to provide a sensible description of the patch set even if
it lacks a general 'motif', but this simply contains several small,
unrelated and self-explenatory tweaks and additions.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qed/qed_main.c

@@ -29,10 +29,10 @@
 #include "qed_mcp.h"
 #include "qed_hw.h"
 
-static const char version[] =
-	"QLogic QL4xxx 40G/100G Ethernet Driver qed " DRV_MODULE_VERSION "\n";
+static char version[] =
+	"QLogic FastLinQ 4xxxx Core Module qed " DRV_MODULE_VERSION "\n";
 
-MODULE_DESCRIPTION("QLogic 25G/40G/50G/100G Core Module");
+MODULE_DESCRIPTION("QLogic FastLinQ 4xxxx Core Module");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
 
@@ -45,6 +45,8 @@ MODULE_VERSION(DRV_MODULE_VERSION);
 #define QED_FW_FILE_NAME	\
 	"qed/qed_init_values_zipped-" FW_FILE_VERSION ".bin"
 
+MODULE_FIRMWARE(QED_FW_FILE_NAME);
+
 static int __init qed_init(void)
 {
 	pr_notice("qed_init called\n");
@@ -97,12 +99,15 @@ static void qed_free_pci(struct qed_dev *cdev)
 	pci_disable_device(pdev);
 }
 
+#define PCI_REVISION_ID_ERROR_VAL	0xff
+
 /* Performs PCI initializations as well as initializing PCI-related parameters
  * in the device structrue. Returns 0 in case of success.
  */
 static int qed_init_pci(struct qed_dev *cdev,
 			struct pci_dev *pdev)
 {
+	u8 rev_id;
 	int rc;
 
 	cdev->pdev = pdev;
@@ -136,6 +141,14 @@ static int qed_init_pci(struct qed_dev *cdev,
 		pci_save_state(pdev);
 	}
 
+	pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
+	if (rev_id == PCI_REVISION_ID_ERROR_VAL) {
+		DP_NOTICE(cdev,
+			  "Detected PCI device error [rev_id 0x%x]. Probably due to prior indication. Aborting.\n",
+			  rev_id);
+		rc = -ENODEV;
+		goto err2;
+	}
 	if (!pci_is_pcie(pdev)) {
 		DP_NOTICE(cdev, "The bus is not PCI Express\n");
 		rc = -EIO;

drivers/net/ethernet/qlogic/qede/qede_main.c

@@ -39,10 +39,10 @@
 
 #include "qede.h"
 
-static const char version[] = "QLogic QL4xxx 40G/100G Ethernet Driver qede "
-			      DRV_MODULE_VERSION "\n";
+static char version[] =
+	"QLogic FastLinQ 4xxxx Ethernet Driver qede " DRV_MODULE_VERSION "\n";
 
-MODULE_DESCRIPTION("QLogic 40G/100G Ethernet Driver");
+MODULE_DESCRIPTION("QLogic FastLinQ 4xxxx Ethernet Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
 
@@ -53,7 +53,7 @@ MODULE_PARM_DESC(debug, " Default debug msglevel");
 static const struct qed_eth_ops *qed_ops;
 
 #define CHIP_NUM_57980S_40		0x1634
-#define CHIP_NUM_57980S_10		0x1635
+#define CHIP_NUM_57980S_10		0x1666
 #define CHIP_NUM_57980S_MF		0x1636
 #define CHIP_NUM_57980S_100		0x1644
 #define CHIP_NUM_57980S_50		0x1654
@@ -380,6 +380,28 @@ static int map_frag_to_bd(struct qede_dev *edev,
 	return 0;
 }
 
+/* +2 for 1st BD for headers and 2nd BD for headlen (if required) */
+#if ((MAX_SKB_FRAGS + 2) > ETH_TX_MAX_BDS_PER_NON_LSO_PACKET)
+static bool qede_pkt_req_lin(struct qede_dev *edev, struct sk_buff *skb,
+			     u8 xmit_type)
+{
+	int allowed_frags = ETH_TX_MAX_BDS_PER_NON_LSO_PACKET - 1;
+
+	if (xmit_type & XMIT_LSO) {
+		int hlen;
+
+		hlen = skb_transport_header(skb) +
+		       tcp_hdrlen(skb) - skb->data;
+
+		/* linear payload would require its own BD */
+		if (skb_headlen(skb) > hlen)
+			allowed_frags--;
+	}
+
+	return (skb_shinfo(skb)->nr_frags > allowed_frags);
+}
+#endif
+
 /* Main transmit function */
 static
 netdev_tx_t qede_start_xmit(struct sk_buff *skb,
@@ -407,16 +429,22 @@ netdev_tx_t qede_start_xmit(struct sk_buff *skb,
 	txq = QEDE_TX_QUEUE(edev, txq_index);
 	netdev_txq = netdev_get_tx_queue(ndev, txq_index);
 
-	/* Current code doesn't support SKB linearization, since the max number
-	 * of skb frags can be passed in the FW HSI.
-	 */
-	BUILD_BUG_ON(MAX_SKB_FRAGS > ETH_TX_MAX_BDS_PER_NON_LSO_PACKET);
-
 	WARN_ON(qed_chain_get_elem_left(&txq->tx_pbl) <
 			       (MAX_SKB_FRAGS + 1));
 
 	xmit_type = qede_xmit_type(edev, skb, &ipv6_ext);
 
+#if ((MAX_SKB_FRAGS + 2) > ETH_TX_MAX_BDS_PER_NON_LSO_PACKET)
+	if (qede_pkt_req_lin(edev, skb, xmit_type)) {
+		if (skb_linearize(skb)) {
+			DP_NOTICE(edev,
+				  "SKB linearization failed - silently dropping this SKB\n");
+			dev_kfree_skb_any(skb);
+			return NETDEV_TX_OK;
+		}
+	}
+#endif
+
 	/* Fill the entry in the SW ring and the BDs in the FW ring */
 	idx = txq->sw_tx_prod & NUM_TX_BDS_MAX;
 	txq->sw_tx_ring[idx].skb = skb;
@@ -2752,13 +2780,17 @@ static void qede_link_update(void *dev, struct qed_link_output *link)
 	}
 
 	if (link->link_up) {
-		DP_NOTICE(edev, "Link is up\n");
-		netif_tx_start_all_queues(edev->ndev);
-		netif_carrier_on(edev->ndev);
+		if (!netif_carrier_ok(edev->ndev)) {
+			DP_NOTICE(edev, "Link is up\n");
+			netif_tx_start_all_queues(edev->ndev);
+			netif_carrier_on(edev->ndev);
+		}
 	} else {
-		DP_NOTICE(edev, "Link is down\n");
-		netif_tx_disable(edev->ndev);
-		netif_carrier_off(edev->ndev);
+		if (netif_carrier_ok(edev->ndev)) {
+			DP_NOTICE(edev, "Link is down\n");
+			netif_tx_disable(edev->ndev);
+			netif_carrier_off(edev->ndev);
+		}
 	}
 }