Merge tag 'amlogic-dt64-2' of...

Merge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/late

Pull "Amlogic DT updates for v4.11, round 2" from Kevin Hilman:

- add SAR ADC driver
- add ADC laddered keys to meson-gxbb-p200 board

* tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM64: dts: meson-gxbb-p200: add ADC laddered keys
  ARM64: dts: meson: meson-gx: add the SAR ADC
  ARM64: dts: meson-gxl: add the pwm_ao_b pin
  ARM64: dts: meson-gx: add the missing pwm_AO_ab node
  clk: gxbb: fix CLKID_ETH defined twice
  ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
  clk: gxbb: add the SAR ADC clocks and expose them
  dt-bindings: amlogic: Add WeTek boards
  ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
  dt-bindings: vendor-prefix: Add wetek vendor prefix
  ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency
  ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes
  ARM64: dts: meson-gxbb-vega-s95: Add LED
  ARM64: dts: meson-gx: add the serial CTS and RTS pin groups
  ARM64: dts: meson-gx: add the missing uart_AO_B
  clk: meson-gxbb: Export HDMI clocks
  ARM64: dts: meson-gxm: add SCPI configuration for GXM
  ARM64: dts: meson-gx: move the SCPI and SRAM nodes to meson-gx

Documentation/devicetree/bindings/arm/amlogic.txt

@@ -40,6 +40,8 @@ Board compatible values:
   - "hardkernel,odroid-c2" (Meson gxbb)
   - "amlogic,p200" (Meson gxbb)
   - "amlogic,p201" (Meson gxbb)
+  - "wetek,hub" (Meson gxbb)
+  - "wetek,play2" (Meson gxbb)
   - "amlogic,p212" (Meson gxl s905x)
   - "amlogic,p230" (Meson gxl s905d)
   - "amlogic,p231" (Meson gxl s905d)

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -320,6 +320,7 @@ virtio	Virtual I/O Device Specification, developed by the OASIS consortium
 vivante	Vivante Corporation
 voipac	Voipac Technologies s.r.o.
 wd	Western Digital Corp.
+wetek	WeTek Electronics, limited.
 wexler	Wexler
 winbond Winbond Electronics corp.
 wlf	Wolfson Microelectronics

arch/arm64/boot/dts/amlogic/Makefile

@@ -5,12 +5,14 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxl-nexbox-a95x.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q200.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q201.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
 
 always		:= $(dtb-y)

arch/arm64/boot/dts/amlogic/meson-gx.dtsi

@@ -65,6 +65,7 @@ cpu0: cpu@0 {
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
 		};
 
 		cpu1: cpu@1 {
@@ -73,6 +74,7 @@ cpu1: cpu@1 {
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
 		};
 
 		cpu2: cpu@2 {
@@ -81,6 +83,7 @@ cpu2: cpu@2 {
 			reg = <0x0 0x2>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
 		};
 
 		cpu3: cpu@3 {
@@ -89,6 +92,7 @@ cpu3: cpu@3 {
 			reg = <0x0 0x3>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
 		};
 
 		l2: l2-cache0 {
@@ -153,6 +157,28 @@ bid: bid@46 {
 		};
 	};
 
+	scpi {
+		compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
+		mboxes = <&mailbox 1 &mailbox 2>;
+		shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+
+		scpi_clocks: clocks {
+			compatible = "arm,scpi-clocks";
+
+			scpi_dvfs: scpi_clocks@0 {
+				compatible = "arm,scpi-dvfs-clocks";
+				#clock-cells = <1>;
+				clock-indices = <0>;
+				clock-output-names = "vcpu";
+			};
+		};
+
+		scpi_sensors: sensors {
+			compatible = "arm,scpi-sensors";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -211,6 +237,14 @@ pwm_cd: pwm@8650 {
 				status = "disabled";
 			};
 
+			saradc: adc@8680 {
+				compatible = "amlogic,meson-saradc";
+				reg = <0x0 0x8680 0x0 0x34>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
 			pwm_ef: pwm@86c0 {
 				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
 				reg = <0x0 0x086c0 0x0 0x10>;
@@ -264,6 +298,25 @@ gic: interrupt-controller@c4301000 {
 			#address-cells = <0>;
 		};
 
+		sram: sram@c8000000 {
+			compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
+			reg = <0x0 0xc8000000 0x0 0x14000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0xc8000000 0x14000>;
+
+			cpu_scp_lpri: scp-shmem@0 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
+				reg = <0x13000 0x400>;
+			};
+
+			cpu_scp_hpri: scp-shmem@200 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
+				reg = <0x13400 0x400>;
+			};
+		};
+
 		aobus: aobus@c8100000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xc8100000 0x0 0x100000>;
@@ -279,6 +332,21 @@ uart_AO: serial@4c0 {
 				status = "disabled";
 			};
 
+			uart_AO_B: serial@4e0 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x004e0 0x0 0x14>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+
+			pwm_AO_ab: pwm@550 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x00550 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
 			ir: ir@580 {
 				compatible = "amlogic,meson-gxbb-ir";
 				reg = <0x0 0x00580 0x0 0x40>;

arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts

@@ -45,10 +45,55 @@
 /dts-v1/;
 
 #include "meson-gxbb-p20x.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	compatible = "amlogic,p200", "amlogic,meson-gxbb";
 	model = "Amlogic Meson GXBB P200 Development Board";
+
+	avdd18_usb_adc: regulator-avdd18_usb_adc {
+		compatible = "regulator-fixed";
+		regulator-name = "AVDD18_USB_ADC";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	adc_keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-home {
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			press-threshold-microvolt = <900000>; /* 50% */
+		};
+
+		button-esc {
+			label = "Esc";
+			linux,code = <KEY_ESC>;
+			press-threshold-microvolt = <684000>; /* 38% */
+		};
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <468000>; /* 26% */
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <252000>; /* 14% */
+		};
+
+		button-menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <0>; /* 0% */
+		};
+	};
 };
 
 &i2c_B {
@@ -56,3 +101,8 @@ &i2c_B {
 	pinctrl-0 = <&i2c_b_pins>;
 	pinctrl-names = "default";
 };
+
+&saradc {
+	status = "okay";
+	vref-supply = <&avdd18_usb_adc>;
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi

@@ -53,6 +53,17 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "vega-s95:blue:on";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
 	usb_vbus: regulator-usb0-vbus {
 		compatible = "regulator-fixed";
 

arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts

+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+
+/ {
+	compatible = "wetek,hub", "amlogic,meson-gxbb";
+	model = "WeTek Hub";
+
+	leds {
+		compatible = "gpio-leds";
+
+		system {
+			label = "wetek-play:system-status";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	cvbs-connector {
+		status = "disabled";
+	};
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts

+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "wetek,play2", "amlogic,meson-gxbb";
+	model = "WeTek Play 2";
+
+	leds {
+		compatible = "gpio-leds";
+
+		system {
+			label = "wetek-play:system-status";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+
+		wifi {
+			label = "wetek-play:wifi-status";
+			gpios = <&gpio GPIODV_26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		ethernet {
+			label = "wetek-play:ethernet-status";
+			gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button@0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};

arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi

@@ -50,28 +50,6 @@
 / {
 	compatible = "amlogic,meson-gxbb";
 
-	scpi {
-		compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
-		mboxes = <&mailbox 1 &mailbox 2>;
-		shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
-
-		clocks {
-			compatible = "arm,scpi-clocks";
-
-			scpi_dvfs: scpi_clocks@0 {
-				compatible = "arm,scpi-dvfs-clocks";
-				#clock-cells = <1>;
-				clock-indices = <0>;
-				clock-output-names = "vcpu";
-			};
-		};
-
-		scpi_sensors: sensors {
-			compatible = "arm,scpi-sensors";
-			#thermal-sensor-cells = <1>;
-		};
-	};
-
 	soc {
 		usb0_phy: phy@c0000000 {
 			compatible = "amlogic,meson-gxbb-usb2-phy";
@@ -93,25 +71,6 @@ usb1_phy: phy@c0000020 {
 			status = "disabled";
 		};
 
-		sram: sram@c8000000 {
-			compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
-			reg = <0x0 0xc8000000 0x0 0x14000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x0 0xc8000000 0x14000>;
-
-			cpu_scp_lpri: scp-shmem@0 {
-				compatible = "amlogic,meson-gxbb-scp-shmem";
-				reg = <0x13000 0x400>;
-			};
-
-			cpu_scp_hpri: scp-shmem@200 {
-				compatible = "amlogic,meson-gxbb-scp-shmem";
-				reg = <0x13400 0x400>;
-			};
-		};
-
 		usb0: usb@c9000000 {
 			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
 			reg = <0x0 0xc9000000 0x0 0x40000>;
@@ -138,22 +97,6 @@ usb1: usb@c9100000 {
 	};
 };
 
-&cpu0 {
-	clocks = <&scpi_dvfs 0>;
-};
-
-&cpu1 {
-	clocks = <&scpi_dvfs 0>;
-};
-
-&cpu2 {
-	clocks = <&scpi_dvfs 0>;
-};
-
-&cpu3 {
-	clocks = <&scpi_dvfs 0>;
-};
-
 &cbus {
 	spifc: spi@8c80 {
 		compatible = "amlogic,meson-gxbb-spifc";
@@ -195,6 +138,29 @@ mux {
 			};
 		};
 
+		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+			mux {
+				groups = "uart_cts_ao_a",
+				       "uart_rts_ao_a";
+				function = "uart_ao";
+			};
+		};
+
+		uart_ao_b_pins: uart_ao_b {
+			mux {
+				groups = "uart_tx_ao_b", "uart_rx_ao_b";
+				function = "uart_ao_b";
+			};
+		};
+
+		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+			mux {
+				groups = "uart_cts_ao_b",
+				       "uart_rts_ao_b";
+				function = "uart_ao_b";
+			};
+		};
+
 		remote_input_ao_pins: remote_input_ao {
 			mux {
 				groups = "remote_input_ao";
@@ -340,6 +306,14 @@ mux {
 			};
 		};
 
+		uart_a_cts_rts_pins: uart_a_cts_rts {
+			mux {
+				groups = "uart_cts_a",
+				       "uart_rts_a";
+				function = "uart_a";
+			};
+		};
+
 		uart_b_pins: uart_b {
 			mux {
 				groups = "uart_tx_b",
@@ -348,6 +322,14 @@ mux {
 			};
 		};
 
+		uart_b_cts_rts_pins: uart_b_cts_rts {
+			mux {
+				groups = "uart_cts_b",
+				       "uart_rts_b";
+				function = "uart_b";
+			};
+		};
+
 		uart_c_pins: uart_c {
 			mux {
 				groups = "uart_tx_c",
@@ -356,6 +338,14 @@ mux {
 			};
 		};
 
+		uart_c_cts_rts_pins: uart_c_cts_rts {
+			mux {
+				groups = "uart_cts_c",
+				       "uart_rts_c";
+				function = "uart_c";
+			};
+		};
+
 		i2c_a_pins: i2c_a {
 			mux {
 				groups = "i2c_sck_a",
@@ -463,6 +453,20 @@ mux {
 				function = "pwm_f_y";
 			};
 		};
+
+		hdmi_hpd_pins: hdmi_hpd {
+			mux {
+				groups = "hdmi_hpd";
+				function = "hdmi_hpd";
+			};
+		};
+
+		hdmi_i2c_pins: hdmi_i2c {
+			mux {
+				groups = "hdmi_sda", "hdmi_scl";
+				function = "hdmi_i2c";
+			};
+		};
 	};
 };
 
@@ -486,6 +490,16 @@ &i2c_C {
 	clocks = <&clkc CLKID_I2C>;
 };
 
+&saradc {
+	compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_SAR_ADC>,
+		 <&clkc CLKID_SANA>,
+		 <&clkc CLKID_SAR_ADC_CLK>,
+		 <&clkc CLKID_SAR_ADC_SEL>;
+	clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
+};
+
 &sd_emmc_a {
 	clocks = <&clkc CLKID_SD_EMMC_A>,
 		 <&xtal>,

arch/arm64/boot/dts/amlogic/meson-gxl.dtsi

@@ -88,12 +88,42 @@ mux {
 			};
 		};
 
+		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+			mux {
+				groups = "uart_cts_ao_a",
+				       "uart_rts_ao_a";
+				function = "uart_ao";
+			};
+		};
+
+		uart_ao_b_pins: uart_ao_b {
+			mux {
+				groups = "uart_tx_ao_b", "uart_rx_ao_b";
+				function = "uart_ao_b";
+			};
+		};
+
+		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+			mux {
+				groups = "uart_cts_ao_b",
+				       "uart_rts_ao_b";
+				function = "uart_ao_b";
+			};
+		};
+
 		remote_input_ao_pins: remote_input_ao {
 			mux {
 				groups = "remote_input_ao";
 				function = "remote_input_ao";
 			};
 		};
+
+		pwm_ao_b_pins: pwm_ao_b {
+			mux {
+				groups = "pwm_ao_b";
+				function = "pwm_ao_b";
+			};
+		};
 	};
 };
 
@@ -163,6 +193,14 @@ mux {
 			};
 		};
 
+		uart_a_cts_rts_pins: uart_a_cts_rts {
+			mux {
+				groups = "uart_cts_a",
+				       "uart_rts_a";
+				function = "uart_a";
+			};
+		};
+
 		uart_b_pins: uart_b {
 			mux {
 				groups = "uart_tx_b",
@@ -171,6 +209,14 @@ mux {
 			};
 		};
 
+		uart_b_cts_rts_pins: uart_b_cts_rts {
+			mux {
+				groups = "uart_cts_b",
+				       "uart_rts_b";
+				function = "uart_b";
+			};
+		};
+
 		uart_c_pins: uart_c {
 			mux {
 				groups = "uart_tx_c",
@@ -179,6 +225,14 @@ mux {
 			};
 		};
 
+		uart_c_cts_rts_pins: uart_c_cts_rts {
+			mux {
+				groups = "uart_cts_c",
+				       "uart_rts_c";
+				function = "uart_c";
+			};
+		};
+
 		i2c_a_pins: i2c_a {
 			mux {
 				groups = "i2c_sck_a",
@@ -229,6 +283,20 @@ mux {
 				function = "pwm_e";
 			};
 		};
+
+		hdmi_hpd_pins: hdmi_hpd {
+			mux {
+				groups = "hdmi_hpd";
+				function = "hdmi_hpd";
+			};
+		};
+
+		hdmi_i2c_pins: hdmi_i2c {
+			mux {
+				groups = "hdmi_sda", "hdmi_scl";
+				function = "hdmi_i2c";
+			};
+		};
 	};
 
 	eth-phy-mux {
@@ -279,6 +347,16 @@ &i2c_C {
 	clocks = <&clkc CLKID_I2C>;
 };
 
+&saradc {
+	compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_SAR_ADC>,
+		 <&clkc CLKID_SANA>,
+		 <&clkc CLKID_SAR_ADC_CLK>,
+		 <&clkc CLKID_SAR_ADC_SEL>;
+	clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
+};
+
 &sd_emmc_a {
 	clocks = <&clkc CLKID_SD_EMMC_A>,
 		 <&xtal>,

arch/arm64/boot/dts/amlogic/meson-gxm.dtsi

@@ -85,6 +85,7 @@ cpu4: cpu@100 {
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
 		};
 
 		cpu5: cpu@101 {
@@ -93,6 +94,7 @@ cpu5: cpu@101 {
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
 		};
 
 		cpu6: cpu@102 {
@@ -101,6 +103,7 @@ cpu6: cpu@102 {
 			reg = <0x0 0x102>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
 		};
 
 		cpu7: cpu@103 {
@@ -109,10 +112,21 @@ cpu7: cpu@103 {
 			reg = <0x0 0x103>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
 		};
 	};
 };
 
+&saradc {
+	compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc";
+};
+
+&scpi_dvfs {
+	clock-indices = <0 1>;
+	clock-output-names = "vbig", "vlittle";
+};
+
 &vpu {
 	compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
 };
+

drivers/clk/meson/gxbb.c

@@ -564,6 +564,46 @@ static struct clk_gate gxbb_clk81 = {
 	},
 };
 
+static struct clk_mux gxbb_sar_adc_clk_sel = {
+	.reg = (void *)HHI_SAR_CLK_CNTL,
+	.mask = 0x3,
+	.shift = 9,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "sar_adc_clk_sel",
+		.ops = &clk_mux_ops,
+		/* NOTE: The datasheet doesn't list the parents for bit 10 */
+		.parent_names = (const char *[]){ "xtal", "clk81", },
+		.num_parents = 2,
+	},
+};
+
+static struct clk_divider gxbb_sar_adc_clk_div = {
+	.reg = (void *)HHI_SAR_CLK_CNTL,
+	.shift = 0,
+	.width = 8,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "sar_adc_clk_div",
+		.ops = &clk_divider_ops,
+		.parent_names = (const char *[]){ "sar_adc_clk_sel" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_gate gxbb_sar_adc_clk = {
+	.reg = (void *)HHI_SAR_CLK_CNTL,
+	.bit_idx = 8,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "sar_adc_clk",
+		.ops = &clk_gate_ops,
+		.parent_names = (const char *[]){ "sar_adc_clk_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
 /* Everything Else (EE) domain gates */
 static MESON_GATE(gxbb_ddr, HHI_GCLK_MPEG0, 0);
 static MESON_GATE(gxbb_dos, HHI_GCLK_MPEG0, 1);
@@ -754,6 +794,9 @@ static struct clk_hw_onecell_data gxbb_hw_onecell_data = {
 		[CLKID_SD_EMMC_A]	    = &gxbb_emmc_a.hw,
 		[CLKID_SD_EMMC_B]	    = &gxbb_emmc_b.hw,
 		[CLKID_SD_EMMC_C]	    = &gxbb_emmc_c.hw,
+		[CLKID_SAR_ADC_CLK]	    = &gxbb_sar_adc_clk.hw,
+		[CLKID_SAR_ADC_SEL]	    = &gxbb_sar_adc_clk_sel.hw,
+		[CLKID_SAR_ADC_DIV]	    = &gxbb_sar_adc_clk_div.hw,
 	},
 	.num = NR_CLKS,
 };
@@ -856,6 +899,7 @@ static struct clk_gate *gxbb_clk_gates[] = {
 	&gxbb_emmc_a,
 	&gxbb_emmc_b,
 	&gxbb_emmc_c,
+	&gxbb_sar_adc_clk,
 };
 
 static int gxbb_clkc_probe(struct platform_device *pdev)
@@ -888,6 +932,10 @@ static int gxbb_clkc_probe(struct platform_device *pdev)
 	gxbb_mpeg_clk_sel.reg = clk_base + (u64)gxbb_mpeg_clk_sel.reg;
 	gxbb_mpeg_clk_div.reg = clk_base + (u64)gxbb_mpeg_clk_div.reg;
 
+	/* Populate the base address for the SAR ADC clks */
+	gxbb_sar_adc_clk_sel.reg = clk_base + (u64)gxbb_sar_adc_clk_sel.reg;
+	gxbb_sar_adc_clk_div.reg = clk_base + (u64)gxbb_sar_adc_clk_div.reg;
+
 	/* Populate base address for gates */
 	for (i = 0; i < ARRAY_SIZE(gxbb_clk_gates); i++)
 		gxbb_clk_gates[i]->reg = clk_base +

drivers/clk/meson/gxbb.h

@@ -191,7 +191,7 @@
 #define CLKID_PERIPHS		  20
 #define CLKID_SPICC		  21
 /* CLKID_I2C */
-#define CLKID_SAR_ADC		  23
+/* #define CLKID_SAR_ADC */
 #define CLKID_SMART_CARD	  24
 #define CLKID_RNG0		  25
 #define CLKID_UART0		  26
@@ -204,7 +204,7 @@
 #define CLKID_ASSIST_MISC	  33
 /* CLKID_SPI */
 #define CLKID_I2S_SPDIF		  35
-#define CLKID_ETH		  36
+/* CLKID_ETH */
 #define CLKID_DEMUX		  37
 #define CLKID_AIU_GLUE		  38
 #define CLKID_IEC958		  39
@@ -231,13 +231,13 @@
 #define CLKID_AHB_DATA_BUS	  60
 #define CLKID_AHB_CTRL_BUS	  61
 #define CLKID_HDMI_INTR_SYNC	  62
-#define CLKID_HDMI_PCLK		  63
+/* CLKID_HDMI_PCLK */
 /* CLKID_USB1_DDR_BRIDGE */
 /* CLKID_USB0_DDR_BRIDGE */
 #define CLKID_MMC_PCLK		  66
 #define CLKID_DVIN		  67
 #define CLKID_UART2		  68
-#define CLKID_SANA		  69
+/* #define CLKID_SANA */
 #define CLKID_VPU_INTR		  70
 #define CLKID_SEC_AHB_AHB3_BRIDGE 71
 #define CLKID_CLK81_A53		  72
@@ -245,7 +245,7 @@
 #define CLKID_VCLK2_VENCI1	  74
 #define CLKID_VCLK2_VENCP0	  75
 #define CLKID_VCLK2_VENCP1	  76
-#define CLKID_GCLK_VENCI_INT0	  77
+/* CLKID_GCLK_VENCI_INT0 */
 #define CLKID_GCLK_VENCI_INT	  78
 #define CLKID_DAC_CLK		  79
 #define CLKID_AOCLK_GATE	  80
@@ -265,8 +265,11 @@
 /* CLKID_SD_EMMC_A */
 /* CLKID_SD_EMMC_B */
 /* CLKID_SD_EMMC_C */
+/* CLKID_SAR_ADC_CLK */
+/* CLKID_SAR_ADC_SEL */
+#define CLKID_SAR_ADC_DIV	  99
 
-#define NR_CLKS			  97
+#define NR_CLKS			  100
 
 /* include the CLKIDs that have been made part of the stable DT binding */
 #include <dt-bindings/clock/gxbb-clkc.h>

include/dt-bindings/clock/gxbb-clkc.h

@@ -14,15 +14,21 @@
 #define CLKID_MPLL2		15
 #define CLKID_SPI		34
 #define CLKID_I2C		22
+#define CLKID_SAR_ADC		23
 #define CLKID_ETH		36
 #define CLKID_USB0		50
 #define CLKID_USB1		51
 #define CLKID_USB		55
+#define CLKID_HDMI_PCLK		63
 #define CLKID_USB1_DDR_BRIDGE	64
 #define CLKID_USB0_DDR_BRIDGE	65
+#define CLKID_SANA		69
+#define CLKID_GCLK_VENCI_INT0	77
 #define CLKID_AO_I2C		93
 #define CLKID_SD_EMMC_A		94
 #define CLKID_SD_EMMC_B		95
 #define CLKID_SD_EMMC_C		96
+#define CLKID_SAR_ADC_CLK	97
+#define CLKID_SAR_ADC_SEL	98
 
 #endif /* __GXBB_CLKC_H */