[PATCH] sh: ST40 updates

This includes some ST40 updates from the ST tree.  The most notable change is
the ST40GX1 fixes for INTC2-based interrupts.
Signed-off-by: Alex Bennee <kernel-hacker@bennee.com>
Signed-off-by: Paul Mundt <paul.mundt@nokia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arch/sh/boards/harp/setup.c

@@ -54,3 +54,38 @@ int __init platform_setup(void)
 
 	return 0;
 }
+
+/*
+ * pcibios_map_platform_irq
+ *
+ * This is board specific and returns the IRQ for a given PCI device.
+ * It is used by the PCI code (arch/sh/kernel/st40_pci*)
+ *
+ */
+
+#define HARP_PCI_IRQ    1
+#define HARP_BRIDGE_IRQ 2
+#define OVERDRIVE_SLOT0_IRQ 0
+
+
+int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	switch (slot) {
+#ifdef CONFIG_SH_STB1_HARP
+	case 2:		/*This is the PCI slot on the */
+		return HARP_PCI_IRQ;
+	case 1:		/* this is the bridge */
+		return HARP_BRIDGE_IRQ;
+#elif defined(CONFIG_SH_STB1_OVERDRIVE)
+	case 1:
+	case 2:
+	case 3:
+		return slot - 1;
+#else
+#error Unknown board
+#endif
+	default:
+		return -1;
+	}
+}
+

arch/sh/kernel/cpu/irq_ipr.c

@@ -19,6 +19,7 @@
 #include <linux/config.h>
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <linux/module.h>
 
 #include <asm/system.h>
 #include <asm/io.h>
@@ -41,7 +42,7 @@ static void mask_and_ack_ipr(unsigned int);
 static void end_ipr_irq(unsigned int irq);
 
 static unsigned int startup_ipr_irq(unsigned int irq)
-{ 
+{
 	enable_ipr_irq(irq);
 	return 0; /* never anything pending */
 }
@@ -281,6 +282,10 @@ void __init init_IRQ(void)
 #endif /* !CONFIG_CPU_SUBTYPE_SH7300 */
 #endif /* CONFIG_CPU_SUBTYPE_SH7707 || CONFIG_CPU_SUBTYPE_SH7709  || CONFIG_CPU_SUBTYPE_SH7300*/
 
+#ifdef CONFIG_CPU_SUBTYPE_ST40
+	init_IRQ_intc2();
+#endif
+
 	/* Perform the machine specific initialisation */
 	if (sh_mv.mv_init_irq != NULL) {
 		sh_mv.mv_init_irq();
@@ -329,3 +334,6 @@ int ipr_irq_demux(int irq)
 	return irq;
 }
 #endif
+
+EXPORT_SYMBOL(make_ipr_irq);
+

arch/sh/kernel/cpu/sh4/irq_intc2.c

@@ -22,8 +22,11 @@
 
 
 struct intc2_data {
-	unsigned int addr;	/* Address of Interrupt Priority Register */
-	int mask; /*Mask to apply */
+	unsigned char msk_offset;
+	unsigned char msk_shift;
+#ifdef CONFIG_CPU_SUBTYPE_ST40
+	int (*clear_irq) (int);
+#endif
 };
 
 
@@ -56,33 +59,34 @@ static struct hw_interrupt_type intc2_irq_type = {
 
 static void disable_intc2_irq(unsigned int irq)
 {
-	unsigned addr;
-	int offset=irq-INTC2_FIRST_IRQ;
-	unsigned val,flags;
+	int irq_offset = irq - INTC2_FIRST_IRQ;
+	int msk_shift, msk_offset;
 
 	// Sanity check
-	if(offset<0 || offset>=NR_INTC2_IRQS) return;
-
-	addr=intc2_data[offset].addr+INTC2_INTMSK_OFFSET;
+	if((irq_offset<0) || (irq_offset>=NR_INTC2_IRQS))
+		return;
 
-	local_irq_save(flags);
-	val=ctrl_inl(addr);
-	val|=intc2_data[offset].mask;
-	ctrl_outl(val,addr);
+	msk_shift = intc2_data[irq_offset].msk_shift;
+	msk_offset = intc2_data[irq_offset].msk_offset;
 
-	local_irq_restore(flags);
+	ctrl_outl(1<<msk_shift,
+		  INTC2_BASE+INTC2_INTMSK_OFFSET+msk_offset);
 }
 
 static void enable_intc2_irq(unsigned int irq)
 {
-	int offset=irq-INTC2_FIRST_IRQ;
+	int irq_offset = irq - INTC2_FIRST_IRQ;
+	int msk_shift, msk_offset;
 
-	// Sanity check
-	if(offset<0 || offset>=NR_INTC2_IRQS) return;
+	/* Sanity check */
+	if((irq_offset<0) || (irq_offset>=NR_INTC2_IRQS))
+		return;
 
-	ctrl_outl(intc2_data[offset].mask,
-		  intc2_data[offset].addr+INTC2_INTMSKCLR_OFFSET);
+	msk_shift = intc2_data[irq_offset].msk_shift;
+	msk_offset = intc2_data[irq_offset].msk_offset;
 
+	ctrl_outl(1<<msk_shift,
+		  INTC2_BASE+INTC2_INTMSKCLR_OFFSET+msk_offset);
 }
 
 static void mask_and_ack_intc2(unsigned int irq)
@@ -94,28 +98,52 @@ static void end_intc2_irq(unsigned int irq)
 {
 	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
 		enable_intc2_irq(irq);
+
+#ifdef CONFIG_CPU_SUBTYPE_ST40
+	if (intc2_data[irq - INTC2_FIRST_IRQ].clear_irq)
+		intc2_data[irq - INTC2_FIRST_IRQ].clear_irq (irq);
+#endif
 }
 
-void make_intc2_irq(unsigned int irq, unsigned int addr, 
-		    unsigned int group,int pos, int priority)
+/*
+ * Setup an INTC2 style interrupt.
+ * NOTE: Unlike IPR interrupts, parameters are not shifted by this code,
+ * allowing the use of the numbers straight out of the datasheet.
+ * For example:
+ *    PIO1 which is INTPRI00[19,16] and INTMSK00[13]
+ * would be:               ^     ^             ^  ^
+ *                         |     |             |  |
+ *    make_intc2_irq(84,   0,   16,            0, 13);
+ */
+void make_intc2_irq(unsigned int irq,
+		    unsigned int ipr_offset, unsigned int ipr_shift,
+		    unsigned int msk_offset, unsigned int msk_shift,
+		    unsigned int priority)
 {
-	int offset=irq-INTC2_FIRST_IRQ;
-	unsigned flags,val;
+	int irq_offset = irq - INTC2_FIRST_IRQ;
+	unsigned int flags;
+	unsigned long ipr;
 
-	if(offset<0 || offset>=NR_INTC2_IRQS) {
+	if((irq_offset<0) || (irq_offset>=NR_INTC2_IRQS))
 		return;
-	}
 
 	disable_irq_nosync(irq);
+
 	/* Fill the data we need */
-	intc2_data[offset].addr=addr;
-	intc2_data[offset].mask=1<<pos;
+	intc2_data[irq_offset].msk_offset = msk_offset;
+	intc2_data[irq_offset].msk_shift  = msk_shift;
+#ifdef CONFIG_CPU_SUBTYPE_ST40
+	intc2_data[irq_offset].clear_irq = NULL;
+#endif
 		
 	/* Set the priority level */
 	local_irq_save(flags);
-	val=ctrl_inl(addr+INTC2_INTPRI_OFFSET);
-	val|=(priority)<< (group<<4);
-	ctrl_outl(val,addr+INTC2_INTPRI_OFFSET);
+
+	ipr=ctrl_inl(INTC2_BASE+INTC2_INTPRI_OFFSET+ipr_offset);
+	ipr&=~(0xf<<ipr_shift);
+	ipr|=(priority)<<ipr_shift;
+	ctrl_outl(ipr, INTC2_BASE+INTC2_INTPRI_OFFSET+ipr_offset);
+
 	local_irq_restore(flags);
 
 	irq_desc[irq].handler=&intc2_irq_type;
@@ -123,5 +151,72 @@ void make_intc2_irq(unsigned int irq, unsigned int addr,
 	disable_intc2_irq(irq);
 }
 
+#ifdef CONFIG_CPU_SUBTYPE_ST40
 
+struct intc2_init {
+	unsigned short irq;
+	unsigned char ipr_offset, ipr_shift;
+	unsigned char msk_offset, msk_shift;
+};
+
+static struct intc2_init intc2_init_data[]  __initdata = {
+	{64,  0,  0, 0,  0},	/* PCI serr */
+	{65,  0,  4, 0,  1},	/* PCI err */
+	{66,  0,  4, 0,  2},	/* PCI ad */
+	{67,  0,  4, 0,  3},	/* PCI pwd down */
+	{72,  0,  8, 0,  5},	/* DMAC INT0 */
+	{73,  0,  8, 0,  6},	/* DMAC INT1 */
+	{74,  0,  8, 0,  7},	/* DMAC INT2 */
+	{75,  0,  8, 0,  8},	/* DMAC INT3 */
+	{76,  0,  8, 0,  9},	/* DMAC INT4 */
+	{78,  0,  8, 0, 11},	/* DMAC ERR */
+	{80,  0, 12, 0, 12},	/* PIO0 */
+	{84,  0, 16, 0, 13},	/* PIO1 */
+	{88,  0, 20, 0, 14},	/* PIO2 */
+	{112, 4,  0, 4,  0},	/* Mailbox */
+#ifdef CONFIG_CPU_SUBTYPE_ST40GX1
+	{116, 4,  4, 4,  4},	/* SSC0 */
+	{120, 4,  8, 4,  8},	/* IR Blaster */
+	{124, 4, 12, 4, 12},	/* USB host */
+	{128, 4, 16, 4, 16},	/* Video processor BLITTER */
+	{132, 4, 20, 4, 20},	/* UART0 */
+	{134, 4, 20, 4, 22},	/* UART2 */
+	{136, 4, 24, 4, 24},	/* IO_PIO0 */
+	{140, 4, 28, 4, 28},	/* EMPI */
+	{144, 8,  0, 8,  0},	/* MAFE */
+	{148, 8,  4, 8,  4},	/* PWM */
+	{152, 8,  8, 8,  8},	/* SSC1 */
+	{156, 8, 12, 8, 12},	/* IO_PIO1 */
+	{160, 8, 16, 8, 16},	/* USB target */
+	{164, 8, 20, 8, 20},	/* UART1 */
+	{168, 8, 24, 8, 24},	/* Teletext */
+	{172, 8, 28, 8, 28},	/* VideoSync VTG */
+	{173, 8, 28, 8, 29},	/* VideoSync DVP0 */
+	{174, 8, 28, 8, 30},	/* VideoSync DVP1 */
+#endif
+};
+
+void __init init_IRQ_intc2(void)
+{
+	struct intc2_init *p;
+
+	printk(KERN_ALERT "init_IRQ_intc2\n");
+
+	for (p = intc2_init_data;
+	     p<intc2_init_data+ARRAY_SIZE(intc2_init_data);
+	     p++) {
+		make_intc2_irq(p->irq, p->ipr_offset, p->ipr_shift,
+			       p-> msk_offset, p->msk_shift, 13);
+	}
+}
+
+/* Adds a termination callback to the interrupt */
+void intc2_add_clear_irq(int irq, int (*fn)(int))
+{
+	if (irq < INTC2_FIRST_IRQ)
+		return;
+
+	intc2_data[irq - INTC2_FIRST_IRQ].clear_irq = fn;
+}
 
+#endif /* CONFIG_CPU_SUBTYPE_ST40 */