Merge tag 'for-linus-5.5a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen updates from Juergen Gross:

 - a small series to remove the build constraint of Xen x86 MCE handling
   to 64-bit only

 - a bunch of minor cleanups

* tag 'for-linus-5.5a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: Fix Kconfig indentation
  xen/mcelog: also allow building for 32-bit kernels
  xen/mcelog: add PPIN to record when available
  xen/mcelog: drop __MC_MSR_MCGCAP
  xen/gntdev: Use select for DMA_SHARED_BUFFER
  xen: mm: make xen_mm_init static
  xen: mm: include <xen/xen-ops.h> for missing declarations

arch/arm/xen/mm.c

@@ -15,6 +15,7 @@
 #include <xen/interface/grant_table.h>
 #include <xen/interface/memory.h>
 #include <xen/page.h>
+#include <xen/xen-ops.h>
 #include <xen/swiotlb-xen.h>
 
 #include <asm/cacheflush.h>
@@ -133,7 +134,7 @@ void xen_destroy_contiguous_region(phys_addr_t pstart, unsigned int order)
 	return;
 }
 
-int __init xen_mm_init(void)
+static int __init xen_mm_init(void)
 {
 	struct gnttab_cache_flush cflush;
 	if (!xen_initial_domain())

arch/x86/include/asm/msr-index.h

@@ -409,6 +409,8 @@
 #define MSR_AMD_PSTATE_DEF_BASE		0xc0010064
 #define MSR_AMD64_OSVW_ID_LENGTH	0xc0010140
 #define MSR_AMD64_OSVW_STATUS		0xc0010141
+#define MSR_AMD_PPIN_CTL		0xc00102f0
+#define MSR_AMD_PPIN			0xc00102f1
 #define MSR_AMD64_LS_CFG		0xc0011020
 #define MSR_AMD64_DC_CFG		0xc0011022
 #define MSR_AMD64_BU_CFG2		0xc001102a

drivers/xen/Kconfig

@@ -106,27 +106,27 @@ config XENFS
 	  If in doubt, say yes.
 
 config XEN_COMPAT_XENFS
-       bool "Create compatibility mount point /proc/xen"
-       depends on XENFS
-       default y
-       help
-         The old xenstore userspace tools expect to find "xenbus"
-         under /proc/xen, but "xenbus" is now found at the root of the
-         xenfs filesystem.  Selecting this causes the kernel to create
-         the compatibility mount point /proc/xen if it is running on
-         a xen platform.
-         If in doubt, say yes.
+	bool "Create compatibility mount point /proc/xen"
+	depends on XENFS
+	default y
+	help
+	  The old xenstore userspace tools expect to find "xenbus"
+	  under /proc/xen, but "xenbus" is now found at the root of the
+	  xenfs filesystem.  Selecting this causes the kernel to create
+	  the compatibility mount point /proc/xen if it is running on
+	  a xen platform.
+	  If in doubt, say yes.
 
 config XEN_SYS_HYPERVISOR
-       bool "Create xen entries under /sys/hypervisor"
-       depends on SYSFS
-       select SYS_HYPERVISOR
-       default y
-       help
-         Create entries under /sys/hypervisor describing the Xen
-	 hypervisor environment.  When running native or in another
-	 virtual environment, /sys/hypervisor will still be present,
-	 but will have no xen contents.
+	bool "Create xen entries under /sys/hypervisor"
+	depends on SYSFS
+	select SYS_HYPERVISOR
+	default y
+	help
+	  Create entries under /sys/hypervisor describing the Xen
+	  hypervisor environment.  When running native or in another
+	  virtual environment, /sys/hypervisor will still be present,
+	  but will have no xen contents.
 
 config XEN_XENBUS_FRONTEND
 	tristate
@@ -141,7 +141,8 @@ config XEN_GNTDEV
 
 config XEN_GNTDEV_DMABUF
 	bool "Add support for dma-buf grant access device driver extension"
-	depends on XEN_GNTDEV && XEN_GRANT_DMA_ALLOC && DMA_SHARED_BUFFER
+	depends on XEN_GNTDEV && XEN_GRANT_DMA_ALLOC
+	select DMA_SHARED_BUFFER
 	help
 	  Allows userspace processes and kernel modules to use Xen backed
 	  dma-buf implementation. With this extension grant references to
@@ -270,7 +271,7 @@ config XEN_ACPI_PROCESSOR
 	depends on XEN && XEN_DOM0 && X86 && ACPI_PROCESSOR && CPU_FREQ
 	default m
 	help
-          This ACPI processor uploads Power Management information to the Xen
+	  This ACPI processor uploads Power Management information to the Xen
 	  hypervisor.
 
 	  To do that the driver parses the Power Management data and uploads
@@ -279,19 +280,19 @@ config XEN_ACPI_PROCESSOR
 	  SMM so that other drivers (such as ACPI cpufreq scaling driver) will
 	  not load.
 
-          To compile this driver as a module, choose M here: the module will be
+	  To compile this driver as a module, choose M here: the module will be
 	  called xen_acpi_processor  If you do not know what to choose, select
 	  M here. If the CPUFREQ drivers are built in, select Y here.
 
 config XEN_MCE_LOG
 	bool "Xen platform mcelog"
-	depends on XEN_DOM0 && X86_64 && X86_MCE
+	depends on XEN_DOM0 && X86_MCE
 	help
 	  Allow kernel fetching MCE error from Xen platform and
 	  converting it into Linux mcelog format for mcelog tools
 
 config XEN_HAVE_PVMMU
-       bool
+	bool
 
 config XEN_EFI
 	def_bool y
@@ -308,15 +309,15 @@ config XEN_ACPI
 	depends on X86 && ACPI
 
 config XEN_SYMS
-       bool "Xen symbols"
-       depends on X86 && XEN_DOM0 && XENFS
-       default y if KALLSYMS
-       help
-          Exports hypervisor symbols (along with their types and addresses) via
-          /proc/xen/xensyms file, similar to /proc/kallsyms
+	bool "Xen symbols"
+	depends on X86 && XEN_DOM0 && XENFS
+	default y if KALLSYMS
+	help
+	  Exports hypervisor symbols (along with their types and addresses) via
+	  /proc/xen/xensyms file, similar to /proc/kallsyms
 
 config XEN_HAVE_VPMU
-       bool
+	bool
 
 config XEN_FRONT_PGDIR_SHBUF
 	tristate

drivers/xen/mcelog.c

@@ -222,7 +222,7 @@ static int convert_log(struct mc_info *mi)
 	struct mcinfo_global *mc_global;
 	struct mcinfo_bank *mc_bank;
 	struct xen_mce m;
-	uint32_t i;
+	unsigned int i, j;
 
 	mic = NULL;
 	x86_mcinfo_lookup(&mic, mi, MC_TYPE_GLOBAL);
@@ -248,7 +248,17 @@ static int convert_log(struct mc_info *mi)
 	m.socketid = g_physinfo[i].mc_chipid;
 	m.cpu = m.extcpu = g_physinfo[i].mc_cpunr;
 	m.cpuvendor = (__u8)g_physinfo[i].mc_vendor;
-	m.mcgcap = g_physinfo[i].mc_msrvalues[__MC_MSR_MCGCAP].value;
+	for (j = 0; j < g_physinfo[i].mc_nmsrvals; ++j)
+		switch (g_physinfo[i].mc_msrvalues[j].reg) {
+		case MSR_IA32_MCG_CAP:
+			m.mcgcap = g_physinfo[i].mc_msrvalues[j].value;
+			break;
+
+		case MSR_PPIN:
+		case MSR_AMD_PPIN:
+			m.ppin = g_physinfo[i].mc_msrvalues[j].value;
+			break;
+		}
 
 	mic = NULL;
 	x86_mcinfo_lookup(&mic, mi, MC_TYPE_BANK);

include/xen/interface/xen-mca.h

@@ -183,7 +183,6 @@ struct mc_info {
 DEFINE_GUEST_HANDLE_STRUCT(mc_info);
 
 #define __MC_MSR_ARRAYSIZE 8
-#define __MC_MSR_MCGCAP 0
 #define __MC_NMSRS 1
 #define MC_NCAPS 7
 struct mcinfo_logical_cpu {
@@ -332,7 +331,11 @@ struct xen_mc {
 };
 DEFINE_GUEST_HANDLE_STRUCT(xen_mc);
 
-/* Fields are zero when not available */
+/*
+ * Fields are zero when not available. Also, this struct is shared with
+ * userspace mcelog and thus must keep existing fields at current offsets.
+ * Only add new fields to the end of the structure
+ */
 struct xen_mce {
 	__u64 status;
 	__u64 misc;
@@ -353,6 +356,9 @@ struct xen_mce {
 	__u32 socketid;	/* CPU socket ID */
 	__u32 apicid;	/* CPU initial apic ID */
 	__u64 mcgcap;	/* MCGCAP MSR: machine check capabilities of CPU */
+	__u64 synd;	/* MCA_SYND MSR: only valid on SMCA systems */
+	__u64 ipid;	/* MCA_IPID MSR: only valid on SMCA systems */
+	__u64 ppin;	/* Protected Processor Inventory Number */
 };
 
 /*