staging: unisys: refactor ultra_segment_state

Rename the struct to spar_segment_state and fix CamelCase names:

Enabled => enabled
Active => active
Alive => alive
Revoked => revoked
Allocated => allocated
Known => known
Ready => ready
Operating => operating

Fix all references to modified names to use the new names.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/unisys/common-spar/include/channels/controlframework.h

@@ -36,31 +36,34 @@
 
 /* Define Ki scale page to be traditional 4KB page */
 #define ULTRA_MEMORY_PAGE_Ki (ULTRA_MEMORY_PAGE_WORD * ULTRA_MEMORY_COUNT_Ki)
-struct ultra_segment_state {
-	u16 Enabled:1;		/* Bit 0: May enter other states */
-	u16 Active:1;		/* Bit 1: Assigned to active partition */
-	u16 Alive:1;		/* Bit 2: Configure message sent to
+struct spar_segment_state  {
+	u16 enabled:1;		/* Bit 0: May enter other states */
+	u16 active:1;		/* Bit 1: Assigned to active partition */
+	u16 alive:1;		/* Bit 2: Configure message sent to
 				 * service/server */
-	u16 Revoked:1;		/* Bit 3: similar to partition state
+	u16 revoked:1;		/* Bit 3: similar to partition state
 				 * ShuttingDown */
-	u16 Allocated:1;	/* Bit 4: memory (device/port number)
+	u16 allocated:1;	/* Bit 4: memory (device/port number)
 				 * has been selected by Command */
-	u16 Known:1;		/* Bit 5: has been introduced to the
+	u16 known:1;		/* Bit 5: has been introduced to the
 				 * service/guest partition */
-	u16 Ready:1;		/* Bit 6: service/Guest partition has
+	u16 ready:1;		/* Bit 6: service/Guest partition has
 				 * responded to introduction */
-	u16 Operating:1;	/* Bit 7: resource is configured and
+	u16 operating:1;	/* Bit 7: resource is configured and
 				 * operating */
 	/* Note: don't use high bit unless we need to switch to ushort
 	 * which is non-compliant */
 };
-static const struct ultra_segment_state SegmentStateRunning = {
+
+static const struct spar_segment_state SegmentStateRunning = {
 	1, 1, 1, 0, 1, 1, 1, 1
 };
-static const struct ultra_segment_state SegmentStatePaused = {
+
+static const struct spar_segment_state SegmentStatePaused = {
 	1, 1, 1, 0, 1, 1, 1, 0
 };
-static const struct ultra_segment_state SegmentStateStandby = {
+
+static const struct spar_segment_state SegmentStateStandby = {
 	1, 1, 0, 0, 1, 1, 1, 0
 };
 

drivers/staging/unisys/common-spar/include/channels/controlvmchannel.h

@@ -389,13 +389,13 @@ typedef struct _CONTROLVM_MESSAGE_PACKET  {
 		} reconfigureDevice;	/* for CONTROLVM_DEVICE_RECONFIGURE */
 		struct  {
 			u32 busNo;
-			struct ultra_segment_state state;
+			struct spar_segment_state state;
 			u8 reserved[2];	/* Natural alignment purposes */
 		} busChangeState;	/* for CONTROLVM_BUS_CHANGESTATE */
 		struct  {
 			u32 busNo;
 			u32 devNo;
-			struct ultra_segment_state state;
+			struct spar_segment_state state;
 			struct  {
 				u32 physicalDevice:1;	/* =1 if message is for
 							 * a physical device */
@@ -406,7 +406,7 @@ typedef struct _CONTROLVM_MESSAGE_PACKET  {
 		struct  {
 			u32 busNo;
 			u32 devNo;
-			struct ultra_segment_state state;
+			struct spar_segment_state state;
 			u8 reserved[6];	/* Natural alignment purposes */
 		} deviceChangeStateEvent; /* for CONTROLVM_DEVICE_CHANGESTATE_EVENT */
 		struct  {

drivers/staging/unisys/visorchipset/visorchipset_main.c

@@ -348,9 +348,8 @@ static void controlvm_respond(CONTROLVM_MESSAGE_HEADER *msgHdr, int response);
 static void controlvm_respond_chipset_init(CONTROLVM_MESSAGE_HEADER *msgHdr,
 					   int response,
 					   ULTRA_CHIPSET_FEATURE features);
-static void controlvm_respond_physdev_changestate(
-			CONTROLVM_MESSAGE_HEADER *msgHdr, int response,
-			struct ultra_segment_state state);
+static void controlvm_respond_physdev_changestate(CONTROLVM_MESSAGE_HEADER *
+		msgHdr, int response, struct spar_segment_state state);
 
 static ssize_t toolaction_show(struct device *dev,
 			       struct device_attribute *attr,
@@ -743,8 +742,7 @@ controlvm_respond_chipset_init(CONTROLVM_MESSAGE_HEADER *msgHdr, int response,
 
 static void
 controlvm_respond_physdev_changestate(CONTROLVM_MESSAGE_HEADER *msgHdr,
-				      int response, struct ultra_segment_state
-				      state)
+		int response, struct spar_segment_state state)
 {
 	CONTROLVM_MESSAGE outmsg;
 
@@ -860,7 +858,7 @@ bus_responder(enum control_vm_id cmdId, ulong busNo, int response)
 static void
 device_changestate_responder(enum control_vm_id cmdId,
 			     ulong busNo, ulong devNo, int response,
-			     struct ultra_segment_state responseState)
+			     struct spar_segment_state responseState)
 {
 	VISORCHIPSET_DEVICE_INFO *p = NULL;
 	CONTROLVM_MESSAGE outmsg;
@@ -994,7 +992,7 @@ bus_epilog(u32 busNo,
 }
 
 static void
-device_epilog(u32 busNo, u32 devNo, struct ultra_segment_state state, u32 cmd,
+device_epilog(u32 busNo, u32 devNo, struct spar_segment_state state, u32 cmd,
 	      CONTROLVM_MESSAGE_HEADER *msgHdr, int response,
 	      BOOL needResponse, BOOL for_visorbus)
 {
@@ -1033,8 +1031,8 @@ device_epilog(u32 busNo, u32 devNo, struct ultra_segment_state state, u32 cmd,
 			break;
 		case CONTROLVM_DEVICE_CHANGESTATE:
 			/* ServerReady / ServerRunning / SegmentStateRunning */
-			if (state.Alive == SegmentStateRunning.Alive &&
-			    state.Operating == SegmentStateRunning.Operating) {
+			if (state.alive == SegmentStateRunning.alive &&
+			    state.operating == SegmentStateRunning.operating) {
 				if (notifiers->device_resume) {
 					(*notifiers->device_resume) (busNo,
 								     devNo);
@@ -1042,9 +1040,9 @@ device_epilog(u32 busNo, u32 devNo, struct ultra_segment_state state, u32 cmd,
 				}
 			}
 			/* ServerNotReady / ServerLost / SegmentStateStandby */
-			else if (state.Alive == SegmentStateStandby.Alive &&
-				 state.Operating ==
-				 SegmentStateStandby.Operating) {
+			else if (state.alive == SegmentStateStandby.alive &&
+				 state.operating ==
+				 SegmentStateStandby.operating) {
 				/* technically this is standby case
 				 * where server is lost
 				 */
@@ -1053,9 +1051,9 @@ device_epilog(u32 busNo, u32 devNo, struct ultra_segment_state state, u32 cmd,
 								    devNo);
 					notified = TRUE;
 				}
-			} else if (state.Alive == SegmentStatePaused.Alive &&
-				   state.Operating ==
-				   SegmentStatePaused.Operating) {
+			} else if (state.alive == SegmentStatePaused.alive &&
+				   state.operating ==
+				   SegmentStatePaused.operating) {
 				/* this is lite pause where channel is
 				 * still valid just 'pause' of it
 				 */
@@ -1306,7 +1304,7 @@ my_device_changestate(CONTROLVM_MESSAGE *inmsg)
 	CONTROLVM_MESSAGE_PACKET *cmd = &inmsg->cmd;
 	ulong busNo = cmd->deviceChangeState.busNo;
 	ulong devNo = cmd->deviceChangeState.devNo;
-	struct ultra_segment_state state = cmd->deviceChangeState.state;
+	struct spar_segment_state state = cmd->deviceChangeState.state;
 	VISORCHIPSET_DEVICE_INFO *pDevInfo = NULL;
 	int rc = CONTROLVM_RESP_SUCCESS;
 
@@ -1631,7 +1629,7 @@ parahotplug_request_kickoff(struct parahotplug_request *req)
 	sprintf(env_cmd, "SPAR_PARAHOTPLUG=1");
 	sprintf(env_id, "SPAR_PARAHOTPLUG_ID=%d", req->id);
 	sprintf(env_state, "SPAR_PARAHOTPLUG_STATE=%d",
-		cmd->deviceChangeState.state.Active);
+		cmd->deviceChangeState.state.active);
 	sprintf(env_bus, "SPAR_PARAHOTPLUG_BUS=%d",
 		cmd->deviceChangeState.busNo);
 	sprintf(env_dev, "SPAR_PARAHOTPLUG_DEVICE=%d",
@@ -1640,7 +1638,7 @@ parahotplug_request_kickoff(struct parahotplug_request *req)
 		cmd->deviceChangeState.devNo & 0x7);
 
 	LOGINF("parahotplug_request_kickoff: state=%d, bdf=%d/%d/%d, id=%u\n",
-	       cmd->deviceChangeState.state.Active,
+	       cmd->deviceChangeState.state.active,
 	       cmd->deviceChangeState.busNo, cmd->deviceChangeState.devNo >> 3,
 	       cmd->deviceChangeState.devNo & 7, req->id);
 
@@ -1700,7 +1698,7 @@ parahotplug_request_complete(int id, u16 active)
 			 */
 			list_del(pos);
 			spin_unlock(&Parahotplug_request_list_lock);
-			req->msg.cmd.deviceChangeState.state.Active = active;
+			req->msg.cmd.deviceChangeState.state.active = active;
 			if (req->msg.hdr.Flags.responseExpected)
 				controlvm_respond_physdev_changestate(
 					&req->msg.hdr, CONTROLVM_RESP_SUCCESS,
@@ -1729,7 +1727,7 @@ parahotplug_process_message(CONTROLVM_MESSAGE *inmsg)
 		return;
 	}
 
-	if (inmsg->cmd.deviceChangeState.state.Active) {
+	if (inmsg->cmd.deviceChangeState.state.active) {
 		/* For enable messages, just respond with success
 		* right away.  This is a bit of a hack, but there are
 		* issues with the early enable messages we get (with
@@ -1853,13 +1851,13 @@ handle_command(CONTROLVM_MESSAGE inmsg, HOSTADDRESS channel_addr)
 			LOGINF("DEVICE_CHANGESTATE for physical device (%lu,%lu, active=%lu)",
 			     (ulong) cmd->deviceChangeState.busNo,
 			     (ulong) cmd->deviceChangeState.devNo,
-			     (ulong) cmd->deviceChangeState.state.Active);
+			     (ulong) cmd->deviceChangeState.state.active);
 			parahotplug_process_message(&inmsg);
 		} else {
 			LOGINF("DEVICE_CHANGESTATE for virtual device (%lu,%lu, state.Alive=0x%lx)",
 			     (ulong) cmd->deviceChangeState.busNo,
 			     (ulong) cmd->deviceChangeState.devNo,
-			     (ulong) cmd->deviceChangeState.state.Alive);
+			     (ulong) cmd->deviceChangeState.state.alive);
 			/* save the hdr and cmd structures for later use */
 			/* when sending back the response to Command */
 			my_device_changestate(&inmsg);