Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull 64-bit ARM SoC updates from Olof Johansson:
 "Changes to platform code for 64-bit ARM platforms.

  Nearly all of these are defconfig updates to enable new drivers or old
  drivers still used on these 64-bit platforms.

  Added platforms for this release are:

   - Broadcom BCM2837
   - Renesas R8A7796"

* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
  arm64: remove duplicate PWM entry in defconfig
  arm64: Update default configuration
  arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433
  arm64: amlogic: select gxbb clk driver
  arm64: defconfig: Enable S2MPS11 clock and S3C RTC driver
  arm64: marvell: enable Armada 3700 clock drivers
  arm64: defconfig: enable msm8996 pinctrl support
  arm64: defconfig: Enable qcom msm8996 clk drivers
  arm: defconfig: Enable PM8941 pwr key
  arm64: defconfig: enable stmmac and realtek PHY as modules
  arm64: Kconfig: select PM{,_GENERIC_DOMAINS} for ARCH_VEXPRESS
  arm64: defconfig: enable SENSORS_ARM_SCPI
  arm64: defconfig: enable Generic on-chip SRAM driver
  arm64: configs: enable PCIe driver for Armada 7K/8K
  arm64: Add platform selection for BCM2835.
  arm64: defconfig: disable plain NEON implementation of AES
  arm64: Allow for different DMA and CPU bus offsets
  arm64: defconfig: enable Renesas R8A7796 SoC
  arm64: defconfig: Enable Cadence MACB/GEM support
  ARM64: Kconfig: Select the Amlogic Meson pin controller driver
  ...

arch/arm64/Kconfig.platforms

@@ -13,6 +13,19 @@ config ARCH_ALPINE
 	  This enables support for the Annapurna Labs Alpine
 	  Soc family.
 
+config ARCH_BCM2835
+	bool "Broadcom BCM2835 family"
+	select ARCH_REQUIRE_GPIOLIB
+	select CLKSRC_OF
+	select PINCTRL
+	select PINCTRL_BCM2835
+	select ARM_AMBA
+	select ARM_TIMER_SP804
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  This enables support for the Broadcom BCM2837 SoC.
+	  This SoC is used in the Raspberry Pi 3 device.
+
 config ARCH_BCM_IPROC
 	bool "Broadcom iProc SoC Family"
 	select COMMON_CLK_IPROC
@@ -36,6 +49,7 @@ config ARCH_EXYNOS
 	select HAVE_S3C_RTC if RTC_CLASS
 	select PINCTRL
 	select PINCTRL_EXYNOS
+	select SOC_SAMSUNG
 	help
 	  This enables support for ARMv8 based Samsung Exynos SoC family.
 
@@ -66,6 +80,10 @@ config ARCH_MEDIATEK
 
 config ARCH_MESON
 	bool "Amlogic Platforms"
+	select PINCTRL
+	select PINCTRL_MESON
+	select COMMON_CLK_AMLOGIC
+	select COMMON_CLK_GXBB
 	help
 	  This enables support for the Amlogic S905 SoCs.
 
@@ -73,6 +91,7 @@ config ARCH_MVEBU
 	bool "Marvell EBU SoC Family"
 	select ARMADA_AP806_SYSCON
 	select ARMADA_CP110_SYSCON
+	select ARMADA_37XX_CLK
 	select MVEBU_ODMI
 	help
 	  This enables support for Marvell EBU familly, including:
@@ -160,6 +179,8 @@ config ARCH_VEXPRESS
 	bool "ARMv8 software model (Versatile Express)"
 	select ARCH_REQUIRE_GPIOLIB
 	select COMMON_CLK_VERSATILE
+	select PM
+	select PM_GENERIC_DOMAINS
 	select POWER_RESET_VEXPRESS
 	select VEXPRESS_CONFIG
 	help
@@ -168,6 +189,7 @@ config ARCH_VEXPRESS
 
 config ARCH_VULCAN
 	bool "Broadcom Vulcan SOC Family"
+	select GPIOLIB
 	help
 	  This enables support for Broadcom Vulcan SoC Family
 

arch/arm64/configs/defconfig

@@ -45,6 +45,7 @@ CONFIG_ARCH_ROCKCHIP=y
 CONFIG_ARCH_SEATTLE=y
 CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_R8A7795=y
+CONFIG_ARCH_R8A7796=y
 CONFIG_ARCH_STRATIX10=y
 CONFIG_ARCH_TEGRA=y
 CONFIG_ARCH_SPRD=y
@@ -63,6 +64,7 @@ CONFIG_PCI_XGENE=y
 CONFIG_PCI_LAYERSCAPE=y
 CONFIG_PCI_HISI=y
 CONFIG_PCIE_QCOM=y
+CONFIG_PCIE_ARMADA_8K=y
 CONFIG_ARM64_VA_BITS_48=y
 CONFIG_SCHED_MC=y
 CONFIG_PREEMPT=y
@@ -102,6 +104,7 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_VIRTIO_BLK=y
+CONFIG_SRAM=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
@@ -121,6 +124,7 @@ CONFIG_TUN=y
 CONFIG_VIRTIO_NET=y
 CONFIG_AMD_XGBE=y
 CONFIG_NET_XGENE=y
+CONFIG_MACB=y
 CONFIG_E1000E=y
 CONFIG_IGB=y
 CONFIG_IGBVF=y
@@ -128,6 +132,8 @@ CONFIG_SKY2=y
 CONFIG_RAVB=y
 CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
+CONFIG_STMMAC_ETH=m
+CONFIG_REALTEK_PHY=m
 CONFIG_MICREL_PHY=y
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
@@ -143,6 +149,8 @@ CONFIG_WL18XX=m
 CONFIG_WLCORE_SDIO=m
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PM8941_PWRKEY=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
 CONFIG_LEGACY_PTY_COUNT=16
@@ -179,41 +187,62 @@ CONFIG_I2C_QUP=y
 CONFIG_I2C_TEGRA=y
 CONFIG_I2C_UNIPHIER_F=y
 CONFIG_I2C_RCAR=y
+CONFIG_I2C_CROS_EC_TUNNEL=y
 CONFIG_SPI=y
 CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_QUP=y
 CONFIG_SPI_SPIDEV=m
+CONFIG_SPI_S3C64XX=y
 CONFIG_SPMI=y
 CONFIG_PINCTRL_SINGLE=y
+CONFIG_PINCTRL_MAX77620=y
 CONFIG_PINCTRL_MSM8916=y
+CONFIG_PINCTRL_MSM8996=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_PL061=y
 CONFIG_GPIO_RCAR=y
 CONFIG_GPIO_XGENE=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_GPIO_MAX77620=y
 CONFIG_POWER_RESET_MSM=y
+CONFIG_BATTERY_BQ27XXX=y
 CONFIG_POWER_RESET_XGENE=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_INA2XX=m
+CONFIG_SENSORS_ARM_SCPI=y
 CONFIG_THERMAL=y
 CONFIG_THERMAL_EMULATION=y
 CONFIG_EXYNOS_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_RENESAS_WDT=y
+CONFIG_S3C2410_WATCHDOG=y
+CONFIG_MFD_MAX77620=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_SEC_CORE=y
 CONFIG_MFD_HI655X_PMIC=y
 CONFIG_REGULATOR=y
+CONFIG_MFD_CROS_EC=y
+CONFIG_MFD_CROS_EC_I2C=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_HI655X=y
+CONFIG_REGULATOR_MAX77620=y
+CONFIG_REGULATOR_PWM=y
 CONFIG_REGULATOR_QCOM_SMD_RPM=y
 CONFIG_REGULATOR_QCOM_SPMI=y
 CONFIG_REGULATOR_S2MPS11=y
+CONFIG_DRM=m
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_TEGRA=m
+CONFIG_DRM_PANEL_SIMPLE=m
 CONFIG_FB=y
 CONFIG_FB_ARMCLCD=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_LP855X=m
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
@@ -222,18 +251,23 @@ CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
 CONFIG_SND_SOC_RCAR=y
+CONFIG_SND_SOC_SAMSUNG=y
 CONFIG_SND_SOC_AK4613=y
 CONFIG_USB=y
 CONFIG_USB_OTG=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_RCAR=y
+CONFIG_USB_EHCI_EXYNOS=y
+CONFIG_USB_XHCI_TEGRA=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MSM=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_EXYNOS=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_DWC2=y
+CONFIG_USB_DWC3=y
 CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
@@ -263,12 +297,15 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_MAX77686=y
 CONFIG_RTC_DRV_S5M=y
 CONFIG_RTC_DRV_DS3232=y
 CONFIG_RTC_DRV_EFI=y
 CONFIG_RTC_DRV_PL031=y
 CONFIG_RTC_DRV_SUN6I=y
+CONFIG_RTC_DRV_TEGRA=y
 CONFIG_RTC_DRV_XGENE=y
+CONFIG_RTC_DRV_S3C=y
 CONFIG_DMADEVICES=y
 CONFIG_PL330_DMA=y
 CONFIG_TEGRA20_APB_DMA=y
@@ -283,9 +320,11 @@ CONFIG_XEN_GNTDEV=y
 CONFIG_XEN_GRANT_DEV_ALLOC=y
 CONFIG_COMMON_CLK_SCPI=y
 CONFIG_COMMON_CLK_CS2000_CP=y
+CONFIG_COMMON_CLK_S2MPS11=y
 CONFIG_CLK_QORIQ=y
 CONFIG_COMMON_CLK_QCOM=y
 CONFIG_MSM_GCC_8916=y
+CONFIG_MSM_MMCC_8996=y
 CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_MAILBOX=y
 CONFIG_ARM_MHU=y
@@ -297,12 +336,18 @@ CONFIG_QCOM_SMD_RPM=y
 CONFIG_ARCH_TEGRA_132_SOC=y
 CONFIG_ARCH_TEGRA_210_SOC=y
 CONFIG_EXTCON_USB_GPIO=y
+CONFIG_PWM=y
+CONFIG_PWM_TEGRA=m
 CONFIG_COMMON_RESET_HI6220=y
 CONFIG_PHY_RCAR_GEN3_USB2=y
 CONFIG_PHY_HI6220_USB=y
 CONFIG_PHY_XGENE=y
+CONFIG_PHY_TEGRA_XUSB=y
 CONFIG_ARM_SCPI_PROTOCOL=y
 CONFIG_ACPI=y
+CONFIG_IIO=y
+CONFIG_EXYNOS_ADC=y
+CONFIG_PWM_SAMSUNG=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_FANOTIFY=y
@@ -319,6 +364,8 @@ CONFIG_EFIVAR_FS=y
 CONFIG_SQUASHFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
 CONFIG_ROOT_NFS=y
 CONFIG_9P_FS=y
 CONFIG_NLS_CODEPAGE_437=y
@@ -344,5 +391,5 @@ CONFIG_CRYPTO_SHA2_ARM64_CE=y
 CONFIG_CRYPTO_GHASH_ARM64_CE=y
 CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
 CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_CRYPTO_AES_ARM64_NEON_BLK=y
+# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set
 CONFIG_CRYPTO_CRC32_ARM64=y

arch/arm64/include/asm/dma-mapping.h

@@ -66,12 +66,16 @@ static inline bool is_device_dma_coherent(struct device *dev)
 
 static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
-	return (dma_addr_t)paddr;
+	dma_addr_t dev_addr = (dma_addr_t)paddr;
+
+	return dev_addr - ((dma_addr_t)dev->dma_pfn_offset << PAGE_SHIFT);
 }
 
 static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dev_addr)
 {
-	return (phys_addr_t)dev_addr;
+	phys_addr_t paddr = (phys_addr_t)dev_addr;
+
+	return paddr + ((phys_addr_t)dev->dma_pfn_offset << PAGE_SHIFT);
 }
 
 static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
@@ -86,5 +90,14 @@ static inline void dma_mark_clean(void *addr, size_t size)
 {
 }
 
+/* Override for dma_max_pfn() */
+static inline unsigned long dma_max_pfn(struct device *dev)
+{
+	dma_addr_t dma_max = (dma_addr_t)*dev->dma_mask;
+
+	return (ulong)dma_to_phys(dev, dma_max) >> PAGE_SHIFT;
+}
+#define dma_max_pfn(dev) dma_max_pfn(dev)
+
 #endif	/* __KERNEL__ */
 #endif	/* __ASM_DMA_MAPPING_H */