Commit 3ff1c259 authored by Cyril Chemparathy's avatar Cyril Chemparathy Committed by David S. Miller

phy/marvell: add 88ec048 support

Marvell 88ec048 is a derivative of its 88e1121r device.  From the programmer's
perspective, the one major difference is the addition of an additional control
bit in Page 2 Register 16 - used to control the padding of odd nibble
preambles.

This patch adds support for this new device, while inheriting as much code as
possible from the existing 88e1121r implementation.
Signed-off-by: default avatarCyril Chemparathy <cyril@ti.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 99870a73
......@@ -75,6 +75,9 @@
#define MII_88E1121_PHY_MSCR_TX_DELAY BIT(4)
#define MII_88E1121_PHY_MSCR_DELAY_MASK (~(0x3 << 4))
#define MII_88EC048_PHY_MSCR1_REG 16
#define MII_88EC048_PHY_MSCR1_PAD_ODD BIT(6)
#define MII_88E1121_PHY_LED_CTRL 16
#define MII_88E1121_PHY_LED_PAGE 3
#define MII_88E1121_PHY_LED_DEF 0x0030
......@@ -231,6 +234,31 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
return err;
}
static int m88ec048_config_aneg(struct phy_device *phydev)
{
int err, oldpage, mscr;
oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
err = phy_write(phydev, MII_88E1121_PHY_PAGE,
MII_88E1121_PHY_MSCR_PAGE);
if (err < 0)
return err;
mscr = phy_read(phydev, MII_88EC048_PHY_MSCR1_REG);
mscr |= MII_88EC048_PHY_MSCR1_PAD_ODD;
err = phy_write(phydev, MII_88E1121_PHY_MSCR_REG, mscr);
if (err < 0)
return err;
err = phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
if (err < 0)
return err;
return m88e1121_config_aneg(phydev);
}
static int m88e1111_config_init(struct phy_device *phydev)
{
int err;
......@@ -621,6 +649,19 @@ static struct phy_driver marvell_drivers[] = {
.did_interrupt = &m88e1121_did_interrupt,
.driver = { .owner = THIS_MODULE },
},
{
.phy_id = 0x01410e90,
.phy_id_mask = 0xfffffff0,
.name = "Marvell 88EC048",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_aneg = &m88ec048_config_aneg,
.read_status = &marvell_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
.did_interrupt = &m88e1121_did_interrupt,
.driver = { .owner = THIS_MODULE },
},
{
.phy_id = 0x01410cd0,
.phy_id_mask = 0xfffffff0,
......@@ -686,6 +727,7 @@ static struct mdio_device_id marvell_tbl[] = {
{ 0x01410cb0, 0xfffffff0 },
{ 0x01410cd0, 0xfffffff0 },
{ 0x01410e30, 0xfffffff0 },
{ 0x01410e90, 0xfffffff0 },
{ }
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment