Commit 4000e7a7 authored by Rajesh Borundia's avatar Rajesh Borundia Committed by David S. Miller

qlcnic: Support MAC address, Tx rate config.

o Add support for MAC address and Tx rate configuration
  per VF via iproute2 tool.
o Tx rate change is allowed while the guest is running
  and the VF driver is loaded.
o MAC address change is allowed only when VF driver
  is not loaded.
Signed-off-by: default avatarManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: default avatarSucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: default avatarRajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent f036e4f4
......@@ -341,6 +341,11 @@ static const struct net_device_ops qlcnic_netdev_ops = {
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = qlcnic_poll_controller,
#endif
#ifdef CONFIG_QLCNIC_SRIOV
.ndo_set_vf_mac = qlcnic_sriov_set_vf_mac,
.ndo_set_vf_tx_rate = qlcnic_sriov_set_vf_tx_rate,
.ndo_get_vf_config = qlcnic_sriov_get_vf_config,
#endif
};
static const struct net_device_ops qlcnic_netdev_failed_ops = {
......
......@@ -116,6 +116,8 @@ struct qlcnic_resources {
struct qlcnic_vport {
u16 handle;
u16 max_tx_bw;
u16 min_tx_bw;
u8 mac[6];
};
......@@ -173,6 +175,8 @@ void qlcnic_sriov_cleanup_async_list(struct qlcnic_back_channel *);
void qlcnic_sriov_cleanup_list(struct qlcnic_trans_list *);
int __qlcnic_sriov_add_act_list(struct qlcnic_sriov *, struct qlcnic_vf_info *,
struct qlcnic_bc_trans *);
int qlcnic_sriov_get_vf_vport_info(struct qlcnic_adapter *,
struct qlcnic_info *, u16);
static inline bool qlcnic_sriov_enable_check(struct qlcnic_adapter *adapter)
{
......@@ -199,6 +203,10 @@ bool qlcnic_sriov_soft_flr_check(struct qlcnic_adapter *,
struct qlcnic_vf_info *);
void qlcnic_sriov_pf_reset(struct qlcnic_adapter *);
int qlcnic_sriov_pf_reinit(struct qlcnic_adapter *);
int qlcnic_sriov_set_vf_mac(struct net_device *, int, u8 *);
int qlcnic_sriov_set_vf_tx_rate(struct net_device *, int, int);
int qlcnic_sriov_get_vf_config(struct net_device *, int ,
struct ifla_vf_info *);
#else
static inline void qlcnic_sriov_pf_disable(struct qlcnic_adapter *adapter) {}
static inline void qlcnic_sriov_pf_cleanup(struct qlcnic_adapter *adapter) {}
......
......@@ -181,6 +181,7 @@ int qlcnic_sriov_init(struct qlcnic_adapter *adapter, int num_vfs)
goto qlcnic_destroy_async_wq;
}
sriov->vf_info[i].vp = vp;
vp->max_tx_bw = MAX_BW;
random_ether_addr(vp->mac);
dev_info(&adapter->pdev->dev,
"MAC Address %pM is configured for VF %d\n",
......@@ -378,12 +379,83 @@ static void qlcnic_sriov_vf_cfg_buff_desc(struct qlcnic_adapter *adapter)
adapter->max_rds_rings = MAX_RDS_RINGS;
}
int qlcnic_sriov_get_vf_vport_info(struct qlcnic_adapter *adapter,
struct qlcnic_info *npar_info, u16 vport_id)
{
struct device *dev = &adapter->pdev->dev;
struct qlcnic_cmd_args cmd;
int err;
u32 status;
err = qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_GET_NIC_INFO);
if (err)
return err;
cmd.req.arg[1] = vport_id << 16 | 0x1;
err = qlcnic_issue_cmd(adapter, &cmd);
if (err) {
dev_err(&adapter->pdev->dev,
"Failed to get vport info, err=%d\n", err);
qlcnic_free_mbx_args(&cmd);
return err;
}
status = cmd.rsp.arg[2] & 0xffff;
if (status & BIT_0)
npar_info->min_tx_bw = MSW(cmd.rsp.arg[2]);
if (status & BIT_1)
npar_info->max_tx_bw = LSW(cmd.rsp.arg[3]);
if (status & BIT_2)
npar_info->max_tx_ques = MSW(cmd.rsp.arg[3]);
if (status & BIT_3)
npar_info->max_tx_mac_filters = LSW(cmd.rsp.arg[4]);
if (status & BIT_4)
npar_info->max_rx_mcast_mac_filters = MSW(cmd.rsp.arg[4]);
if (status & BIT_5)
npar_info->max_rx_ucast_mac_filters = LSW(cmd.rsp.arg[5]);
if (status & BIT_6)
npar_info->max_rx_ip_addr = MSW(cmd.rsp.arg[5]);
if (status & BIT_7)
npar_info->max_rx_lro_flow = LSW(cmd.rsp.arg[6]);
if (status & BIT_8)
npar_info->max_rx_status_rings = MSW(cmd.rsp.arg[6]);
if (status & BIT_9)
npar_info->max_rx_buf_rings = LSW(cmd.rsp.arg[7]);
npar_info->max_rx_ques = MSW(cmd.rsp.arg[7]);
npar_info->max_tx_vlan_keys = LSW(cmd.rsp.arg[8]);
npar_info->max_local_ipv6_addrs = MSW(cmd.rsp.arg[8]);
npar_info->max_remote_ipv6_addrs = LSW(cmd.rsp.arg[9]);
dev_info(dev, "\n\tmin_tx_bw: %d, max_tx_bw: %d max_tx_ques: %d,\n"
"\tmax_tx_mac_filters: %d max_rx_mcast_mac_filters: %d,\n"
"\tmax_rx_ucast_mac_filters: 0x%x, max_rx_ip_addr: %d,\n"
"\tmax_rx_lro_flow: %d max_rx_status_rings: %d,\n"
"\tmax_rx_buf_rings: %d, max_rx_ques: %d, max_tx_vlan_keys %d\n"
"\tlocal_ipv6_addr: %d, remote_ipv6_addr: %d\n",
npar_info->min_tx_bw, npar_info->max_tx_bw,
npar_info->max_tx_ques, npar_info->max_tx_mac_filters,
npar_info->max_rx_mcast_mac_filters,
npar_info->max_rx_ucast_mac_filters, npar_info->max_rx_ip_addr,
npar_info->max_rx_lro_flow, npar_info->max_rx_status_rings,
npar_info->max_rx_buf_rings, npar_info->max_rx_ques,
npar_info->max_tx_vlan_keys, npar_info->max_local_ipv6_addrs,
npar_info->max_remote_ipv6_addrs);
qlcnic_free_mbx_args(&cmd);
return err;
}
static int qlcnic_sriov_vf_init_driver(struct qlcnic_adapter *adapter)
{
struct qlcnic_info nic_info;
struct qlcnic_hardware_context *ahw = adapter->ahw;
int err;
err = qlcnic_sriov_get_vf_vport_info(adapter, &nic_info, 0);
if (err)
return err;
err = qlcnic_get_nic_info(adapter, &nic_info, ahw->pci_func);
if (err)
return -EIO;
......
......@@ -10,6 +10,8 @@
#include <linux/types.h>
#define QLCNIC_SRIOV_VF_MAX_MAC 1
#define QLC_VF_MIN_TX_RATE 100
#define QLC_VF_MAX_TX_RATE 9999
static int qlcnic_sriov_pf_get_vport_handle(struct qlcnic_adapter *, u8);
......@@ -62,8 +64,9 @@ static int qlcnic_sriov_pf_cal_res_limit(struct qlcnic_adapter *adapter,
{
struct qlcnic_sriov *sriov = adapter->ahw->sriov;
struct qlcnic_resources *res = &sriov->ff_max;
int ret = -EIO, vpid;
u32 temp, num_vf_macs, num_vfs, max;
int ret = -EIO, vpid, id;
struct qlcnic_vport *vp;
vpid = qlcnic_sriov_pf_get_vport_handle(adapter, func);
if (vpid < 0)
......@@ -72,8 +75,6 @@ static int qlcnic_sriov_pf_cal_res_limit(struct qlcnic_adapter *adapter,
num_vfs = sriov->num_vfs;
max = num_vfs + 1;
info->bit_offsets = 0xffff;
info->min_tx_bw = 0;
info->max_tx_bw = MAX_BW;
info->max_tx_ques = res->num_tx_queues / max;
info->max_rx_mcast_mac_filters = res->num_rx_mcast_mac_filters;
num_vf_macs = QLCNIC_SRIOV_VF_MAX_MAC;
......@@ -83,7 +84,15 @@ static int qlcnic_sriov_pf_cal_res_limit(struct qlcnic_adapter *adapter,
info->max_rx_ucast_mac_filters = temp;
temp = res->num_tx_mac_filters - (num_vfs * num_vf_macs);
info->max_tx_mac_filters = temp;
info->min_tx_bw = 0;
info->max_tx_bw = MAX_BW;
} else {
id = qlcnic_sriov_func_to_index(adapter, func);
if (id < 0)
return id;
vp = sriov->vf_info[id].vp;
info->min_tx_bw = vp->min_tx_bw;
info->max_tx_bw = vp->max_tx_bw;
info->max_rx_ucast_mac_filters = num_vf_macs;
info->max_tx_mac_filters = num_vf_macs;
}
......@@ -1416,3 +1425,119 @@ int qlcnic_sriov_pf_reinit(struct qlcnic_adapter *adapter)
__func__, ahw->op_mode);
return err;
}
int qlcnic_sriov_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
{
struct qlcnic_adapter *adapter = netdev_priv(netdev);
struct qlcnic_sriov *sriov = adapter->ahw->sriov;
int i, num_vfs = sriov->num_vfs;
struct qlcnic_vf_info *vf_info;
u8 *curr_mac;
if (!qlcnic_sriov_pf_check(adapter))
return -EOPNOTSUPP;
if (!is_valid_ether_addr(mac) || vf >= num_vfs)
return -EINVAL;
if (!compare_ether_addr(adapter->mac_addr, mac)) {
netdev_err(netdev, "MAC address is already in use by the PF\n");
return -EINVAL;
}
for (i = 0; i < num_vfs; i++) {
vf_info = &sriov->vf_info[i];
if (!compare_ether_addr(vf_info->vp->mac, mac)) {
netdev_err(netdev,
"MAC address is already in use by VF %d\n",
i);
return -EINVAL;
}
}
vf_info = &sriov->vf_info[vf];
curr_mac = vf_info->vp->mac;
if (test_bit(QLC_BC_VF_STATE, &vf_info->state)) {
netdev_err(netdev,
"MAC address change failed for VF %d, as VF driver is loaded. Please unload VF driver and retry the operation\n",
vf);
return -EOPNOTSUPP;
}
memcpy(curr_mac, mac, netdev->addr_len);
netdev_info(netdev, "MAC Address %pM is configured for VF %d\n",
mac, vf);
return 0;
}
int qlcnic_sriov_set_vf_tx_rate(struct net_device *netdev, int vf, int tx_rate)
{
struct qlcnic_adapter *adapter = netdev_priv(netdev);
struct qlcnic_sriov *sriov = adapter->ahw->sriov;
struct qlcnic_vf_info *vf_info;
struct qlcnic_info nic_info;
struct qlcnic_vport *vp;
u16 vpid;
if (!qlcnic_sriov_pf_check(adapter))
return -EOPNOTSUPP;
if (vf >= sriov->num_vfs)
return -EINVAL;
if (tx_rate >= 10000 || tx_rate < 100) {
netdev_err(netdev,
"Invalid Tx rate, allowed range is [%d - %d]",
QLC_VF_MIN_TX_RATE, QLC_VF_MAX_TX_RATE);
return -EINVAL;
}
if (tx_rate == 0)
tx_rate = 10000;
vf_info = &sriov->vf_info[vf];
vp = vf_info->vp;
vpid = vp->handle;
if (test_bit(QLC_BC_VF_STATE, &vf_info->state)) {
if (qlcnic_sriov_get_vf_vport_info(adapter, &nic_info, vpid))
return -EIO;
nic_info.max_tx_bw = tx_rate / 100;
nic_info.bit_offsets = BIT_0;
if (qlcnic_sriov_pf_set_vport_info(adapter, &nic_info, vpid))
return -EIO;
}
vp->max_tx_bw = tx_rate / 100;
netdev_info(netdev,
"Setting Tx rate %d (Mbps), %d %% of PF bandwidth, for VF %d\n",
tx_rate, vp->max_tx_bw, vf);
return 0;
}
int qlcnic_sriov_get_vf_config(struct net_device *netdev,
int vf, struct ifla_vf_info *ivi)
{
struct qlcnic_adapter *adapter = netdev_priv(netdev);
struct qlcnic_sriov *sriov = adapter->ahw->sriov;
struct qlcnic_vport *vp;
if (!qlcnic_sriov_pf_check(adapter))
return -EOPNOTSUPP;
if (vf >= sriov->num_vfs)
return -EINVAL;
vp = sriov->vf_info[vf].vp;
memcpy(&ivi->mac, vp->mac, ETH_ALEN);
if (vp->max_tx_bw == MAX_BW)
ivi->tx_rate = 0;
else
ivi->tx_rate = vp->max_tx_bw * 100;
ivi->vf = vf;
return 0;
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment