Merge remote-tracking branch 'kumar/merge' into merge

arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi

@@ -236,6 +236,10 @@ usb@2b000 {
 	};
 
 /include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
+	};
+
 /include/ "pq3-sec3.0-0.dtsi"
 /include/ "pq3-mpic.dtsi"
 /include/ "pq3-mpic-timer-B.dtsi"

arch/powerpc/boot/dts/fsl/p1010si-post.dtsi

@@ -158,7 +158,8 @@ L2: l2-cache-controller@20000 {
 /include/ "pq3-usb2-dr-0.dtsi"
 /include/ "pq3-esdhc-0.dtsi"
 	sdhc@2e000 {
-		fsl,sdhci-auto-cmd12;
+		compatible = "fsl,p1010-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
 	};
 
 /include/ "pq3-sec4.4-0.dtsi"

arch/powerpc/boot/dts/fsl/p1020si-post.dtsi

@@ -145,6 +145,10 @@ L2: l2-cache-controller@20000 {
 /include/ "pq3-usb2-dr-1.dtsi"
 
 /include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,p1020-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
+	};
 /include/ "pq3-sec3.3-0.dtsi"
 
 /include/ "pq3-mpic.dtsi"

arch/powerpc/boot/dts/fsl/p1022si-post.dtsi

@@ -203,7 +203,8 @@ L2: l2-cache-controller@20000 {
 
 /include/ "pq3-esdhc-0.dtsi"
 	sdhc@2e000 {
-		fsl,sdhci-auto-cmd12;
+		compatible = "fsl,p1022-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
 	};
 
 /include/ "pq3-sec3.3-0.dtsi"

arch/powerpc/boot/dts/fsl/p2020si-post.dtsi

@@ -182,6 +182,10 @@ ptp_clock@24e00 {
 /include/ "pq3-etsec1-1.dtsi"
 /include/ "pq3-etsec1-2.dtsi"
 /include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+	};
+
 /include/ "pq3-sec3.1-0.dtsi"
 /include/ "pq3-mpic.dtsi"
 /include/ "pq3-mpic-timer-B.dtsi"

arch/powerpc/boot/dts/p1020rdb.dtsi

 /*
  * P1020 RDB Device Tree Source stub (no addresses or top-level ranges)
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -190,17 +190,16 @@ partition@jffs-fs {
 
 	usb@22000 {
 		phy_type = "ulpi";
+		dr_mode = "host";
 	};
 
-	/* USB2 is shared with localbus, so it must be disabled
-	   by default. We can't put 'status = "disabled";' here
-	   since U-Boot doesn't clear the status property when
-	   it enables USB2. OTOH, U-Boot does create a new node
-	   when there isn't any. So, just comment it out.
+	/* USB2 is shared with localbus. It is used
+	   only in case of SPI and SD boot after
+	   appropriate device-tree fixup done by uboot */
 	usb@23000 {
 		phy_type = "ulpi";
+		dr_mode = "host";
 	};
-	*/
 
 	mdio@24000 {
 		phy0: ethernet-phy@0 {

arch/powerpc/boot/dts/p1021mds.dts

 /*
  * P1021 MDS Device Tree Source
  *
- * Copyright 2010 Freescale Semiconductor Inc.
+ * Copyright 2010,2012 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -151,6 +151,7 @@ partition@fs {
 
 		usb@22000 {
 			phy_type = "ulpi";
+			dr_mode = "host";
 		};
 
 		mdio@24000 {

arch/powerpc/boot/dts/p2020ds.dtsi

 /*
  * P2020DS Device Tree Source stub (no addresses or top-level ranges)
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -134,6 +134,7 @@ nand@6,0 {
 &board_soc {
 	usb@22000 {
 		phy_type = "ulpi";
+		dr_mode = "host";
 	};
 
 	mdio@24520 {

arch/powerpc/boot/dts/p2020rdb.dts

 /*
  * P2020 RDB Device Tree Source
  *
- * Copyright 2009-2011 Freescale Semiconductor Inc.
+ * Copyright 2009-2012 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -197,6 +197,7 @@ partition@900000 {
 
 		usb@22000 {
 			phy_type = "ulpi";
+			dr_mode = "host";
 		};
 
 		mdio@24520 {

arch/powerpc/platforms/85xx/p1022_ds.c

@@ -25,6 +25,7 @@
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
+#include <asm/udbg.h>
 #include <asm/fsl_guts.h>
 #include "smp.h"
 

arch/powerpc/sysdev/fsl_pci.c

@@ -205,12 +205,12 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 
 	if (paddr_hi == paddr_lo) {
 		pr_err("%s: No outbound window space\n", name);
-		return ;
+		goto out;
 	}
 
 	if (paddr_lo == 0) {
 		pr_err("%s: No space for inbound window\n", name);
-		return ;
+		goto out;
 	}
 
 	/* setup PCSRBAR/PEXCSRBAR */
@@ -357,6 +357,7 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 			(u64)hose->dma_window_size);
 	}
 
+out:
 	iounmap(pci);
 }