Commit 4091fb95 authored by Masahiro Yamada's avatar Masahiro Yamada Committed by Linus Torvalds

scripts/spelling.txt: add "followings" pattern and fix typo instances

Fix typos and add the following to the scripts/spelling.txt:

  followings||following

While we are here, add a missing colon in the boilerplate in DT binding
documents.  The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as
well.

I reworded "as the followings:" to "as follows:" for
drivers/usb/gadget/udc/renesas_usb3.c.

Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.comSigned-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 608595ed
...@@ -1020,7 +1020,7 @@ and other resources, etc. ...@@ -1020,7 +1020,7 @@ and other resources, etc.
</itemizedlist> </itemizedlist>
<para> <para>
Of errors detected as above, the followings are not ATA/ATAPI Of errors detected as above, the following are not ATA/ATAPI
device errors but ATA bus errors and should be handled device errors but ATA bus errors and should be handled
according to <xref linkend="excatATAbusErr"/>. according to <xref linkend="excatATAbusErr"/>.
</para> </para>
......
...@@ -152,7 +152,7 @@ tracing facility. ...@@ -152,7 +152,7 @@ tracing facility.
Users can enable/disable this debug tracing feature by executing Users can enable/disable this debug tracing feature by executing
the following command: the following command:
# echo string > /sys/module/acpi/parameters/trace_state # echo string > /sys/module/acpi/parameters/trace_state
Where "string" should be one of the followings: Where "string" should be one of the following:
"disable" "disable"
Disable the method tracing feature. Disable the method tracing feature.
"enable" "enable"
......
...@@ -17,7 +17,7 @@ driver and currently works well under standard IDE subsystem. Actually it's ...@@ -17,7 +17,7 @@ driver and currently works well under standard IDE subsystem. Actually it's
one chip SSD. IO mode is ATA-like custom mode for the host that doesn't have one chip SSD. IO mode is ATA-like custom mode for the host that doesn't have
IDE interface. IDE interface.
Followings are brief descriptions about IO mode. Following are brief descriptions about IO mode.
A. IO mode based on ATA protocol and uses some custom command. (read confirm, A. IO mode based on ATA protocol and uses some custom command. (read confirm,
write confirm) write confirm)
B. IO mode uses SRAM bus interface. B. IO mode uses SRAM bus interface.
......
* Marvell Armada 370 / Armada XP / Armada 3700 Ethernet Controller (NETA) * Marvell Armada 370 / Armada XP / Armada 3700 Ethernet Controller (NETA)
Required properties: Required properties:
- compatible: could be one of the followings - compatible: could be one of the following:
"marvell,armada-370-neta" "marvell,armada-370-neta"
"marvell,armada-xp-neta" "marvell,armada-xp-neta"
"marvell,armada-3700-neta" "marvell,armada-3700-neta"
......
...@@ -6,7 +6,7 @@ the first two functions being GPIO in and out. The configuration on ...@@ -6,7 +6,7 @@ the first two functions being GPIO in and out. The configuration on
the pins includes drive strength and pull-up. the pins includes drive strength and pull-up.
Required properties: Required properties:
- compatible: Should be one of the followings (depending on you SoC): - compatible: Should be one of the following (depending on your SoC):
"allwinner,sun4i-a10-pinctrl" "allwinner,sun4i-a10-pinctrl"
"allwinner,sun5i-a10s-pinctrl" "allwinner,sun5i-a10s-pinctrl"
"allwinner,sun5i-a13-pinctrl" "allwinner,sun5i-a13-pinctrl"
......
...@@ -10,7 +10,7 @@ From RK3368 SoCs, the GRF is divided into two sections, ...@@ -10,7 +10,7 @@ From RK3368 SoCs, the GRF is divided into two sections,
Required Properties: Required Properties:
- compatible: GRF should be one of the followings - compatible: GRF should be one of the following:
- "rockchip,rk3036-grf", "syscon": for rk3036 - "rockchip,rk3036-grf", "syscon": for rk3036
- "rockchip,rk3066-grf", "syscon": for rk3066 - "rockchip,rk3066-grf", "syscon": for rk3066
- "rockchip,rk3188-grf", "syscon": for rk3188 - "rockchip,rk3188-grf", "syscon": for rk3188
...@@ -18,7 +18,7 @@ Required Properties: ...@@ -18,7 +18,7 @@ Required Properties:
- "rockchip,rk3288-grf", "syscon": for rk3288 - "rockchip,rk3288-grf", "syscon": for rk3288
- "rockchip,rk3368-grf", "syscon": for rk3368 - "rockchip,rk3368-grf", "syscon": for rk3368
- "rockchip,rk3399-grf", "syscon": for rk3399 - "rockchip,rk3399-grf", "syscon": for rk3399
- compatible: PMUGRF should be one of the followings - compatible: PMUGRF should be one of the following:
- "rockchip,rk3368-pmugrf", "syscon": for rk3368 - "rockchip,rk3368-pmugrf", "syscon": for rk3368
- "rockchip,rk3399-pmugrf", "syscon": for rk3399 - "rockchip,rk3399-pmugrf", "syscon": for rk3399
- compatible: SGRF should be one of the following - compatible: SGRF should be one of the following
......
...@@ -5,7 +5,7 @@ audio data transfer between devices in the system. ...@@ -5,7 +5,7 @@ audio data transfer between devices in the system.
Required properties: Required properties:
- compatible: should be one of the followings - compatible: should be one of the following:
- "rockchip,rk3066-i2s": for rk3066 - "rockchip,rk3066-i2s": for rk3066
- "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188 - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188
- "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288 - "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288
...@@ -17,7 +17,7 @@ Required properties: ...@@ -17,7 +17,7 @@ Required properties:
Documentation/devicetree/bindings/dma/dma.txt Documentation/devicetree/bindings/dma/dma.txt
- dma-names: should include "tx" and "rx". - dma-names: should include "tx" and "rx".
- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. - clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
- clock-names: should contain followings: - clock-names: should contain the following:
- "i2s_hclk": clock for I2S BUS - "i2s_hclk": clock for I2S BUS
- "i2s_clk" : clock for I2S controller - "i2s_clk" : clock for I2S controller
- rockchip,playback-channels: max playback channels, if not set, 8 channels default. - rockchip,playback-channels: max playback channels, if not set, 8 channels default.
......
...@@ -14,7 +14,7 @@ Required properties: ...@@ -14,7 +14,7 @@ Required properties:
- dma-names: should include "tx" and "rx". - dma-names: should include "tx" and "rx".
- clocks: a list of phandle + clock-specifer pairs, one for each entry - clocks: a list of phandle + clock-specifer pairs, one for each entry
in clock-names. in clock-names.
- clock-names: should contain followings: - clock-names: should contain the following:
- "apb": the parent APB clock for this controller - "apb": the parent APB clock for this controller
- "codec": the parent module clock - "codec": the parent module clock
......
...@@ -5,7 +5,7 @@ audio data transfer between devices in the system. ...@@ -5,7 +5,7 @@ audio data transfer between devices in the system.
Required properties: Required properties:
- compatible: should be one of the followings - compatible: should be one of the following:
- "allwinner,sun4i-a10-i2s" - "allwinner,sun4i-a10-i2s"
- "allwinner,sun6i-a31-i2s" - "allwinner,sun6i-a31-i2s"
- reg: physical base address of the controller and length of memory mapped - reg: physical base address of the controller and length of memory mapped
...@@ -15,7 +15,7 @@ Required properties: ...@@ -15,7 +15,7 @@ Required properties:
Documentation/devicetree/bindings/dma/dma.txt Documentation/devicetree/bindings/dma/dma.txt
- dma-names: should include "tx" and "rx". - dma-names: should include "tx" and "rx".
- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. - clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
- clock-names: should contain followings: - clock-names: should contain the following:
- "apb" : clock for the I2S bus interface - "apb" : clock for the I2S bus interface
- "mod" : module clock for the I2S controller - "mod" : module clock for the I2S controller
- #sound-dai-cells : Must be equal to 0 - #sound-dai-cells : Must be equal to 0
......
...@@ -114,11 +114,11 @@ config options. ...@@ -114,11 +114,11 @@ config options.
Memory model -> Sparse Memory (CONFIG_SPARSEMEM) Memory model -> Sparse Memory (CONFIG_SPARSEMEM)
Allow for memory hot-add (CONFIG_MEMORY_HOTPLUG) Allow for memory hot-add (CONFIG_MEMORY_HOTPLUG)
- To enable memory removal, the followings are also necessary - To enable memory removal, the following are also necessary
Allow for memory hot remove (CONFIG_MEMORY_HOTREMOVE) Allow for memory hot remove (CONFIG_MEMORY_HOTREMOVE)
Page Migration (CONFIG_MIGRATION) Page Migration (CONFIG_MIGRATION)
- For ACPI memory hotplug, the followings are also necessary - For ACPI memory hotplug, the following are also necessary
Memory hotplug (under ACPI Support menu) (CONFIG_ACPI_HOTPLUG_MEMORY) Memory hotplug (under ACPI Support menu) (CONFIG_ACPI_HOTPLUG_MEMORY)
This option can be kernel module. This option can be kernel module.
......
...@@ -697,7 +697,7 @@ If it's a regression, at best, send alsa-info outputs of both working ...@@ -697,7 +697,7 @@ If it's a regression, at best, send alsa-info outputs of both working
and non-working kernels. This is really helpful because we can and non-working kernels. This is really helpful because we can
compare the codec registers directly. compare the codec registers directly.
Send a bug report either the followings: Send a bug report either the following:
kernel-bugzilla kernel-bugzilla
https://bugzilla.kernel.org/ https://bugzilla.kernel.org/
......
...@@ -2034,7 +2034,7 @@ static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg) ...@@ -2034,7 +2034,7 @@ static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg)
* This is to expedite speed down decisions right after device is * This is to expedite speed down decisions right after device is
* initially configured. * initially configured.
* *
* The followings are speed down rules. #1 and #2 deal with * The following are speed down rules. #1 and #2 deal with
* DUBIOUS errors. * DUBIOUS errors.
* *
* 1. If more than one DUBIOUS_ATA_BUS or DUBIOUS_TOUT_HSM errors * 1. If more than one DUBIOUS_ATA_BUS or DUBIOUS_TOUT_HSM errors
......
...@@ -21,7 +21,7 @@ ...@@ -21,7 +21,7 @@
supports a variety of varients of Interphase ATM PCI (i)Chip adapter supports a variety of varients of Interphase ATM PCI (i)Chip adapter
card family (See www.iphase.com/products/ClassSheet.cfm?ClassID=ATM) card family (See www.iphase.com/products/ClassSheet.cfm?ClassID=ATM)
in terms of PHY type, the size of control memory and the size of in terms of PHY type, the size of control memory and the size of
packet memory. The followings are the change log and history: packet memory. The following are the change log and history:
Bugfix the Mona's UBR driver. Bugfix the Mona's UBR driver.
Modify the basic memory allocation and dma logic. Modify the basic memory allocation and dma logic.
......
...@@ -21,7 +21,7 @@ ...@@ -21,7 +21,7 @@
supports a variety of varients of Interphase ATM PCI (i)Chip adapter supports a variety of varients of Interphase ATM PCI (i)Chip adapter
card family (See www.iphase.com/products/ClassSheet.cfm?ClassID=ATM) card family (See www.iphase.com/products/ClassSheet.cfm?ClassID=ATM)
in terms of PHY type, the size of control memory and the size of in terms of PHY type, the size of control memory and the size of
packet memory. The followings are the change log and history: packet memory. The following are the change log and history:
Bugfix the Mona's UBR driver. Bugfix the Mona's UBR driver.
Modify the basic memory allocation and dma logic. Modify the basic memory allocation and dma logic.
......
...@@ -1228,7 +1228,7 @@ static int __init devfreq_init(void) ...@@ -1228,7 +1228,7 @@ static int __init devfreq_init(void)
subsys_initcall(devfreq_init); subsys_initcall(devfreq_init);
/* /*
* The followings are helper functions for devfreq user device drivers with * The following are helper functions for devfreq user device drivers with
* OPP framework. * OPP framework.
*/ */
......
...@@ -861,7 +861,7 @@ static ssize_t fan1_pulses_store(struct device *dev, ...@@ -861,7 +861,7 @@ static ssize_t fan1_pulses_store(struct device *dev,
* (i.e. closed or open-loop). * (i.e. closed or open-loop).
* *
* Following documentation about hwmon's sysfs interface, a pwm1_enable node * Following documentation about hwmon's sysfs interface, a pwm1_enable node
* should accept followings: * should accept the following:
* *
* 0 : no fan speed control (i.e. fan at full speed) * 0 : no fan speed control (i.e. fan at full speed)
* 1 : manual fan speed control enabled (use pwm[1-*]) (open-loop) * 1 : manual fan speed control enabled (use pwm[1-*]) (open-loop)
......
...@@ -2049,7 +2049,7 @@ static int diva_dbg_cmp_key(const char *ref, const char *key) { ...@@ -2049,7 +2049,7 @@ static int diva_dbg_cmp_key(const char *ref, const char *key) {
/* /*
In case trace filter starts with "C" character then In case trace filter starts with "C" character then
all following characters are interpreted as command. all following characters are interpreted as command.
Followings commands are available: Following commands are available:
- single, trace single call at time, independent from CPN/CiPN - single, trace single call at time, independent from CPN/CiPN
*/ */
static int diva_mnt_cmp_nmbr(const char *nmbr) { static int diva_mnt_cmp_nmbr(const char *nmbr) {
......
...@@ -3630,7 +3630,7 @@ static int __init pci_apply_final_quirks(void) ...@@ -3630,7 +3630,7 @@ static int __init pci_apply_final_quirks(void)
fs_initcall_sync(pci_apply_final_quirks); fs_initcall_sync(pci_apply_final_quirks);
/* /*
* Followings are device-specific reset methods which can be used to * Following are device-specific reset methods which can be used to
* reset a single function if other methods (e.g. FLR, PM D0->D3) are * reset a single function if other methods (e.g. FLR, PM D0->D3) are
* not available. * not available.
*/ */
......
...@@ -39,7 +39,7 @@ struct fpgaimage { ...@@ -39,7 +39,7 @@ struct fpgaimage {
const struct firmware *fw_entry; const struct firmware *fw_entry;
/* /*
* the followings can be read from bitstream, * the following can be read from bitstream,
* but other image format should have as well * but other image format should have as well
*/ */
char filename[MAX_STR]; char filename[MAX_STR];
......
...@@ -1791,7 +1791,7 @@ static int renesas_usb3_init_ep(struct renesas_usb3 *usb3, struct device *dev, ...@@ -1791,7 +1791,7 @@ static int renesas_usb3_init_ep(struct renesas_usb3 *usb3, struct device *dev,
dev_dbg(dev, "%s: num_usb3_eps = %d\n", __func__, usb3->num_usb3_eps); dev_dbg(dev, "%s: num_usb3_eps = %d\n", __func__, usb3->num_usb3_eps);
/* /*
* This driver prepares pipes as the followings: * This driver prepares pipes as follows:
* - odd pipes = IN pipe * - odd pipes = IN pipe
* - even pipes = OUT pipe (except pipe 0) * - even pipes = OUT pipe (except pipe 0)
*/ */
...@@ -1841,7 +1841,7 @@ static void renesas_usb3_init_ram(struct renesas_usb3 *usb3, struct device *dev, ...@@ -1841,7 +1841,7 @@ static void renesas_usb3_init_ram(struct renesas_usb3 *usb3, struct device *dev,
memset(basead, 0, sizeof(basead)); memset(basead, 0, sizeof(basead));
/* /*
* This driver prepares pipes as the followings: * This driver prepares pipes as follows:
* - all pipes = the same size as "ramsize_per_pipe" * - all pipes = the same size as "ramsize_per_pipe"
* Please refer to the "Method of Specifying RAM Mapping" * Please refer to the "Method of Specifying RAM Mapping"
*/ */
......
...@@ -8,7 +8,7 @@ ...@@ -8,7 +8,7 @@
/* /*
* The use of "&&" / "||" is limited in certain expressions. * The use of "&&" / "||" is limited in certain expressions.
* The followings enable to calculate "and" / "or" with macro expansion only. * The following enable to calculate "and" / "or" with macro expansion only.
*/ */
#define __and(x, y) ___and(x, y) #define __and(x, y) ___and(x, y)
#define ___and(x, y) ____and(__ARG_PLACEHOLDER_##x, y) #define ___and(x, y) ____and(__ARG_PLACEHOLDER_##x, y)
......
...@@ -43,7 +43,7 @@ ...@@ -43,7 +43,7 @@
* Chunks can be determined from the address using the index field * Chunks can be determined from the address using the index field
* in the page struct. The index field contains a pointer to the chunk. * in the page struct. The index field contains a pointer to the chunk.
* *
* To use this allocator, arch code should do the followings. * To use this allocator, arch code should do the following:
* *
* - define __addr_to_pcpu_ptr() and __pcpu_ptr_to_addr() to translate * - define __addr_to_pcpu_ptr() and __pcpu_ptr_to_addr() to translate
* regular address to percpu pointer and back if they need to be * regular address to percpu pointer and back if they need to be
......
...@@ -464,6 +464,7 @@ finsih||finish ...@@ -464,6 +464,7 @@ finsih||finish
flusing||flushing flusing||flushing
folloing||following folloing||following
followign||following followign||following
followings||following
follwing||following follwing||following
forseeable||foreseeable forseeable||foreseeable
forse||force forse||force
......
...@@ -2866,7 +2866,7 @@ static unsigned int ca0132_capture_pcm_delay(struct hda_pcm_stream *info, ...@@ -2866,7 +2866,7 @@ static unsigned int ca0132_capture_pcm_delay(struct hda_pcm_stream *info,
#define CA0132_CODEC_MUTE(xname, nid, dir) \ #define CA0132_CODEC_MUTE(xname, nid, dir) \
CA0132_CODEC_MUTE_MONO(xname, nid, 3, dir) CA0132_CODEC_MUTE_MONO(xname, nid, 3, dir)
/* The followings are for tuning of products */ /* The following are for tuning of products */
#ifdef ENABLE_TUNING_CONTROLS #ifdef ENABLE_TUNING_CONTROLS
static unsigned int voice_focus_vals_lookup[] = { static unsigned int voice_focus_vals_lookup[] = {
......
...@@ -883,7 +883,7 @@ static void snd_ps3_audio_set_base_addr(uint64_t ioaddr_start) ...@@ -883,7 +883,7 @@ static void snd_ps3_audio_set_base_addr(uint64_t ioaddr_start)
static void snd_ps3_audio_fixup(struct snd_ps3_card_info *card) static void snd_ps3_audio_fixup(struct snd_ps3_card_info *card)
{ {
/* /*
* avsetting driver seems to never change the followings * avsetting driver seems to never change the following
* so, init them here once * so, init them here once
*/ */
......
...@@ -368,7 +368,7 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair) ...@@ -368,7 +368,7 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
fsl_asrc_set_watermarks(pair, ASRC_INPUTFIFO_THRESHOLD, fsl_asrc_set_watermarks(pair, ASRC_INPUTFIFO_THRESHOLD,
ASRC_INPUTFIFO_THRESHOLD); ASRC_INPUTFIFO_THRESHOLD);
/* Configure the followings only for Ideal Ratio mode */ /* Configure the following only for Ideal Ratio mode */
if (!ideal) if (!ideal)
return 0; return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment