Commit 40cbfa90 authored by Srinivas Dasari's avatar Srinivas Dasari Committed by Johannes Berg

cfg80211/nl80211: Optional authentication offload to userspace

This interface allows the host driver to offload the authentication to
user space. This is exclusively defined for host drivers that do not
define separate commands for authentication and association, but rely on
userspace SME (e.g., in wpa_supplicant for the ~WPA_DRIVER_FLAGS_SME
case) for the authentication to happen. This can be used to implement
SAE without full implementation in the kernel/firmware while still being
able to use NL80211_CMD_CONNECT with driver-based BSS selection.

Host driver sends NL80211_CMD_EXTERNAL_AUTH event to start/abort
authentication to the port on which connect is triggered and status
of authentication is further indicated by user space to host
driver through the same command response interface.

User space entities advertise this capability through the
NL80211_ATTR_EXTERNAL_AUTH_SUPP flag in the NL80211_CMD_CONNECT request.
Host drivers shall look at this capability to offload the authentication.
Signed-off-by: default avatarSrinivas Dasari <dasaris@qti.qualcomm.com>
Signed-off-by: default avatarJouni Malinen <jouni@qca.qualcomm.com>
[add socket connection ownership check]
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
parent 5037a009
...@@ -1905,11 +1905,16 @@ struct cfg80211_auth_request { ...@@ -1905,11 +1905,16 @@ struct cfg80211_auth_request {
* @ASSOC_REQ_DISABLE_HT: Disable HT (802.11n) * @ASSOC_REQ_DISABLE_HT: Disable HT (802.11n)
* @ASSOC_REQ_DISABLE_VHT: Disable VHT * @ASSOC_REQ_DISABLE_VHT: Disable VHT
* @ASSOC_REQ_USE_RRM: Declare RRM capability in this association * @ASSOC_REQ_USE_RRM: Declare RRM capability in this association
* @CONNECT_REQ_EXTERNAL_AUTH_SUPPORT: User space indicates external
* authentication capability. Drivers can offload authentication to
* userspace if this flag is set. Only applicable for cfg80211_connect()
* request (connect callback).
*/ */
enum cfg80211_assoc_req_flags { enum cfg80211_assoc_req_flags {
ASSOC_REQ_DISABLE_HT = BIT(0), ASSOC_REQ_DISABLE_HT = BIT(0),
ASSOC_REQ_DISABLE_VHT = BIT(1), ASSOC_REQ_DISABLE_VHT = BIT(1),
ASSOC_REQ_USE_RRM = BIT(2), ASSOC_REQ_USE_RRM = BIT(2),
CONNECT_REQ_EXTERNAL_AUTH_SUPPORT = BIT(3),
}; };
/** /**
...@@ -2600,6 +2605,33 @@ struct cfg80211_pmk_conf { ...@@ -2600,6 +2605,33 @@ struct cfg80211_pmk_conf {
const u8 *pmk_r0_name; const u8 *pmk_r0_name;
}; };
/**
* struct cfg80211_external_auth_params - Trigger External authentication.
*
* Commonly used across the external auth request and event interfaces.
*
* @action: action type / trigger for external authentication. Only significant
* for the authentication request event interface (driver to user space).
* @bssid: BSSID of the peer with which the authentication has
* to happen. Used by both the authentication request event and
* authentication response command interface.
* @ssid: SSID of the AP. Used by both the authentication request event and
* authentication response command interface.
* @key_mgmt_suite: AKM suite of the respective authentication. Used by the
* authentication request event interface.
* @status: status code, %WLAN_STATUS_SUCCESS for successful authentication,
* use %WLAN_STATUS_UNSPECIFIED_FAILURE if user space cannot give you
* the real status code for failures. Used only for the authentication
* response command interface (user space to driver).
*/
struct cfg80211_external_auth_params {
enum nl80211_external_auth_action action;
u8 bssid[ETH_ALEN] __aligned(2);
struct cfg80211_ssid ssid;
unsigned int key_mgmt_suite;
u16 status;
};
/** /**
* struct cfg80211_ops - backend description for wireless configuration * struct cfg80211_ops - backend description for wireless configuration
* *
...@@ -2923,6 +2955,9 @@ struct cfg80211_pmk_conf { ...@@ -2923,6 +2955,9 @@ struct cfg80211_pmk_conf {
* (invoked with the wireless_dev mutex held) * (invoked with the wireless_dev mutex held)
* @del_pmk: delete the previously configured PMK for the given authenticator. * @del_pmk: delete the previously configured PMK for the given authenticator.
* (invoked with the wireless_dev mutex held) * (invoked with the wireless_dev mutex held)
*
* @external_auth: indicates result of offloaded authentication processing from
* user space
*/ */
struct cfg80211_ops { struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
...@@ -3216,6 +3251,8 @@ struct cfg80211_ops { ...@@ -3216,6 +3251,8 @@ struct cfg80211_ops {
const struct cfg80211_pmk_conf *conf); const struct cfg80211_pmk_conf *conf);
int (*del_pmk)(struct wiphy *wiphy, struct net_device *dev, int (*del_pmk)(struct wiphy *wiphy, struct net_device *dev,
const u8 *aa); const u8 *aa);
int (*external_auth)(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_external_auth_params *params);
}; };
/* /*
...@@ -6202,6 +6239,17 @@ void cfg80211_nan_func_terminated(struct wireless_dev *wdev, ...@@ -6202,6 +6239,17 @@ void cfg80211_nan_func_terminated(struct wireless_dev *wdev,
/* ethtool helper */ /* ethtool helper */
void cfg80211_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info); void cfg80211_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info);
/**
* cfg80211_external_auth_request - userspace request for authentication
* @netdev: network device
* @params: External authentication parameters
* @gfp: allocation flags
* Returns: 0 on success, < 0 on error
*/
int cfg80211_external_auth_request(struct net_device *netdev,
struct cfg80211_external_auth_params *params,
gfp_t gfp);
/* Logging, debugging and troubleshooting/diagnostic helpers. */ /* Logging, debugging and troubleshooting/diagnostic helpers. */
/* wiphy_printk helpers, similar to dev_printk */ /* wiphy_printk helpers, similar to dev_printk */
......
...@@ -992,6 +992,27 @@ ...@@ -992,6 +992,27 @@
* *
* @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded. * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded.
* *
* @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host
* drivers that do not define separate commands for authentication and
* association, but rely on user space for the authentication to happen.
* This interface acts both as the event request (driver to user space)
* to trigger the authentication and command response (userspace to
* driver) to indicate the authentication status.
*
* User space uses the %NL80211_CMD_CONNECT command to the host driver to
* trigger a connection. The host driver selects a BSS and further uses
* this interface to offload only the authentication part to the user
* space. Authentication frames are passed between the driver and user
* space through the %NL80211_CMD_FRAME interface. Host driver proceeds
* further with the association after getting successful authentication
* status. User space indicates the authentication status through
* %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH
* command interface.
*
* Host driver reports this status on an authentication failure to the
* user space through the connect result as the user space would have
* initiated the connection through the connect request.
*
* @NL80211_CMD_MAX: highest used command number * @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use * @__NL80211_CMD_AFTER_LAST: internal use
*/ */
...@@ -1198,6 +1219,8 @@ enum nl80211_commands { ...@@ -1198,6 +1219,8 @@ enum nl80211_commands {
NL80211_CMD_RELOAD_REGDB, NL80211_CMD_RELOAD_REGDB,
NL80211_CMD_EXTERNAL_AUTH,
/* add new commands above here */ /* add new commands above here */
/* used to define NL80211_CMD_MAX below */ /* used to define NL80211_CMD_MAX below */
...@@ -2153,6 +2176,16 @@ enum nl80211_commands { ...@@ -2153,6 +2176,16 @@ enum nl80211_commands {
* @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT. * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT.
* @NL80211_ATTR_PORT_AUTHORIZED: (reserved) * @NL80211_ATTR_PORT_AUTHORIZED: (reserved)
* *
* @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external
* authentication operation (u32 attribute with an
* &enum nl80211_external_auth_action value). This is used with the
* &NL80211_CMD_EXTERNAL_AUTH request event.
* @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user
* space supports external authentication. This attribute shall be used
* only with %NL80211_CMD_CONNECT request. The driver may offload
* authentication processing to user space if this capability is indicated
* in NL80211_CMD_CONNECT requests from the user space.
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined * @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use * @__NL80211_ATTR_AFTER_LAST: internal use
...@@ -2579,6 +2612,9 @@ enum nl80211_attrs { ...@@ -2579,6 +2612,9 @@ enum nl80211_attrs {
NL80211_ATTR_PMKR0_NAME, NL80211_ATTR_PMKR0_NAME,
NL80211_ATTR_PORT_AUTHORIZED, NL80211_ATTR_PORT_AUTHORIZED,
NL80211_ATTR_EXTERNAL_AUTH_ACTION,
NL80211_ATTR_EXTERNAL_AUTH_SUPPORT,
/* add attributes here, update the policy in nl80211.c */ /* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST, __NL80211_ATTR_AFTER_LAST,
...@@ -5495,4 +5531,15 @@ enum nl80211_nan_match_attributes { ...@@ -5495,4 +5531,15 @@ enum nl80211_nan_match_attributes {
NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1 NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1
}; };
/**
* nl80211_external_auth_action - Action to perform with external
* authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION.
* @NL80211_EXTERNAL_AUTH_START: Start the authentication.
* @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication.
*/
enum nl80211_external_auth_action {
NL80211_EXTERNAL_AUTH_START,
NL80211_EXTERNAL_AUTH_ABORT,
};
#endif /* __LINUX_NL80211_H */ #endif /* __LINUX_NL80211_H */
...@@ -420,6 +420,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = { ...@@ -420,6 +420,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_FILS_CACHE_ID] = { .len = 2 }, [NL80211_ATTR_FILS_CACHE_ID] = { .len = 2 },
[NL80211_ATTR_PMK] = { .type = NLA_BINARY, .len = PMK_MAX_LEN }, [NL80211_ATTR_PMK] = { .type = NLA_BINARY, .len = PMK_MAX_LEN },
[NL80211_ATTR_SCHED_SCAN_MULTI] = { .type = NLA_FLAG }, [NL80211_ATTR_SCHED_SCAN_MULTI] = { .type = NLA_FLAG },
[NL80211_ATTR_EXTERNAL_AUTH_SUPPORT] = { .type = NLA_FLAG },
}; };
/* policy for the key attributes */ /* policy for the key attributes */
...@@ -9161,6 +9162,15 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info) ...@@ -9161,6 +9162,15 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
return -EINVAL; return -EINVAL;
} }
if (nla_get_flag(info->attrs[NL80211_ATTR_EXTERNAL_AUTH_SUPPORT])) {
if (!info->attrs[NL80211_ATTR_SOCKET_OWNER]) {
GENL_SET_ERR_MSG(info,
"external auth requires connection ownership");
return -EINVAL;
}
connect.flags |= CONNECT_REQ_EXTERNAL_AUTH_SUPPORT;
}
wdev_lock(dev->ieee80211_ptr); wdev_lock(dev->ieee80211_ptr);
err = cfg80211_connect(rdev, dev, &connect, connkeys, err = cfg80211_connect(rdev, dev, &connect, connkeys,
...@@ -12469,6 +12479,41 @@ static int nl80211_del_pmk(struct sk_buff *skb, struct genl_info *info) ...@@ -12469,6 +12479,41 @@ static int nl80211_del_pmk(struct sk_buff *skb, struct genl_info *info)
return ret; return ret;
} }
static int nl80211_external_auth(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct cfg80211_external_auth_params params;
if (rdev->ops->external_auth)
return -EOPNOTSUPP;
if (!info->attrs[NL80211_ATTR_SSID])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_BSSID])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_STATUS_CODE])
return -EINVAL;
memset(&params, 0, sizeof(params));
params.ssid.ssid_len = nla_len(info->attrs[NL80211_ATTR_SSID]);
if (params.ssid.ssid_len == 0 ||
params.ssid.ssid_len > IEEE80211_MAX_SSID_LEN)
return -EINVAL;
memcpy(params.ssid.ssid, nla_data(info->attrs[NL80211_ATTR_SSID]),
params.ssid.ssid_len);
memcpy(params.bssid, nla_data(info->attrs[NL80211_ATTR_BSSID]),
ETH_ALEN);
params.status = nla_get_u16(info->attrs[NL80211_ATTR_STATUS_CODE]);
return rdev_external_auth(rdev, dev, &params);
}
#define NL80211_FLAG_NEED_WIPHY 0x01 #define NL80211_FLAG_NEED_WIPHY 0x01
#define NL80211_FLAG_NEED_NETDEV 0x02 #define NL80211_FLAG_NEED_NETDEV 0x02
#define NL80211_FLAG_NEED_RTNL 0x04 #define NL80211_FLAG_NEED_RTNL 0x04
...@@ -13364,6 +13409,14 @@ static const struct genl_ops nl80211_ops[] = { ...@@ -13364,6 +13409,14 @@ static const struct genl_ops nl80211_ops[] = {
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP | .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL, NL80211_FLAG_NEED_RTNL,
}, },
{
.cmd = NL80211_CMD_EXTERNAL_AUTH,
.doit = nl80211_external_auth,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
}; };
...@@ -15375,6 +15428,47 @@ void nl80211_send_ap_stopped(struct wireless_dev *wdev) ...@@ -15375,6 +15428,47 @@ void nl80211_send_ap_stopped(struct wireless_dev *wdev)
nlmsg_free(msg); nlmsg_free(msg);
} }
int cfg80211_external_auth_request(struct net_device *dev,
struct cfg80211_external_auth_params *params,
gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct sk_buff *msg;
void *hdr;
if (!wdev->conn_owner_nlportid)
return -EINVAL;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return -ENOMEM;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_EXTERNAL_AUTH);
if (!hdr)
goto nla_put_failure;
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) ||
nla_put_u32(msg, NL80211_ATTR_AKM_SUITES, params->key_mgmt_suite) ||
nla_put_u32(msg, NL80211_ATTR_EXTERNAL_AUTH_ACTION,
params->action) ||
nla_put(msg, NL80211_ATTR_BSSID, ETH_ALEN, params->bssid) ||
nla_put(msg, NL80211_ATTR_SSID, params->ssid.ssid_len,
params->ssid.ssid))
goto nla_put_failure;
genlmsg_end(msg, hdr);
genlmsg_unicast(wiphy_net(&rdev->wiphy), msg,
wdev->conn_owner_nlportid);
return 0;
nla_put_failure:
nlmsg_free(msg);
return -ENOBUFS;
}
EXPORT_SYMBOL(cfg80211_external_auth_request);
/* initialisation/exit functions */ /* initialisation/exit functions */
int __init nl80211_init(void) int __init nl80211_init(void)
......
...@@ -1190,4 +1190,19 @@ static inline int rdev_del_pmk(struct cfg80211_registered_device *rdev, ...@@ -1190,4 +1190,19 @@ static inline int rdev_del_pmk(struct cfg80211_registered_device *rdev,
trace_rdev_return_int(&rdev->wiphy, ret); trace_rdev_return_int(&rdev->wiphy, ret);
return ret; return ret;
} }
static inline int
rdev_external_auth(struct cfg80211_registered_device *rdev,
struct net_device *dev,
struct cfg80211_external_auth_params *params)
{
int ret = -EOPNOTSUPP;
trace_rdev_external_auth(&rdev->wiphy, dev, params);
if (rdev->ops->external_auth)
ret = rdev->ops->external_auth(&rdev->wiphy, dev, params);
trace_rdev_return_int(&rdev->wiphy, ret);
return ret;
}
#endif /* __CFG80211_RDEV_OPS */ #endif /* __CFG80211_RDEV_OPS */
...@@ -2319,6 +2319,29 @@ TRACE_EVENT(rdev_del_pmk, ...@@ -2319,6 +2319,29 @@ TRACE_EVENT(rdev_del_pmk,
WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(aa)) WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(aa))
); );
TRACE_EVENT(rdev_external_auth,
TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
struct cfg80211_external_auth_params *params),
TP_ARGS(wiphy, netdev, params),
TP_STRUCT__entry(WIPHY_ENTRY
NETDEV_ENTRY
MAC_ENTRY(bssid)
__array(u8, ssid, IEEE80211_MAX_SSID_LEN + 1)
__field(u16, status)
),
TP_fast_assign(WIPHY_ASSIGN;
NETDEV_ASSIGN;
MAC_ASSIGN(bssid, params->bssid);
memset(__entry->ssid, 0, IEEE80211_MAX_SSID_LEN + 1);
memcpy(__entry->ssid, params->ssid.ssid,
params->ssid.ssid_len);
__entry->status = params->status;
),
TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", bssid: " MAC_PR_FMT
", ssid: %s, status: %u", WIPHY_PR_ARG, NETDEV_PR_ARG,
__entry->bssid, __entry->ssid, __entry->status)
);
/************************************************************* /*************************************************************
* cfg80211 exported functions traces * * cfg80211 exported functions traces *
*************************************************************/ *************************************************************/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment