OMAP3EVM: Add vio regulator supply required for ads7846 TSC driver

Add vio regulator supply, needed for ads7846 touchscreen controller
driver.

Tested on OMAP3 (ES3.1 Si) RevG version of EVM.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/board-omap3evm.c

@@ -583,6 +583,25 @@ static struct regulator_init_data omap3_evm_vpll2 = {
 	.consumer_supplies	= &omap3_evm_vpll2_supply,
 };
 
+/* ads7846 on SPI */
+static struct regulator_consumer_supply omap3evm_vio_supply =
+	REGULATOR_SUPPLY("vcc", "spi1.0");
+
+/* VIO for ads7846 */
+static struct regulator_init_data omap3evm_vio = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &omap3evm_vio_supply,
+};
+
 #ifdef CONFIG_WL12XX_PLATFORM_DATA
 
 #define OMAP3EVM_WLAN_PMENA_GPIO	(150)
@@ -639,6 +658,7 @@ static struct twl4030_platform_data omap3evm_twldata = {
 	.codec		= &omap3evm_codec_data,
 	.vdac		= &omap3_evm_vdac,
 	.vpll2		= &omap3_evm_vpll2,
+	.vio		= &omap3evm_vio,
 };
 
 static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {