Merge branch 'mlxsw-thermal-zone'

Jiri Pirko says:

====================
mlxsw: core: Implement thermal zone

Implement thermal zone for mlxsw based HW.
The first patch is just a register dependency for the second patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlxsw/Kconfig

@@ -19,6 +19,15 @@ config MLXSW_CORE_HWMON
 	---help---
 	  Say Y here if you want to expose HWMON interface on mlxsw devices.
 
+config MLXSW_CORE_THERMAL
+	bool "Thermal zone support for Mellanox Technologies Switch ASICs"
+	depends on MLXSW_CORE && THERMAL
+	depends on !(MLXSW_CORE=y && THERMAL=m)
+	default y
+	---help---
+	 Say Y here if you want to automatically control fans speed according
+	 ambient temperature reported by ASIC.
+
 config MLXSW_PCI
 	tristate "PCI bus implementation for Mellanox Technologies Switch ASICs"
 	depends on PCI && HAS_DMA && HAS_IOMEM && MLXSW_CORE

drivers/net/ethernet/mellanox/mlxsw/Makefile

 obj-$(CONFIG_MLXSW_CORE)	+= mlxsw_core.o
 mlxsw_core-objs			:= core.o
 mlxsw_core-$(CONFIG_MLXSW_CORE_HWMON) += core_hwmon.o
+mlxsw_core-$(CONFIG_MLXSW_CORE_THERMAL) += core_thermal.o
 obj-$(CONFIG_MLXSW_PCI)		+= mlxsw_pci.o
 mlxsw_pci-objs			:= pci.o
 obj-$(CONFIG_MLXSW_I2C)		+= mlxsw_i2c.o

drivers/net/ethernet/mellanox/mlxsw/core.c

@@ -131,6 +131,7 @@ struct mlxsw_core {
 	} lag;
 	struct mlxsw_res res;
 	struct mlxsw_hwmon *hwmon;
+	struct mlxsw_thermal *thermal;
 	struct mlxsw_core_port ports[MLXSW_PORT_MAX_PORTS];
 	unsigned long driver_priv[0];
 	/* driver_priv has to be always the last item */
@@ -1162,6 +1163,11 @@ int mlxsw_core_bus_device_register(const struct mlxsw_bus_info *mlxsw_bus_info,
 	if (err)
 		goto err_hwmon_init;
 
+	err = mlxsw_thermal_init(mlxsw_core, mlxsw_bus_info,
+				 &mlxsw_core->thermal);
+	if (err)
+		goto err_thermal_init;
+
 	if (mlxsw_driver->init) {
 		err = mlxsw_driver->init(mlxsw_core, mlxsw_bus_info);
 		if (err)
@@ -1178,6 +1184,7 @@ int mlxsw_core_bus_device_register(const struct mlxsw_bus_info *mlxsw_bus_info,
 	if (mlxsw_core->driver->fini)
 		mlxsw_core->driver->fini(mlxsw_core);
 err_driver_init:
+err_thermal_init:
 err_hwmon_init:
 	devlink_unregister(devlink);
 err_devlink_register:
@@ -1204,6 +1211,7 @@ void mlxsw_core_bus_device_unregister(struct mlxsw_core *mlxsw_core)
 	mlxsw_core_debugfs_fini(mlxsw_core);
 	if (mlxsw_core->driver->fini)
 		mlxsw_core->driver->fini(mlxsw_core);
+	mlxsw_thermal_fini(mlxsw_core->thermal);
 	devlink_unregister(devlink);
 	mlxsw_emad_fini(mlxsw_core);
 	mlxsw_core->bus->fini(mlxsw_core->bus_priv);

drivers/net/ethernet/mellanox/mlxsw/core.h

@@ -321,4 +321,28 @@ static inline int mlxsw_hwmon_init(struct mlxsw_core *mlxsw_core,
 
 #endif
 
+struct mlxsw_thermal;
+
+#ifdef CONFIG_MLXSW_CORE_THERMAL
+
+int mlxsw_thermal_init(struct mlxsw_core *mlxsw_core,
+		       const struct mlxsw_bus_info *mlxsw_bus_info,
+		       struct mlxsw_thermal **p_thermal);
+void mlxsw_thermal_fini(struct mlxsw_thermal *thermal);
+
+#else
+
+static inline int mlxsw_thermal_init(struct mlxsw_core *mlxsw_core,
+				     const struct mlxsw_bus_info *mlxsw_bus_info,
+				     struct mlxsw_thermal **p_thermal)
+{
+	return 0;
+}
+
+static inline void mlxsw_thermal_fini(struct mlxsw_thermal *thermal)
+{
+}
+
+#endif
+
 #endif

drivers/net/ethernet/mellanox/mlxsw/reg.h

@@ -4518,6 +4518,54 @@ static inline void mlxsw_reg_mfsm_pack(char *payload, u8 tacho)
 	mlxsw_reg_mfsm_tacho_set(payload, tacho);
 }
 
+/* MFSL - Management Fan Speed Limit Register
+ * ------------------------------------------
+ * The Fan Speed Limit register is used to configure the fan speed
+ * event / interrupt notification mechanism. Fan speed threshold are
+ * defined for both under-speed and over-speed.
+ */
+#define MLXSW_REG_MFSL_ID 0x9004
+#define MLXSW_REG_MFSL_LEN 0x0C
+
+MLXSW_REG_DEFINE(mfsl, MLXSW_REG_MFSL_ID, MLXSW_REG_MFSL_LEN);
+
+/* reg_mfsl_tacho
+ * Fan tachometer index.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, mfsl, tacho, 0x00, 24, 4);
+
+/* reg_mfsl_tach_min
+ * Tachometer minimum value (minimum RPM).
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mfsl, tach_min, 0x04, 0, 16);
+
+/* reg_mfsl_tach_max
+ * Tachometer maximum value (maximum RPM).
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mfsl, tach_max, 0x08, 0, 16);
+
+static inline void mlxsw_reg_mfsl_pack(char *payload, u8 tacho,
+				       u16 tach_min, u16 tach_max)
+{
+	MLXSW_REG_ZERO(mfsl, payload);
+	mlxsw_reg_mfsl_tacho_set(payload, tacho);
+	mlxsw_reg_mfsl_tach_min_set(payload, tach_min);
+	mlxsw_reg_mfsl_tach_max_set(payload, tach_max);
+}
+
+static inline void mlxsw_reg_mfsl_unpack(char *payload, u8 tacho,
+					 u16 *p_tach_min, u16 *p_tach_max)
+{
+	if (p_tach_min)
+		*p_tach_min = mlxsw_reg_mfsl_tach_min_get(payload);
+
+	if (p_tach_max)
+		*p_tach_max = mlxsw_reg_mfsl_tach_max_get(payload);
+}
+
 /* MTCAP - Management Temperature Capabilities
  * -------------------------------------------
  * This register exposes the capabilities of the device and
@@ -5228,6 +5276,7 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = {
 	MLXSW_REG(mfcr),
 	MLXSW_REG(mfsc),
 	MLXSW_REG(mfsm),
+	MLXSW_REG(mfsl),
 	MLXSW_REG(mtcap),
 	MLXSW_REG(mtmp),
 	MLXSW_REG(mpat),