Commit 427d0bd4 authored by Boaz Harrosh's avatar Boaz Harrosh Committed by James Bottomley

[SCSI] ide-scsi.: convert to data accessors and !use_sg cleanup

 - Convert ide-scsi to the new data accessors and cleanup
   the !use_sg code paths.

  In old code the driver was trying to translate narrow commands,
  if received, to wide commands. This code  path still assumed
  scsi_cmnd->request_buffer is a linear char pointer.
  This means that this driver was broken since 2.6.17.

  As suggested by Christoph Hellwig I set
  use_10_for_rw = 1; and use_10_for_ms = 1;
  for this device and completely killed the translation.
Signed-off-by: default avatarBoaz Harrosh <bharrosh@panasas.com>
Acked-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent 52aeeca9
......@@ -82,14 +82,12 @@ typedef struct idescsi_pc_s {
*/
#define PC_DMA_IN_PROGRESS 0 /* 1 while DMA in progress */
#define PC_WRITING 1 /* Data direction */
#define PC_TRANSFORM 2 /* transform SCSI commands */
#define PC_TIMEDOUT 3 /* command timed out */
#define PC_DMA_OK 4 /* Use DMA */
/*
* SCSI command transformation layer
*/
#define IDESCSI_TRANSFORM 0 /* Enable/Disable transformation */
#define IDESCSI_SG_TRANSFORM 1 /* /dev/sg transformation */
/*
......@@ -175,7 +173,8 @@ static void idescsi_input_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsigne
char *buf;
while (bcount) {
if (pc->sg - (struct scatterlist *) pc->scsi_cmd->request_buffer > pc->scsi_cmd->use_sg) {
if (pc->sg - scsi_sglist(pc->scsi_cmd) >
scsi_sg_count(pc->scsi_cmd)) {
printk (KERN_ERR "ide-scsi: scatter gather table too small, discarding data\n");
idescsi_discard_data (drive, bcount);
return;
......@@ -210,7 +209,8 @@ static void idescsi_output_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsign
char *buf;
while (bcount) {
if (pc->sg - (struct scatterlist *) pc->scsi_cmd->request_buffer > pc->scsi_cmd->use_sg) {
if (pc->sg - scsi_sglist(pc->scsi_cmd) >
scsi_sg_count(pc->scsi_cmd)) {
printk (KERN_ERR "ide-scsi: scatter gather table too small, padding with zeros\n");
idescsi_output_zeros (drive, bcount);
return;
......@@ -239,77 +239,6 @@ static void idescsi_output_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsign
}
}
/*
* Most of the SCSI commands are supported directly by ATAPI devices.
* idescsi_transform_pc handles the few exceptions.
*/
static inline void idescsi_transform_pc1 (ide_drive_t *drive, idescsi_pc_t *pc)
{
u8 *c = pc->c, *scsi_buf = pc->buffer, *sc = pc->scsi_cmd->cmnd;
char *atapi_buf;
if (!test_bit(PC_TRANSFORM, &pc->flags))
return;
if (drive->media == ide_cdrom || drive->media == ide_optical) {
if (c[0] == READ_6 || c[0] == WRITE_6) {
c[8] = c[4]; c[5] = c[3]; c[4] = c[2];
c[3] = c[1] & 0x1f; c[2] = 0; c[1] &= 0xe0;
c[0] += (READ_10 - READ_6);
}
if (c[0] == MODE_SENSE || c[0] == MODE_SELECT) {
unsigned short new_len;
if (!scsi_buf)
return;
if ((atapi_buf = kmalloc(pc->buffer_size + 4, GFP_ATOMIC)) == NULL)
return;
memset(atapi_buf, 0, pc->buffer_size + 4);
memset (c, 0, 12);
c[0] = sc[0] | 0x40;
c[1] = sc[1];
c[2] = sc[2];
new_len = sc[4] + 4;
c[8] = new_len;
c[7] = new_len >> 8;
c[9] = sc[5];
if (c[0] == MODE_SELECT_10) {
atapi_buf[1] = scsi_buf[0]; /* Mode data length */
atapi_buf[2] = scsi_buf[1]; /* Medium type */
atapi_buf[3] = scsi_buf[2]; /* Device specific parameter */
atapi_buf[7] = scsi_buf[3]; /* Block descriptor length */
memcpy(atapi_buf + 8, scsi_buf + 4, pc->buffer_size - 4);
}
pc->buffer = atapi_buf;
pc->request_transfer += 4;
pc->buffer_size += 4;
}
}
}
static inline void idescsi_transform_pc2 (ide_drive_t *drive, idescsi_pc_t *pc)
{
u8 *atapi_buf = pc->buffer;
u8 *sc = pc->scsi_cmd->cmnd;
u8 *scsi_buf = pc->scsi_cmd->request_buffer;
if (!test_bit(PC_TRANSFORM, &pc->flags))
return;
if (drive->media == ide_cdrom || drive->media == ide_optical) {
if (pc->c[0] == MODE_SENSE_10 && sc[0] == MODE_SENSE) {
scsi_buf[0] = atapi_buf[1]; /* Mode data length */
scsi_buf[1] = atapi_buf[2]; /* Medium type */
scsi_buf[2] = atapi_buf[3]; /* Device specific parameter */
scsi_buf[3] = atapi_buf[7]; /* Block descriptor length */
memcpy(scsi_buf + 4, atapi_buf + 8, pc->request_transfer - 8);
}
if (pc->c[0] == INQUIRY) {
scsi_buf[2] |= 2; /* ansi_revision */
scsi_buf[3] = (scsi_buf[3] & 0xf0) | 2; /* response data format */
}
}
if (atapi_buf && atapi_buf != scsi_buf)
kfree(atapi_buf);
}
static void hexdump(u8 *x, int len)
{
int i;
......@@ -393,7 +322,6 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs)
idescsi_pc_t *pc = (idescsi_pc_t *) rq->special;
int log = test_bit(IDESCSI_LOG_CMD, &scsi->log);
struct Scsi_Host *host;
u8 *scsi_buf;
int errors = rq->errors;
unsigned long flags;
......@@ -434,15 +362,6 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs)
pc->scsi_cmd->result = (CHECK_CONDITION << 1) | (DID_OK << 16);
} else {
pc->scsi_cmd->result = DID_OK << 16;
idescsi_transform_pc2 (drive, pc);
if (log) {
printk ("ide-scsi: %s: suc %lu", drive->name, pc->scsi_cmd->serial_number);
if (!test_bit(PC_WRITING, &pc->flags) && pc->actually_transferred && pc->actually_transferred <= 1024 && pc->buffer) {
printk(", rst = ");
scsi_buf = pc->scsi_cmd->request_buffer;
hexdump(scsi_buf, min_t(unsigned, 16, pc->scsi_cmd->request_bufflen));
} else printk("\n");
}
}
host = pc->scsi_cmd->device->host;
spin_lock_irqsave(host->host_lock, flags);
......@@ -637,19 +556,14 @@ static int idescsi_map_sg(ide_drive_t *drive, idescsi_pc_t *pc)
return 1;
sg = hwif->sg_table;
scsi_sg = pc->scsi_cmd->request_buffer;
segments = pc->scsi_cmd->use_sg;
scsi_sg = scsi_sglist(pc->scsi_cmd);
segments = scsi_sg_count(pc->scsi_cmd);
if (segments > hwif->sg_max_nents)
return 1;
if (!segments) {
hwif->sg_nents = 1;
sg_init_one(sg, pc->scsi_cmd->request_buffer, pc->request_transfer);
} else {
hwif->sg_nents = segments;
memcpy(sg, scsi_sg, sizeof(*sg) * segments);
}
hwif->sg_nents = segments;
memcpy(sg, scsi_sg, sizeof(*sg) * segments);
return 0;
}
......@@ -744,7 +658,6 @@ static void idescsi_setup (ide_drive_t *drive, idescsi_scsi_t *scsi)
{
if (drive->id && (drive->id->config & 0x0060) == 0x20)
set_bit (IDESCSI_DRQ_INTERRUPT, &scsi->flags);
set_bit(IDESCSI_TRANSFORM, &scsi->transform);
clear_bit(IDESCSI_SG_TRANSFORM, &scsi->transform);
#if IDESCSI_DEBUG_LOG
set_bit(IDESCSI_LOG_CMD, &scsi->log);
......@@ -838,6 +751,8 @@ static struct block_device_operations idescsi_ops = {
static int idescsi_slave_configure(struct scsi_device * sdp)
{
/* Configure detected device */
sdp->use_10_for_rw = 1;
sdp->use_10_for_ms = 1;
scsi_adjust_queue_depth(sdp, MSG_SIMPLE_TAG, sdp->host->cmd_per_lun);
return 0;
}
......@@ -862,24 +777,6 @@ static int idescsi_ioctl (struct scsi_device *dev, int cmd, void __user *arg)
return -EINVAL;
}
static inline int should_transform(ide_drive_t *drive, struct scsi_cmnd *cmd)
{
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
/* this was a layering violation and we can't support it
anymore, sorry. */
#if 0
struct gendisk *disk = cmd->request->rq_disk;
if (disk) {
struct struct scsi_device_Template **p = disk->private_data;
if (strcmp((*p)->scsi_driverfs_driver.name, "sg") == 0)
return test_bit(IDESCSI_SG_TRANSFORM, &scsi->transform);
}
#endif
return test_bit(IDESCSI_TRANSFORM, &scsi->transform);
}
static int idescsi_queue (struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
......@@ -905,23 +802,14 @@ static int idescsi_queue (struct scsi_cmnd *cmd,
pc->flags = 0;
pc->rq = rq;
memcpy (pc->c, cmd->cmnd, cmd->cmd_len);
if (cmd->use_sg) {
pc->buffer = NULL;
pc->sg = cmd->request_buffer;
} else {
pc->buffer = cmd->request_buffer;
pc->sg = NULL;
}
pc->buffer = NULL;
pc->sg = scsi_sglist(cmd);
pc->b_count = 0;
pc->request_transfer = pc->buffer_size = cmd->request_bufflen;
pc->request_transfer = pc->buffer_size = scsi_bufflen(cmd);
pc->scsi_cmd = cmd;
pc->done = done;
pc->timeout = jiffies + cmd->timeout_per_command;
if (should_transform(drive, cmd))
set_bit(PC_TRANSFORM, &pc->flags);
idescsi_transform_pc1 (drive, pc);
if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number);
hexdump(cmd->cmnd, cmd->cmd_len);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment