Skip to content

L
linux
Commit 4286f84e authored by Benjamin Herrenschmidt's avatar Benjamin Herrenschmidt
Browse files
Options

Merge remote-tracking branch 'kumar/next' into next

parents 2d87e06e e96dde2b
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 6119 additions and 730 deletions
Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt 0 → 100644
View file @ 4286f84e
* FSL MPIC Message Registers
This binding specifies what properties must be available in the device tree
representation of the message register blocks found in some FSL MPIC
implementations.
Required properties:
- compatible: Specifies the compatibility list for the message register
block. The type shall be <string-list> and the value shall be of the form
"fsl,mpic-v<version>-msgr", where <version> is the version number of
the MPIC containing the message registers.
- reg: Specifies the base physical address(s) and size(s) of the
message register block's addressable register space. The type shall be
<prop-encoded-array>.
- interrupts: Specifies a list of interrupt-specifiers which are available
for receiving interrupts. Interrupt-specifier consists of two cells: first
cell is interrupt-number and second cell is level-sense. The type shall be
<prop-encoded-array>.
Optional properties:
- mpic-msgr-receive-mask: Specifies what registers in the containing block
are allowed to receive interrupts. The value is a bit mask where a set
bit at bit 'n' indicates that message register 'n' can receive interrupts.
Note that "bit 'n'" is numbered from LSB for PPC hardware. The type shall
be <u32>. If not present, then all of the message registers in the block
are available.
Aliases:
An alias should be created for every message register block. They are not
required, though. However, a particular implementation of this binding
may require aliases to be present. Aliases are of the form
'mpic-msgr-block<n>', where <n> is an integer specifying the block's number.
Numbers shall start at 0.
Example:
aliases {
mpic-msgr-block0 = &mpic_msgr_block0;
mpic-msgr-block1 = &mpic_msgr_block1;
};
mpic_msgr_block0: mpic-msgr-block@41400 {
compatible = "fsl,mpic-v3.1-msgr";
reg = <0x41400 0x200>;
// Message registers 0 and 2 in this block can receive interrupts on
// sources 0xb0 and 0xb2, respectively.
interrupts = <0xb0 2 0xb2 2>;
mpic-msgr-receive-mask = <0x5>;
};
mpic_msgr_block1: mpic-msgr-block@42400 {
compatible = "fsl,mpic-v3.1-msgr";
reg = <0x42400 0x200>;
// Message registers 0 and 2 in this block can receive interrupts on
// sources 0xb4 and 0xb6, respectively.
interrupts = <0xb4 2 0xb6 2>;
mpic-msgr-receive-mask = <0x5>;
};
Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
View file @ 4286f84e
......@@ -6,8 +6,10 @@ Required properties:
etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
the parent type.
- reg : should contain the address and the length of the shared message
interrupt register set.
- reg : It may contain one or two regions. The first region should contain
the address and the length of the shared message interrupt register set.
The second region should contain the address of aliased MSIIR register for
platforms that have such an alias.
- msi-available-ranges: use <start count> style section to define which
msi interrupt can be used in the 256 msi interrupts. This property is
......
arch/powerpc/boot/Makefile
View file @ 4286f84e
......@@ -247,7 +247,7 @@ image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot
image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads
image-$(CONFIG_MPC8560_ADS) += cuImage.mpc8560ads
image-$(CONFIG_MPC85xx_CDS) += cuImage.mpc8541cds \
cuImage.mpc8548cds \
cuImage.mpc8548cds_32b \
cuImage.mpc8555cds
image-$(CONFIG_MPC85xx_MDS) += cuImage.mpc8568mds
image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \
......
arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
View file @ 4286f84e
......@@ -202,7 +202,7 @@ L2: l2-cache-controller@20000 {
/include/ "pq3-etsec1-timer-0.dtsi"
usb@22000 {
compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
reg = <0x22000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
......@@ -210,7 +210,7 @@ usb@22000 {
};
usb@23000 {
compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
reg = <0x23000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
......
arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
View file @ 4286f84e
......@@ -89,6 +89,21 @@ pcie@0 {
};
};
&rio {
compatible = "fsl,srio";
interrupts = <48 2 0 0>;
#address-cells = <2>;
#size-cells = <2>;
fsl,srio-rmu-handle = <&rmu>;
ranges;
port1 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <1>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
......@@ -134,6 +149,7 @@ L2: l2-cache-controller@20000 {
/include/ "pq3-sec2.1-0.dtsi"
/include/ "pq3-mpic.dtsi"
/include/ "pq3-rmu-0.dtsi"
global-utilities@e0000 {
compatible = "fsl,mpc8548-guts";
......
arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
View file @ 4286f84e
......@@ -43,7 +43,9 @@ aliases {
serial0 = &serial0;
serial1 = &serial1;
ethernet0 = &enet0;
ethernet1 = &enet2;
ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
......
arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
View file @ 4286f84e
......@@ -156,6 +156,9 @@ L2: l2-cache-controller@20000 {
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-usb2-dr-0.dtsi"
usb@22000 {
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
};
/include/ "pq3-esdhc-0.dtsi"
sdhc@2e000 {
compatible = "fsl,p1010-esdhc", "fsl,esdhc";
......
arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
View file @ 4286f84e
......@@ -142,7 +142,13 @@ L2: l2-cache-controller@20000 {
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-usb2-dr-0.dtsi"
usb@22000 {
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
};
/include/ "pq3-usb2-dr-1.dtsi"
usb@23000 {
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
};
/include/ "pq3-esdhc-0.dtsi"
sdhc@2e000 {
......
arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
View file @ 4286f84e
......@@ -142,8 +142,15 @@ L2: l2-cache-controller@20000 {
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-usb2-dr-0.dtsi"
usb@22000 {
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
};
/include/ "pq3-esdhc-0.dtsi"
sdhc@2e000 {
sdhci,auto-cmd12;
};
/include/ "pq3-sec3.3-0.dtsi"
/include/ "pq3-mpic.dtsi"
......
arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
View file @ 4286f84e
......@@ -35,7 +35,11 @@
&lbc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
/*
* The localbus on the P1022 is not a simple-bus because of the eLBC
* pin muxing when the DIU is enabled.
*/
compatible = "fsl,p1022-elbc", "fsl,elbc";
interrupts = <19 2 0 0>;
};
......@@ -199,7 +203,13 @@ L2: l2-cache-controller@20000 {
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-usb2-dr-0.dtsi"
usb@22000 {
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
};
/include/ "pq3-usb2-dr-1.dtsi"
usb@23000 {
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
};
/include/ "pq3-esdhc-0.dtsi"
sdhc@2e000 {
......
arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
View file @ 4286f84e
......@@ -142,6 +142,9 @@ L2: l2-cache-controller@20000 {
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-usb2-dr-0.dtsi"
usb@22000 {
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
};
crypto: crypto@300000 {
compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
......
arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
View file @ 4286f84e
......@@ -171,6 +171,9 @@ L2: l2-cache-controller@20000 {
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-usb2-dr-0.dtsi"
usb@22000 {
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
};
/include/ "pq3-etsec1-0.dtsi"
/include/ "pq3-etsec1-timer-0.dtsi"
......
arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
View file @ 4286f84e
......@@ -309,12 +309,14 @@ sdhc@114000 {
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
usb0: usb@210000 {
compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
phy_type = "utmi";
port0;
};
/include/ "qoriq-usb2-dr-0.dtsi"
usb1: usb@211000 {
compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
dr_mode = "host";
phy_type = "utmi";
};
......
arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
View file @ 4286f84e
......@@ -336,12 +336,14 @@ sdhc@114000 {
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
usb0: usb@210000 {
compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph";
phy_type = "utmi";
port0;
};
/include/ "qoriq-usb2-dr-0.dtsi"
usb1: usb@211000 {
compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
dr_mode = "host";
phy_type = "utmi";
};
......
arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
View file @ 4286f84e
......@@ -291,6 +291,12 @@ spi@110000 {
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
usb@210000 {
compatible = "fsl-usb2-mph-v2.2", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
};
/include/ "qoriq-usb2-dr-0.dtsi"
usb@211000 {
compatible = "fsl-usb2-dr-v2.2", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
};
/include/ "qoriq-sec4.1-0.dtsi"
};
arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
View file @ 4286f84e
......@@ -339,12 +339,14 @@ sdhc@114000 {
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
usb0: usb@210000 {
compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
phy_type = "utmi";
port0;
};
/include/ "qoriq-usb2-dr-0.dtsi"
usb1: usb@211000 {
compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
dr_mode = "host";
phy_type = "utmi";
};
......
arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi
View file @ 4286f84e
/*
* PQ3 eTSEC device tree stub [ @ offsets 0x24000 ]
*
* Copyright 2011 Freescale Semiconductor Inc.
* Copyright 2011-2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
......@@ -41,6 +41,7 @@ ethernet@24000 {
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
};
......
arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi
View file @ 4286f84e
/*
* PQ3 eTSEC device tree stub [ @ offsets 0x25000 ]
*
* Copyright 2011 Freescale Semiconductor Inc.
* Copyright 2011-2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
......@@ -41,6 +41,7 @@ ethernet@25000 {
compatible = "gianfar";
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
};
......
arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi
View file @ 4286f84e
/*
* PQ3 eTSEC device tree stub [ @ offsets 0x26000 ]
*
* Copyright 2011 Freescale Semiconductor Inc.
* Copyright 2011-2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
......@@ -41,6 +41,7 @@ ethernet@26000 {
compatible = "gianfar";
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
};
......
arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi
View file @ 4286f84e
/*
* PQ3 eTSEC device tree stub [ @ offsets 0x27000 ]
*
* Copyright 2011 Freescale Semiconductor Inc.
* Copyright 2011-2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
......@@ -41,6 +41,7 @@ ethernet@27000 {
compatible = "gianfar";
reg = <0x27000 0x1000>;
ranges = <0x0 0x27000 0x1000>;
fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
};
......
arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
View file @ 4286f84e
......@@ -33,32 +33,32 @@
*/
crypto@30000 {
compatible = "fsl,sec4.4", "fsl,sec4.0";
compatible = "fsl,sec-v4.4", "fsl,sec-v4.0";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x30000 0x10000>;
interrupts = <58 2 0 0>;
sec_jr0: jr@1000 {
compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <45 2 0 0>;
};
sec_jr1: jr@2000 {
compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
reg = <0x2000 0x1000>;
interrupts = <45 2 0 0>;
};
sec_jr2: jr@3000 {
compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
reg = <0x3000 0x1000>;
interrupts = <45 2 0 0>;
};
sec_jr3: jr@4000 {
compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
reg = <0x4000 0x1000>;
interrupts = <45 2 0 0>;
};
......
arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
View file @ 4286f84e
......@@ -53,7 +53,7 @@ timer@41100 {
msi0: msi@41600 {
compatible = "fsl,mpic-msi";
reg = <0x41600 0x200>;
reg = <0x41600 0x200 0x44140 4>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xe0 0 0 0
......@@ -68,7 +68,7 @@ msi0: msi@41600 {
msi1: msi@41800 {
compatible = "fsl,mpic-msi";
reg = <0x41800 0x200>;
reg = <0x41800 0x200 0x45140 4>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xe8 0 0 0
......@@ -83,7 +83,7 @@ msi1: msi@41800 {
msi2: msi@41a00 {
compatible = "fsl,mpic-msi";
reg = <0x41a00 0x200>;
reg = <0x41a00 0x200 0x46140 4>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xf0 0 0 0
......
arch/powerpc/boot/dts/ge_imp3a.dts 0 → 100644
View file @ 4286f84e
/*
* GE IMP3A Device Tree Source
*
* Copyright 2010-2011 GE Intelligent Platforms Embedded Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* Based on: P2020 DS Device Tree Source
* Copyright 2009 Freescale Semiconductor Inc.
*/
/include/ "fsl/p2020si-pre.dtsi"
/ {
model = "GE_IMP3A";
compatible = "ge,imp3a";
memory {
device_type = "memory";
};
lbc: localbus@fef05000 {
reg = <0 0xfef05000 0 0x1000>;
ranges = <0x0 0x0 0x0 0xff000000 0x01000000
0x1 0x0 0x0 0xe0000000 0x08000000
0x2 0x0 0x0 0xe8000000 0x08000000
0x3 0x0 0x0 0xfc100000 0x00020000
0x4 0x0 0x0 0xfc000000 0x00008000
0x5 0x0 0x0 0xfc008000 0x00008000
0x6 0x0 0x0 0xfee00000 0x00040000
0x7 0x0 0x0 0xfee80000 0x00040000>;
/* nor@0,0 is a mirror of part of the memory in nor@1,0
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ge,imp3a-firmware-mirror", "cfi-flash";
reg = <0x0 0x0 0x1000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
label = "firmware";
reg = <0x0 0x1000000>;
read-only;
};
};
*/
nor@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ge,imp3a-paged-flash", "cfi-flash";
reg = <0x1 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
label = "user";
reg = <0x0 0x7800000>;
};
partition@7800000 {
label = "firmware";
reg = <0x7800000 0x800000>;
read-only;
};
};
nvram@3,0 {
device_type = "nvram";
compatible = "simtek,stk14ca8";
reg = <0x3 0x0 0x20000>;
};
fpga@4,0 {
compatible = "ge,imp3a-fpga-regs";
reg = <0x4 0x0 0x20>;
};
gef_pic: pic@4,20 {
#interrupt-cells = <1>;
interrupt-controller;
device_type = "interrupt-controller";
compatible = "ge,imp3a-fpga-pic", "gef,fpga-pic-1.00";
reg = <0x4 0x20 0x20>;
interrupts = <6 7 0 0>;
};
gef_gpio: gpio@4,400 {
#gpio-cells = <2>;
compatible = "ge,imp3a-gpio";
reg = <0x4 0x400 0x24>;
gpio-controller;
};
wdt@4,800 {
compatible = "ge,imp3a-fpga-wdt", "gef,fpga-wdt-1.00",
"gef,fpga-wdt";
reg = <0x4 0x800 0x8>;
interrupts = <10 4>;
interrupt-parent = <&gef_pic>;
};
/* Second watchdog available, driver currently supports one.
wdt@4,808 {
compatible = "gef,imp3a-fpga-wdt", "gef,fpga-wdt-1.00",
"gef,fpga-wdt";
reg = <0x4 0x808 0x8>;
interrupts = <9 4>;
interrupt-parent = <&gef_pic>;
};
*/
nand@6,0 {
compatible = "fsl,elbc-fcm-nand";
reg = <0x6 0x0 0x40000>;
};
nand@7,0 {
compatible = "fsl,elbc-fcm-nand";
reg = <0x7 0x0 0x40000>;
};
};
soc: soc@fef00000 {
ranges = <0x0 0 0xfef00000 0x100000>;
i2c@3000 {
hwmon@48 {
compatible = "national,lm92";
reg = <0x48>;
};
hwmon@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
};
rtc@51 {
compatible = "epson,rx8581";
reg = <0x51>;
};
eti@6b {
compatible = "dallas,ds1682";
reg = <0x6b>;
};
};
usb@22000 {
phy_type = "ulpi";
dr_mode = "host";
};
mdio@24520 {
phy0: ethernet-phy@0 {
interrupt-parent = <&gef_pic>;
interrupts = <0xc 0x4>;
reg = <0x1>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&gef_pic>;
interrupts = <0xb 0x4>;
reg = <0x2>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
status = "disabled";
};
enet0: ethernet@24000 {
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
};
enet1: ethernet@25000 {
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "gmii";
};
enet2: ethernet@26000 {
status = "disabled";
};
};
pci0: pcie@fef08000 {
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xfe020000 0x0 0x10000>;
reg = <0 0xfef08000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
};
};
pci1: pcie@fef09000 {
reg = <0 0xfef09000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xfe010000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
};
};
pci2: pcie@fef0a000 {
reg = <0 0xfef0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xfe000000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
};
};
};
/include/ "fsl/p2020si-post.dtsi"
arch/powerpc/boot/dts/mpc836x_mds.dts
View file @ 4286f84e
......@@ -405,6 +405,10 @@ phy1: ethernet-phy@01 {
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi-phy@2 {
device_type = "tbi-phy";
reg = <0x2>;
};
};
qeic: interrupt-controller@80 {
......
arch/powerpc/boot/dts/mpc8536ds.dts
View file @ 4286f84e
/*
* MPC8536 DS Device Tree Source
*
* Copyright 2008 Freescale Semiconductor, Inc.
* Copyright 2008, 2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -34,6 +34,10 @@ memory {
lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
0x2 0x0 0x0 0xffa00000 0x00040000
0x3 0x0 0x0 0xffdf0000 0x00008000>;
};
board_soc: soc: soc@ffe00000 {
......
arch/powerpc/boot/dts/mpc8536ds.dtsi
View file @ 4286f84e
......@@ -32,6 +32,99 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
reg = <0x0 0x03000000>;
label = "ramdisk-nor";
};
partition@3000000 {
reg = <0x03000000 0x00e00000>;
label = "diagnostic-nor";
read-only;
};
partition@3e00000 {
reg = <0x03e00000 0x00200000>;
label = "dink-nor";
read-only;
};
partition@4000000 {
reg = <0x04000000 0x00400000>;
label = "kernel-nor";
};
partition@4400000 {
reg = <0x04400000 0x03b00000>;
label = "fs-nor";
};
partition@7f00000 {
reg = <0x07f00000 0x00080000>;
label = "dtb-nor";
};
partition@7f80000 {
reg = <0x07f80000 0x00080000>;
label = "u-boot-nor";
read-only;
};
};
nand@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8536-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x2 0x0 0x40000>;
partition@0 {
reg = <0x0 0x02000000>;
label = "u-boot-nand";
read-only;
};
partition@2000000 {
reg = <0x02000000 0x10000000>;
label = "fs-nand";
};
partition@12000000 {
reg = <0x12000000 0x08000000>;
label = "ramdisk-nand";
};
partition@1a000000 {
reg = <0x1a000000 0x04000000>;
label = "kernel-nand";
};
partition@1e000000 {
reg = <0x1e000000 0x01000000>;
label = "dtb-nand";
};
partition@1f000000 {
reg = <0x1f000000 0x21000000>;
label = "empty-nand";
};
};
board-control@3,0 {
compatible = "fsl,mpc8536ds-fpga-pixis";
reg = <0x3 0x0 0x8000>;
};
};
&board_soc {
i2c@3100 {
rtc@68 {
......
arch/powerpc/boot/dts/mpc8536ds_36b.dts
View file @ 4286f84e
/*
* MPC8536DS Device Tree Source (36-bit address map)
*
* Copyright 2008-2009 Freescale Semiconductor, Inc.
* Copyright 2008-2009, 2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -33,7 +33,11 @@ memory {
};
lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
reg = <0xf 0xffe05000 0 0x1000>;
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x2 0x0 0xf 0xffa00000 0x00040000
0x3 0x0 0xf 0xffdf0000 0x00008000>;
};
board_soc: soc: soc@fffe00000 {
......
arch/powerpc/boot/dts/mpc8548cds.dts deleted 100644 → 0
View file @ 2d87e06e
/*
* MPC8548 CDS Device Tree Source
*
* Copyright 2006, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "fsl/mpc8548si-pre.dtsi"
/ {
model = "MPC8548CDS";
compatible = "MPC8548CDS", "MPC85xxCDS";
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
};
memory {
device_type = "memory";
reg = <0 0 0x0 0x8000000>; // 128M at 0x0
};
lbc: localbus@e0005000 {
reg = <0 0xe0005000 0 0x1000>;
};
soc: soc8548@e0000000 {
ranges = <0 0x0 0xe0000000 0x100000>;
i2c@3000 {
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
eeprom@56 {
compatible = "atmel,24c64";
reg = <0x56>;
};
eeprom@57 {
compatible = "atmel,24c64";
reg = <0x57>;
};
};
i2c@3100 {
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
};
enet0: ethernet@24000 {
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
};
mdio@24520 {
phy0: ethernet-phy@0 {
interrupts = <5 1 0 0>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupts = <5 1 0 0>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupts = <5 1 0 0>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupts = <5 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet1: ethernet@25000 {
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};
mdio@25520 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet2: ethernet@26000 {
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
};
mdio@26520 {
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet3: ethernet@27000 {
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
};
mdio@27520 {
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
pci0: pci@e0008000 {
reg = <0 0xe0008000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000
0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>;
clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x4 (PCIX Slot 2) */
0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x5 (PCIX Slot 3) */
0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
/* IDSEL 0x6 (PCIX Slot 4) */
0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x8 (PCIX Slot 5) */
0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0xC (Tsi310 bridge) */
0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x14 (Slot 2) */
0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x15 (Slot 3) */
0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
/* IDSEL 0x16 (Slot 4) */
0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x18 (Slot 5) */
0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
pci_bridge@1c {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x00 (PrPMC Site) */
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x04 (VIA chip) */
0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x05 (8139) */
0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
/* IDSEL 0x06 (Slot 6) */
0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDESL 0x07 (Slot 7) */
0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
reg = <0xe000 0x0 0x0 0x0 0x0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x80000>;
clock-frequency = <33333333>;
isa@4 {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <0x2000 0x0 0x0 0x0 0x0>;
ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
interrupt-controller;
device_type = "interrupt-controller";
reg = <0x1 0x20 0x2
0x1 0xa0 0x2
0x1 0x4d0 0x2>;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <0 1 0 0>;
interrupt-parent = <&mpic>;
};
rtc@70 {
compatible = "pnpPNP,b00";
reg = <0x1 0x70 0x2>;
};
};
};
};
pci1: pci@e0009000 {
reg = <0 0xe0009000 0 0x1000>;
ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000
0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>;
clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
};
pci2: pcie@e000a000 {
reg = <0 0xe000a000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "fsl/mpc8548si-post.dtsi"
arch/powerpc/boot/dts/mpc8548cds.dtsi 0 → 100644
View file @ 4286f84e
/*
* MPC8548CDS Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&board_lbc {
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x01000000>;
bank-width = <2>;
device-width = <2>;
partition@0 {
reg = <0x0 0x0b00000>;
label = "ramdisk-nor";
};
partition@300000 {
reg = <0x0b00000 0x0400000>;
label = "kernel-nor";
};
partition@700000 {
reg = <0x0f00000 0x060000>;
label = "dtb-nor";
};
partition@760000 {
reg = <0x0f60000 0x020000>;
label = "env-nor";
read-only;
};
partition@780000 {
reg = <0x0f80000 0x080000>;
label = "u-boot-nor";
read-only;
};
};
board-control@1,0 {
compatible = "fsl,mpc8548cds-fpga";
reg = <0x1 0x0 0x1000>;
};
};
&board_soc {
i2c@3000 {
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
eeprom@56 {
compatible = "atmel,24c64";
reg = <0x56>;
};
eeprom@57 {
compatible = "atmel,24c64";
reg = <0x57>;
};
};
i2c@3100 {
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
};
enet0: ethernet@24000 {
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
};
mdio@24520 {
phy0: ethernet-phy@0 {
interrupts = <5 1 0 0>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupts = <5 1 0 0>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupts = <5 1 0 0>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupts = <5 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet1: ethernet@25000 {
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};
mdio@25520 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet2: ethernet@26000 {
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
};
mdio@26520 {
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet3: ethernet@27000 {
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
};
mdio@27520 {
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
&board_pci0 {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x4 (PCIX Slot 2) */
0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x5 (PCIX Slot 3) */
0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
/* IDSEL 0x6 (PCIX Slot 4) */
0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x8 (PCIX Slot 5) */
0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0xC (Tsi310 bridge) */
0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x14 (Slot 2) */
0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x15 (Slot 3) */
0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
/* IDSEL 0x16 (Slot 4) */
0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x18 (Slot 5) */
0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
pci_bridge@1c {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x00 (PrPMC Site) */
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x04 (VIA chip) */
0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x05 (8139) */
0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
/* IDSEL 0x06 (Slot 6) */
0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDESL 0x07 (Slot 7) */
0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
reg = <0xe000 0x0 0x0 0x0 0x0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x80000>;
clock-frequency = <33333333>;
isa@4 {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <0x2000 0x0 0x0 0x0 0x0>;
ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
interrupt-controller;
device_type = "interrupt-controller";
reg = <0x1 0x20 0x2
0x1 0xa0 0x2
0x1 0x4d0 0x2>;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <0 1 0 0>;
interrupt-parent = <&mpic>;
};
rtc@70 {
compatible = "pnpPNP,b00";
reg = <0x1 0x70 0x2>;
};
};
};
};
arch/powerpc/boot/dts/mpc8548cds_32b.dts 0 → 100644
View file @ 4286f84e
/*
* MPC8548 CDS Device Tree Source (32-bit address map)
*
* Copyright 2006, 2008, 2011-2012 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "fsl/mpc8548si-pre.dtsi"
/ {
model = "MPC8548CDS";
compatible = "MPC8548CDS", "MPC85xxCDS";
memory {
device_type = "memory";
reg = <0 0 0x0 0x8000000>; // 128M at 0x0
};
board_lbc: lbc: localbus@e0005000 {
reg = <0 0xe0005000 0 0x1000>;
ranges = <0x0 0x0 0x0 0xff000000 0x01000000
0x1 0x0 0x0 0xf8004000 0x00001000>;
};
board_soc: soc: soc8548@e0000000 {
ranges = <0 0x0 0xe0000000 0x100000>;
};
board_pci0: pci0: pci@e0008000 {
reg = <0 0xe0008000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000
0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>;
clock-frequency = <66666666>;
};
pci1: pci@e0009000 {
reg = <0 0xe0009000 0 0x1000>;
ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000
0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>;
clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
};
pci2: pcie@e000a000 {
reg = <0 0xe000a000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
rio: rapidio@e00c0000 {
reg = <0x0 0xe00c0000 0x0 0x20000>;
port1 {
ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
};
};
};
/*
* mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings
* for interrupt-map & interrupt-map-mask.
*/
/include/ "fsl/mpc8548si-post.dtsi"
/include/ "mpc8548cds.dtsi"
arch/powerpc/boot/dts/mpc8548cds_36b.dts 0 → 100644
View file @ 4286f84e
/*
* MPC8548 CDS Device Tree Source (36-bit address map)
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "fsl/mpc8548si-pre.dtsi"
/ {
model = "MPC8548CDS";
compatible = "MPC8548CDS", "MPC85xxCDS";
memory {
device_type = "memory";
reg = <0 0 0x0 0x8000000>; // 128M at 0x0
};
board_lbc: lbc: localbus@fe0005000 {
reg = <0xf 0xe0005000 0 0x1000>;
ranges = <0x0 0x0 0xf 0xff000000 0x01000000
0x1 0x0 0xf 0xf8004000 0x00001000>;
};
board_soc: soc: soc8548@fe0000000 {
ranges = <0 0xf 0xe0000000 0x100000>;
};
board_pci0: pci0: pci@fe0008000 {
reg = <0xf 0xe0008000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x10000000
0x1000000 0x0 0x00000000 0xf 0xe2000000 0x0 0x800000>;
clock-frequency = <66666666>;
};
pci1: pci@fe0009000 {
reg = <0xf 0xe0009000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
0x1000000 0x0 0x00000000 0xf 0xe2800000 0x0 0x800000>;
clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
};
pci2: pcie@fe000a000 {
reg = <0xf 0xe000a000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xe3000000 0x0 0x100000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
rio: rapidio@fe00c0000 {
reg = <0xf 0xe00c0000 0x0 0x20000>;
port1 {
ranges = <0x0 0x0 0xc 0x40000000 0x0 0x20000000>;
};
};
};
/*
* mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings
* for interrupt-map & interrupt-map-mask.
*/
/include/ "fsl/mpc8548si-post.dtsi"
/include/ "mpc8548cds.dtsi"
arch/powerpc/boot/dts/mpc8572ds.dtsi
View file @ 4286f84e
......@@ -41,37 +41,47 @@ nor@0,0 {
bank-width = <2>;
device-width = <1>;
ramdisk@0 {
partition@0 {
reg = <0x0 0x03000000>;
read-only;
label = "ramdisk-nor";
};
diagnostic@3000000 {
partition@3000000 {
reg = <0x03000000 0x00e00000>;
label = "diagnostic-nor";
read-only;
};
dink@3e00000 {
partition@3e00000 {
reg = <0x03e00000 0x00200000>;
label = "dink-nor";
read-only;
};
kernel@4000000 {
partition@4000000 {
reg = <0x04000000 0x00400000>;
read-only;
label = "kernel-nor";
};
jffs2@4400000 {
partition@4400000 {
reg = <0x04400000 0x03b00000>;
label = "fs-nor";
};
partition@7f00000 {
reg = <0x07f00000 0x00060000>;
label = "dtb-nor";
};
dtb@7f00000 {
reg = <0x07f00000 0x00080000>;
partition@7f60000 {
reg = <0x07f60000 0x00020000>;
label = "env-nor";
read-only;
};
u-boot@7f80000 {
partition@7f80000 {
reg = <0x07f80000 0x00080000>;
label = "u-boot-nor";
read-only;
};
};
......@@ -83,31 +93,35 @@ nand@2,0 {
"fsl,elbc-fcm-nand";
reg = <0x2 0x0 0x40000>;
u-boot@0 {
partition@0 {
reg = <0x0 0x02000000>;
label = "u-boot-nand";
read-only;
};
jffs2@2000000 {
partition@2000000 {
reg = <0x02000000 0x10000000>;
label = "fs-nand";
};
ramdisk@12000000 {
partition@12000000 {
reg = <0x12000000 0x08000000>;
read-only;
label = "ramdisk-nand";
};
kernel@1a000000 {
partition@1a000000 {
reg = <0x1a000000 0x04000000>;
label = "kernel-nand";
};
dtb@1e000000 {
partition@1e000000 {
reg = <0x1e000000 0x01000000>;
read-only;
label = "dtb-nand";
};
empty@1f000000 {
partition@1f000000 {
reg = <0x1f000000 0x21000000>;
label = "empty-nand";
};
};
......
arch/powerpc/boot/dts/p1010rdb.dtsi
View file @ 4286f84e
......@@ -138,7 +138,7 @@ flash@0 {
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
spi-max-frequency = <50000000>;
spi-max-frequency = <40000000>;
partition@0 {
/* 1MB for u-boot Bootloader Image */
......@@ -196,7 +196,7 @@ phy2: ethernet-phy@2 {
};
tbi-phy@3 {
device-type = "tbi-phy";
device_type = "tbi-phy";
reg = <0x3>;
};
};
......
arch/powerpc/boot/dts/p1020rdb-pc.dtsi 0 → 100644
View file @ 4286f84e
/*
* P1020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x1000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
/* This location must not be altered */
/* 256KB for Vitesse 7385 Switch firmware */
reg = <0x0 0x00040000>;
label = "NOR Vitesse-7385 Firmware";
read-only;
};
partition@40000 {
/* 256KB for DTB Image */
reg = <0x00040000 0x00040000>;
label = "NOR DTB Image";
};
partition@80000 {
/* 3.5 MB for Linux Kernel Image */
reg = <0x00080000 0x00380000>;
label = "NOR Linux Kernel Image";
};
partition@400000 {
/* 11MB for JFFS2 based Root file System */
reg = <0x00400000 0x00b00000>;
label = "NOR JFFS2 Root File System";
};
partition@f00000 {
/* This location must not be altered */
/* 512KB for u-boot Bootloader Image */
/* 512KB for u-boot Environment Variables */
reg = <0x00f00000 0x00100000>;
label = "NOR U-Boot Image";
read-only;
};
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p1020-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x1 0x0 0x40000>;
partition@0 {
/* This location must not be altered */
/* 1MB for u-boot Bootloader Image */
reg = <0x0 0x00100000>;
label = "NAND U-Boot Image";
read-only;
};
partition@100000 {
/* 1MB for DTB Image */
reg = <0x00100000 0x00100000>;
label = "NAND DTB Image";
};
partition@200000 {
/* 4MB for Linux Kernel Image */
reg = <0x00200000 0x00400000>;
label = "NAND Linux Kernel Image";
};
partition@600000 {
/* 4MB for Compressed Root file System Image */
reg = <0x00600000 0x00400000>;
label = "NAND Compressed RFS Image";
};
partition@a00000 {
/* 7MB for JFFS2 based Root file System */
reg = <0x00a00000 0x00700000>;
label = "NAND JFFS2 Root File System";
};
partition@1100000 {
/* 15MB for JFFS2 based Root file System */
reg = <0x01100000 0x00f00000>;
label = "NAND Writable User area";
};
};
L2switch@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "vitesse-7385";
reg = <0x2 0x0 0x20000>;
};
cpld@3,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cpld";
reg = <0x3 0x0 0x20000>;
read-only;
};
};
&soc {
i2c@3000 {
rtc@68 {
compatible = "pericom,pt7c4338";
reg = <0x68>;
};
};
spi@7000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
partition@u-boot {
/* 512KB for u-boot Bootloader Image */
reg = <0x0 0x00080000>;
label = "u-boot";
read-only;
};
partition@dtb {
/* 512KB for DTB Image*/
reg = <0x00080000 0x00080000>;
label = "dtb";
};
partition@kernel {
/* 4MB for Linux Kernel Image */
reg = <0x00100000 0x00400000>;
label = "kernel";
};
partition@fs {
/* 4MB for Compressed RFS Image */
reg = <0x00500000 0x00400000>;
label = "file system";
};
partition@jffs-fs {
/* 7MB for JFFS2 based RFS */
reg = <0x00900000 0x00700000>;
label = "file system jffs2";
};
};
};
usb@22000 {
phy_type = "ulpi";
};
/* USB2 is shared with localbus, so it must be disabled
by default. We can't put 'status = "disabled";' here
since U-Boot doesn't clear the status property when
it enables USB2. OTOH, U-Boot does create a new node
when there isn't any. So, just comment it out.
usb@23000 {
phy_type = "ulpi";
};
*/
mdio@24000 {
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <3 1>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <0x1>;
};
tbi0: tbi-phy@11 {
device_type = "tbi-phy";
reg = <0x11>;
};
};
mdio@25000 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@b0000 {
fixed-link = <1 1 1000 0 0>;
phy-connection-type = "rgmii-id";
};
enet1: ethernet@b1000 {
phy-handle = <&phy0>;
tbi-handle = <&tbi1>;
phy-connection-type = "sgmii";
};
enet2: ethernet@b2000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
};
arch/powerpc/boot/dts/p1020rdb-pc_32b.dts 0 → 100644
View file @ 4286f84e
/*
* P1020 RDB-PC Device Tree Source (32-bit address map)
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1020si-pre.dtsi"
/ {
model = "fsl,P1020RDB-PC";
compatible = "fsl,P1020RDB-PC";
memory {
device_type = "memory";
};
lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
0x1 0x0 0x0 0xff800000 0x00040000
0x2 0x0 0x0 0xffb00000 0x00020000
0x3 0x0 0x0 0xffa00000 0x00020000>;
};
soc: soc@ffe00000 {
ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
reg = <0 0xffe09000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ffe0a000 {
reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "p1020rdb-pc.dtsi"
/include/ "fsl/p1020si-post.dtsi"
arch/powerpc/boot/dts/p1020rdb-pc_36b.dts 0 → 100644
View file @ 4286f84e
/*
* P1020 RDB-PC Device Tree Source (36-bit address map)
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1020si-pre.dtsi"
/ {
model = "fsl,P1020RDB-PC";
compatible = "fsl,P1020RDB-PC";
memory {
device_type = "memory";
};
lbc: localbus@fffe05000 {
reg = <0xf 0xffe05000 0 0x1000>;
/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
ranges = <0x0 0x0 0xf 0xef000000 0x01000000
0x1 0x0 0xf 0xff800000 0x00040000
0x2 0x0 0xf 0xffb00000 0x00040000
0x3 0x0 0xf 0xffa00000 0x00020000>;
};
soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
};
pci0: pcie@fffe09000 {
reg = <0xf 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@fffe0a000 {
reg = <0xf 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "p1020rdb-pc.dtsi"
/include/ "fsl/p1020si-post.dtsi"
arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts 0 → 100644
View file @ 4286f84e
/*
* P1020 RDB-PC Core0 Device Tree Source in CAMP mode.
*
* In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
* can be shared, all the other devices must be assigned to one core only.
* This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb,
* eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi.
*
* Please note to add "-b 0" for core0's dts compiling.
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "p1020rdb-pc_32b.dts"
/ {
model = "fsl,P1020RDB-PC";
compatible = "fsl,P1020RDB-PC";
aliases {
ethernet1 = &enet1;
ethernet2 = &enet2;
serial0 = &serial0;
pci0 = &pci0;
pci1 = &pci1;
};
cpus {
PowerPC,P1020@1 {
status = "disabled";
};
};
memory {
device_type = "memory";
};
localbus@ffe05000 {
status = "disabled";
};
soc@ffe00000 {
serial1: serial@4600 {
status = "disabled";
};
enet0: ethernet@b0000 {
status = "disabled";
};
mpic: pic@40000 {
protected-sources = <
42 29 30 34 /* serial1, enet0-queue-group0 */
17 18 24 45 /* enet0-queue-group1, crypto */
>;
pic-no-reset;
};
};
};
arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts 0 → 100644
View file @ 4286f84e
/*
* P1020 RDB-PC Core1 Device Tree Source in CAMP mode.
*
* In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
* can be shared, all the other devices must be assigned to one core only.
* This dts allows core1 to have l2, eth0, crypto.
*
* Please note to add "-b 1" for core1's dts compiling.
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "p1020rdb-pc_32b.dts"
/ {
model = "fsl,P1020RDB-PC";
compatible = "fsl,P1020RDB-PC";
aliases {
ethernet0 = &enet0;
serial0 = &serial1;
};
cpus {
PowerPC,P1020@0 {
status = "disabled";
};
};
memory {
device_type = "memory";
};
localbus@ffe05000 {
status = "disabled";
};
soc@ffe00000 {
ecm-law@0 {
status = "disabled";
};
ecm@1000 {
status = "disabled";
};
memory-controller@2000 {
status = "disabled";
};
i2c@3000 {
status = "disabled";
};
i2c@3100 {
status = "disabled";
};
serial0: serial@4500 {
status = "disabled";
};
spi@7000 {
status = "disabled";
};
gpio: gpio-controller@f000 {
status = "disabled";
};
dma@21300 {
status = "disabled";
};
mdio@24000 {
status = "disabled";
};
mdio@25000 {
status = "disabled";
};
enet1: ethernet@b1000 {
status = "disabled";
};
enet2: ethernet@b2000 {
status = "disabled";
};
usb@22000 {
status = "disabled";
};
sdhci@2e000 {
status = "disabled";
};
mpic: pic@40000 {
protected-sources = <
16 /* ecm, mem, L2, pci0, pci1 */
43 42 59 /* i2c, serial0, spi */
47 63 62 /* gpio, tdm */
20 21 22 23 /* dma */
03 02 /* mdio */
35 36 40 /* enet1-queue-group0 */
51 52 67 /* enet1-queue-group1 */
31 32 33 /* enet2-queue-group0 */
25 26 27 /* enet2-queue-group1 */
28 72 58 /* usb, sdhci, crypto */
0xb0 0xb1 0xb2 /* message */
0xb3 0xb4 0xb5
0xb6 0xb7
0xe0 0xe1 0xe2 /* msi */
0xe3 0xe4 0xe5
0xe6 0xe7 /* sdhci, crypto , pci */
>;
pic-no-reset;
};
msi@41600 {
status = "disabled";
};
global-utilities@e0000 { //global utilities block
status = "disabled";
};
};
pci0: pcie@ffe09000 {
status = "disabled";
};
pci1: pcie@ffe0a000 {
status = "disabled";
};
};
arch/powerpc/boot/dts/p1021rdb.dts 0 → 100644
View file @ 4286f84e
/*
* P1021 RDB Device Tree Source
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1021si-pre.dtsi"
/ {
model = "fsl,P1021RDB";
compatible = "fsl,P1021RDB-PC";
memory {
device_type = "memory";
};
lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
0x1 0x0 0x0 0xff800000 0x00040000
0x2 0x0 0x0 0xffb00000 0x00020000>;
};
soc: soc@ffe00000 {
ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
reg = <0 0xffe09000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ffe0a000 {
reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
qe: qe@ffe80000 {
ranges = <0x0 0x0 0xffe80000 0x40000>;
reg = <0 0xffe80000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
};
};
/include/ "p1021rdb.dtsi"
/include/ "fsl/p1021si-post.dtsi"
arch/powerpc/boot/dts/p1021rdb.dtsi 0 → 100644
View file @ 4286f84e
/*
* P1021 RDB Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x1000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
/* This location must not be altered */
/* 256KB for Vitesse 7385 Switch firmware */
reg = <0x0 0x00040000>;
label = "NOR Vitesse-7385 Firmware";
read-only;
};
partition@40000 {
/* 256KB for DTB Image */
reg = <0x00040000 0x00040000>;
label = "NOR DTB Image";
};
partition@80000 {
/* 3.5 MB for Linux Kernel Image */
reg = <0x00080000 0x00380000>;
label = "NOR Linux Kernel Image";
};
partition@400000 {
/* 11MB for JFFS2 based Root file System */
reg = <0x00400000 0x00b00000>;
label = "NOR JFFS2 Root File System";
};
partition@f00000 {
/* This location must not be altered */
/* 512KB for u-boot Bootloader Image */
/* 512KB for u-boot Environment Variables */
reg = <0x00f00000 0x00100000>;
label = "NOR U-Boot Image";
};
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p1021-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x1 0x0 0x40000>;
partition@0 {
/* This location must not be altered */
/* 1MB for u-boot Bootloader Image */
reg = <0x0 0x00100000>;
label = "NAND U-Boot Image";
read-only;
};
partition@100000 {
/* 1MB for DTB Image */
reg = <0x00100000 0x00100000>;
label = "NAND DTB Image";
};
partition@200000 {
/* 4MB for Linux Kernel Image */
reg = <0x00200000 0x00400000>;
label = "NAND Linux Kernel Image";
};
partition@600000 {
/* 4MB for Compressed Root file System Image */
reg = <0x00600000 0x00400000>;
label = "NAND Compressed RFS Image";
};
partition@a00000 {
/* 7MB for JFFS2 based Root file System */
reg = <0x00a00000 0x00700000>;
label = "NAND JFFS2 Root File System";
};
partition@1100000 {
/* 15MB for User Writable Area */
reg = <0x01100000 0x00f00000>;
label = "NAND Writable User area";
};
};
L2switch@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "vitesse-7385";
reg = <0x2 0x0 0x20000>;
};
};
&soc {
i2c@3000 {
rtc@68 {
compatible = "pericom,pt7c4338";
reg = <0x68>;
};
};
spi@7000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
partition@u-boot {
/* 512KB for u-boot Bootloader Image */
reg = <0x0 0x00080000>;
label = "SPI Flash U-Boot Image";
read-only;
};
partition@dtb {
/* 512KB for DTB Image */
reg = <0x00080000 0x00080000>;
label = "SPI Flash DTB Image";
};
partition@kernel {
/* 4MB for Linux Kernel Image */
reg = <0x00100000 0x00400000>;
label = "SPI Flash Linux Kernel Image";
};
partition@fs {
/* 4MB for Compressed RFS Image */
reg = <0x00500000 0x00400000>;
label = "SPI Flash Compressed RFSImage";
};
partition@jffs-fs {
/* 7MB for JFFS2 based RFS */
reg = <0x00900000 0x00700000>;
label = "SPI Flash JFFS2 RFS";
};
};
};
usb@22000 {
phy_type = "ulpi";
};
mdio@24000 {
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <3 1 0 0>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <2 1 0 0>;
reg = <0x1>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25000 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26000 {
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@b0000 {
fixed-link = <1 1 1000 0 0>;
phy-connection-type = "rgmii-id";
};
enet1: ethernet@b1000 {
phy-handle = <&phy0>;
tbi-handle = <&tbi1>;
phy-connection-type = "sgmii";
};
enet2: ethernet@b2000 {
phy-handle = <&phy1>;
tbi-handle = <&tbi2>;
phy-connection-type = "rgmii-id";
};
};
arch/powerpc/boot/dts/p1021rdb_36b.dts 0 → 100644
View file @ 4286f84e
/*
* P1021 RDB Device Tree Source (36-bit address map)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1021si-pre.dtsi"
/ {
model = "fsl,P1021RDB";
compatible = "fsl,P1021RDB-PC";
memory {
device_type = "memory";
};
lbc: localbus@fffe05000 {
reg = <0xf 0xffe05000 0 0x1000>;
/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
ranges = <0x0 0x0 0xf 0xef000000 0x01000000
0x1 0x0 0xf 0xff800000 0x00040000
0x2 0x0 0xf 0xffb00000 0x00020000>;
};
soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
};
pci0: pcie@fffe09000 {
ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
reg = <0xf 0xffe09000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@fffe0a000 {
reg = <0xf 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
qe: qe@fffe80000 {
ranges = <0x0 0xf 0xffe80000 0x40000>;
reg = <0xf 0xffe80000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
};
};
/include/ "p1021rdb.dtsi"
/include/ "fsl/p1021si-post.dtsi"
arch/powerpc/boot/dts/p1022ds.dts deleted 100644 → 0
View file @ 2d87e06e
/*
* P1022 DS 36Bit Physical Address Map Device Tree Source
*
* Copyright 2010 Freescale Semiconductor, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/include/ "fsl/p1022si-pre.dtsi"
/ {
model = "fsl,P1022DS";
compatible = "fsl,P1022DS";
memory {
device_type = "memory";
};
lbc: localbus@fffe05000 {
reg = <0xf 0xffe05000 0 0x1000>;
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
0x2 0x0 0xf 0xff800000 0x00040000
0x3 0x0 0xf 0xffdf0000 0x00008000>;
/*
* This node is used to access the pixis via "indirect" mode,
* which is done by writing the pixis register index to chip
* select 0 and the value to/from chip select 1. Indirect
* mode is the only way to access the pixis when DIU video
* is enabled. Note that this assumes that the first column
* of the 'ranges' property above is the chip select number.
*/
board-control@0,0 {
compatible = "fsl,p1022ds-indirect-pixis";
reg = <0x0 0x0 1 /* CS0 */
0x1 0x0 1>; /* CS1 */
};
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
reg = <0x0 0x03000000>;
label = "ramdisk-nor";
read-only;
};
partition@3000000 {
reg = <0x03000000 0x00e00000>;
label = "diagnostic-nor";
read-only;
};
partition@3e00000 {
reg = <0x03e00000 0x00200000>;
label = "dink-nor";
read-only;
};
partition@4000000 {
reg = <0x04000000 0x00400000>;
label = "kernel-nor";
read-only;
};
partition@4400000 {
reg = <0x04400000 0x03b00000>;
label = "jffs2-nor";
};
partition@7f00000 {
reg = <0x07f00000 0x00080000>;
label = "dtb-nor";
read-only;
};
partition@7f80000 {
reg = <0x07f80000 0x00080000>;
label = "u-boot-nor";
read-only;
};
};
nand@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,elbc-fcm-nand";
reg = <0x2 0x0 0x40000>;
partition@0 {
reg = <0x0 0x02000000>;
label = "u-boot-nand";
read-only;
};
partition@2000000 {
reg = <0x02000000 0x10000000>;
label = "jffs2-nand";
};
partition@12000000 {
reg = <0x12000000 0x10000000>;
label = "ramdisk-nand";
read-only;
};
partition@22000000 {
reg = <0x22000000 0x04000000>;
label = "kernel-nand";
};
partition@26000000 {
reg = <0x26000000 0x01000000>;
label = "dtb-nand";
read-only;
};
partition@27000000 {
reg = <0x27000000 0x19000000>;
label = "reserved-nand";
};
};
board-control@3,0 {
compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
reg = <3 0 0x30>;
interrupt-parent = <&mpic>;
/*
* IRQ8 is generated if the "EVENT" switch is pressed
* and PX_CTL[EVESEL] is set to 00.
*/
interrupts = <8 8 0 0>;
};
};
soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
i2c@3100 {
wm8776:codec@1a {
compatible = "wlf,wm8776";
reg = <0x1a>;
/*
* clock-frequency will be set by U-Boot if
* the clock is enabled.
*/
};
};
spi@7000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
partition@0 {
label = "u-boot-spi";
reg = <0x00000000 0x00100000>;
read-only;
};
partition@100000 {
label = "kernel-spi";
reg = <0x00100000 0x00500000>;
read-only;
};
partition@600000 {
label = "dtb-spi";
reg = <0x00600000 0x00100000>;
read-only;
};
partition@700000 {
label = "file system-spi";
reg = <0x00700000 0x00900000>;
};
};
};
ssi@15000 {
fsl,mode = "i2s-slave";
codec-handle = <&wm8776>;
fsl,ssi-asynchronous;
};
usb@22000 {
phy_type = "ulpi";
};
usb@23000 {
status = "disabled";
};
mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x1>;
};
phy1: ethernet-phy@1 {
interrupts = <9 1 0 0>;
reg = <0x2>;
};
tbi-phy@2 {
device_type = "tbi-phy";
reg = <0x2>;
};
};
ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
ethernet@b1000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
};
pci0: pcie@fffe09000 {
reg = <0xf 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@fffe0a000 {
reg = <0xf 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci2: pcie@fffe0b000 {
reg = <0xf 0xffe0b000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "fsl/p1022si-post.dtsi"
arch/powerpc/boot/dts/p1022ds.dtsi 0 → 100644
View file @ 4286f84e
/*
* P1022 DS Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&board_lbc {
/*
* This node is used to access the pixis via "indirect" mode,
* which is done by writing the pixis register index to chip
* select 0 and the value to/from chip select 1. Indirect
* mode is the only way to access the pixis when DIU video
* is enabled. Note that this assumes that the first column
* of the 'ranges' property above is the chip select number.
*/
board-control@0,0 {
compatible = "fsl,p1022ds-indirect-pixis";
reg = <0x0 0x0 1 /* CS0 */
0x1 0x0 1>; /* CS1 */
interrupt-parent = <&mpic>;
interrupts = <8 0 0 0>;
};
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
reg = <0x0 0x03000000>;
label = "ramdisk-nor";
read-only;
};
partition@3000000 {
reg = <0x03000000 0x00e00000>;
label = "diagnostic-nor";
read-only;
};
partition@3e00000 {
reg = <0x03e00000 0x00200000>;
label = "dink-nor";
read-only;
};
partition@4000000 {
reg = <0x04000000 0x00400000>;
label = "kernel-nor";
read-only;
};
partition@4400000 {
reg = <0x04400000 0x03b00000>;
label = "jffs2-nor";
};
partition@7f00000 {
reg = <0x07f00000 0x00080000>;
label = "dtb-nor";
read-only;
};
partition@7f80000 {
reg = <0x07f80000 0x00080000>;
label = "u-boot-nor";
read-only;
};
};
nand@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,elbc-fcm-nand";
reg = <0x2 0x0 0x40000>;
partition@0 {
reg = <0x0 0x02000000>;
label = "u-boot-nand";
read-only;
};
partition@2000000 {
reg = <0x02000000 0x10000000>;
label = "jffs2-nand";
};
partition@12000000 {
reg = <0x12000000 0x10000000>;
label = "ramdisk-nand";
read-only;
};
partition@22000000 {
reg = <0x22000000 0x04000000>;
label = "kernel-nand";
};
partition@26000000 {
reg = <0x26000000 0x01000000>;
label = "dtb-nand";
read-only;
};
partition@27000000 {
reg = <0x27000000 0x19000000>;
label = "reserved-nand";
};
};
board-control@3,0 {
compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
reg = <3 0 0x30>;
interrupt-parent = <&mpic>;
/*
* IRQ8 is generated if the "EVENT" switch is pressed
* and PX_CTL[EVESEL] is set to 00.
*/
interrupts = <8 0 0 0>;
};
};
&board_soc {
i2c@3100 {
wm8776:codec@1a {
compatible = "wlf,wm8776";
reg = <0x1a>;
/*
* clock-frequency will be set by U-Boot if
* the clock is enabled.
*/
};
};
spi@7000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
partition@0 {
label = "u-boot-spi";
reg = <0x00000000 0x00100000>;
read-only;
};
partition@100000 {
label = "kernel-spi";
reg = <0x00100000 0x00500000>;
read-only;
};
partition@600000 {
label = "dtb-spi";
reg = <0x00600000 0x00100000>;
read-only;
};
partition@700000 {
label = "file system-spi";
reg = <0x00700000 0x00900000>;
};
};
};
ssi@15000 {
fsl,mode = "i2s-slave";
codec-handle = <&wm8776>;
fsl,ssi-asynchronous;
};
usb@22000 {
phy_type = "ulpi";
};
usb@23000 {
status = "disabled";
};
mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x1>;
};
phy1: ethernet-phy@1 {
interrupts = <9 1 0 0>;
reg = <0x2>;
};
tbi-phy@2 {
device_type = "tbi-phy";
reg = <0x2>;
};
};
ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
ethernet@b1000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
};
arch/powerpc/boot/dts/p1022ds_32b.dts 0 → 100644
View file @ 4286f84e
/*
* P1022 DS 32-bit Physical Address Map Device Tree Source
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1022si-pre.dtsi"
/ {
model = "fsl,P1022DS";
compatible = "fsl,P1022DS";
memory {
device_type = "memory";
};
board_lbc: lbc: localbus@ffe05000 {
ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
0x1 0x0 0x0 0xe0000000 0x08000000
0x2 0x0 0x0 0xff800000 0x00040000
0x3 0x0 0x0 0xffdf0000 0x00008000>;
reg = <0x0 0xffe05000 0 0x1000>;
};
board_soc: soc: soc@ffe00000 {
ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
reg = <0x0 0xffe09000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ffe0a000 {
ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
reg = <0 0xffe0a000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci2: pcie@ffe0b000 {
ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
reg = <0 0xffe0b000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "fsl/p1022si-post.dtsi"
/include/ "p1022ds.dtsi"
arch/powerpc/boot/dts/p1022ds_36b.dts 0 → 100644
View file @ 4286f84e
/*
* P1022 DS 36-bit Physical Address Map Device Tree Source
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1022si-pre.dtsi"
/ {
model = "fsl,P1022DS";
compatible = "fsl,P1022DS";
memory {
device_type = "memory";
};
board_lbc: lbc: localbus@fffe05000 {
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
0x2 0x0 0xf 0xff800000 0x00040000
0x3 0x0 0xf 0xffdf0000 0x00008000>;
reg = <0xf 0xffe05000 0 0x1000>;
};
board_soc: soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
};
pci0: pcie@fffe09000 {
ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
reg = <0xf 0xffe09000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@fffe0a000 {
ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
reg = <0xf 0xffe0a000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci2: pcie@fffe0b000 {
ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
reg = <0xf 0xffe0b000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "fsl/p1022si-post.dtsi"
/include/ "p1022ds.dtsi"
arch/powerpc/boot/dts/p1025rdb.dtsi 0 → 100644
View file @ 4286f84e
/*
* P1025 RDB Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x1000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
/* This location must not be altered */
/* 256KB for Vitesse 7385 Switch firmware */
reg = <0x0 0x00040000>;
label = "NOR Vitesse-7385 Firmware";
read-only;
};
partition@40000 {
/* 256KB for DTB Image */
reg = <0x00040000 0x00040000>;
label = "NOR DTB Image";
};
partition@80000 {
/* 3.5 MB for Linux Kernel Image */
reg = <0x00080000 0x00380000>;
label = "NOR Linux Kernel Image";
};
partition@400000 {
/* 11MB for JFFS2 based Root file System */
reg = <0x00400000 0x00b00000>;
label = "NOR JFFS2 Root File System";
};
partition@f00000 {
/* This location must not be altered */
/* 512KB for u-boot Bootloader Image */
/* 512KB for u-boot Environment Variables */
reg = <0x00f00000 0x00100000>;
label = "NOR U-Boot Image";
read-only;
};
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p1025-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x1 0x0 0x40000>;
partition@0 {
/* This location must not be altered */
/* 1MB for u-boot Bootloader Image */
reg = <0x0 0x00100000>;
label = "NAND U-Boot Image";
read-only;
};
partition@100000 {
/* 1MB for DTB Image */
reg = <0x00100000 0x00100000>;
label = "NAND DTB Image";
};
partition@200000 {
/* 4MB for Linux Kernel Image */
reg = <0x00200000 0x00400000>;
label = "NAND Linux Kernel Image";
};
partition@600000 {
/* 4MB for Compressed Root file System Image */
reg = <0x00600000 0x00400000>;
label = "NAND Compressed RFS Image";
};
partition@a00000 {
/* 7MB for JFFS2 based Root file System */
reg = <0x00a00000 0x00700000>;
label = "NAND JFFS2 Root File System";
};
partition@1100000 {
/* 15MB for JFFS2 based Root file System */
reg = <0x01100000 0x00f00000>;
label = "NAND Writable User area";
};
};
};
&soc {
i2c@3000 {
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
};
spi@7000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
partition@u-boot {
/* 512KB for u-boot Bootloader Image */
reg = <0x0 0x00080000>;
label = "u-boot";
read-only;
};
partition@dtb {
/* 512KB for DTB Image */
reg = <0x00080000 0x00080000>;
label = "dtb";
};
partition@kernel {
/* 4MB for Linux Kernel Image */
reg = <0x00100000 0x00400000>;
label = "kernel";
};
partition@fs {
/* 4MB for Compressed RFS Image */
reg = <0x00500000 0x00400000>;
label = "file system";
};
partition@jffs-fs {
/* 7MB for JFFS2 based RFS */
reg = <0x00900000 0x00700000>;
label = "file system jffs2";
};
};
};
usb@22000 {
phy_type = "ulpi";
};
/* USB2 is shared with localbus, so it must be disabled
by default. We can't put 'status = "disabled";' here
since U-Boot doesn't clear the status property when
it enables USB2. OTOH, U-Boot does create a new node
when there isn't any. So, just comment it out.
usb@23000 {
phy_type = "ulpi";
};
*/
mdio@24000 {
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <3 1>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <0x1>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25000 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26000 {
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@b0000 {
fixed-link = <1 1 1000 0 0>;
phy-connection-type = "rgmii-id";
};
enet1: ethernet@b1000 {
phy-handle = <&phy0>;
tbi-handle = <&tbi1>;
phy-connection-type = "sgmii";
};
enet2: ethernet@b2000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
par_io@e0100 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xe0100 0x60>;
ranges = <0x0 0xe0100 0x60>;
device_type = "par_io";
num-ports = <3>;
pio1: ucc_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */
0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */
0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */
0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */
0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */
0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */
0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */
0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */
0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */
0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */
0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */
0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */
0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */
0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */
0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */
0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */
};
pio2: ucc_pin@02 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */
0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */
0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */
0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */
0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */
0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */
0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */
0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */
};
};
};
arch/powerpc/boot/dts/p1025rdb_32b.dts 0 → 100644
View file @ 4286f84e
/*
* P1025 RDB Device Tree Source (32-bit address map)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1021si-pre.dtsi"
/ {
model = "fsl,P1025RDB";
compatible = "fsl,P1025RDB";
memory {
device_type = "memory";
};
lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
/* NOR, NAND Flashes */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
0x1 0x0 0x0 0xff800000 0x00040000>;
};
soc: soc@ffe00000 {
ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
reg = <0 0xffe09000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ffe0a000 {
reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
qe: qe@ffe80000 {
ranges = <0x0 0x0 0xffe80000 0x40000>;
reg = <0 0xffe80000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
status = "disabled"; /* no firmware loaded */
enet3: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
rx-clock-name = "clk12";
tx-clock-name = "clk9";
pio-handle = <&pio1>;
phy-handle = <&qe_phy0>;
phy-connection-type = "mii";
};
mdio@2120 {
qe_phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <4 1 0 0>;
reg = <0x6>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@03 {
interrupt-parent = <&mpic>;
interrupts = <5 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet4: ucc@2400 {
device_type = "network";
compatible = "ucc_geth";
rx-clock-name = "none";
tx-clock-name = "clk13";
pio-handle = <&pio2>;
phy-handle = <&qe_phy1>;
phy-connection-type = "rmii";
};
};
};
/include/ "p1025rdb.dtsi"
/include/ "fsl/p1021si-post.dtsi"
arch/powerpc/boot/dts/p1025rdb_36b.dts 0 → 100644
View file @ 4286f84e
/*
* P1025 RDB Device Tree Source (36-bit address map)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1021si-pre.dtsi"
/ {
model = "fsl,P1025RDB";
compatible = "fsl,P1025RDB";
memory {
device_type = "memory";
};
lbc: localbus@fffe05000 {
reg = <0xf 0xffe05000 0 0x1000>;
/* NOR, NAND Flashes */
ranges = <0x0 0x0 0xf 0xef000000 0x01000000
0x1 0x0 0xf 0xff800000 0x00040000>;
};
soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
};
pci0: pcie@fffe09000 {
reg = <0xf 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xe 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@fffe0a000 {
reg = <0xf 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "p1025rdb.dtsi"
/include/ "fsl/p1021si-post.dtsi"
arch/powerpc/boot/dts/p2020rdb-pc.dtsi 0 → 100644
View file @ 4286f84e
/*
* P2020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x1000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
/* This location must not be altered */
/* 256KB for Vitesse 7385 Switch firmware */
reg = <0x0 0x00040000>;
label = "NOR Vitesse-7385 Firmware";
read-only;
};
partition@40000 {
/* 256KB for DTB Image */
reg = <0x00040000 0x00040000>;
label = "NOR DTB Image";
};
partition@80000 {
/* 3.5 MB for Linux Kernel Image */
reg = <0x00080000 0x00380000>;
label = "NOR Linux Kernel Image";
};
partition@400000 {
/* 11MB for JFFS2 based Root file System */
reg = <0x00400000 0x00b00000>;
label = "NOR JFFS2 Root File System";
};
partition@f00000 {
/* This location must not be altered */
/* 512KB for u-boot Bootloader Image */
/* 512KB for u-boot Environment Variables */
reg = <0x00f00000 0x00100000>;
label = "NOR U-Boot Image";
read-only;
};
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p2020-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x1 0x0 0x40000>;
partition@0 {
/* This location must not be altered */
/* 1MB for u-boot Bootloader Image */
reg = <0x0 0x00100000>;
label = "NAND U-Boot Image";
read-only;
};
partition@100000 {
/* 1MB for DTB Image */
reg = <0x00100000 0x00100000>;
label = "NAND DTB Image";
};
partition@200000 {
/* 4MB for Linux Kernel Image */
reg = <0x00200000 0x00400000>;
label = "NAND Linux Kernel Image";
};
partition@600000 {
/* 4MB for Compressed Root file System Image */
reg = <0x00600000 0x00400000>;
label = "NAND Compressed RFS Image";
};
partition@a00000 {
/* 7MB for JFFS2 based Root file System */
reg = <0x00a00000 0x00700000>;
label = "NAND JFFS2 Root File System";
};
partition@1100000 {
/* 15MB for JFFS2 based Root file System */
reg = <0x01100000 0x00f00000>;
label = "NAND Writable User area";
};
};
L2switch@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "vitesse-7385";
reg = <0x2 0x0 0x20000>;
};
cpld@3,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cpld";
reg = <0x3 0x0 0x20000>;
read-only;
};
};
&soc {
i2c@3000 {
rtc@68 {
compatible = "pericom,pt7c4338";
reg = <0x68>;
};
};
spi@7000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,m25p80";
reg = <0>;
spi-max-frequency = <40000000>;
partition@0 {
/* 512KB for u-boot Bootloader Image */
reg = <0x0 0x00080000>;
label = "SPI U-Boot Image";
read-only;
};
partition@80000 {
/* 512KB for DTB Image */
reg = <0x00080000 0x00080000>;
label = "SPI DTB Image";
};
partition@100000 {
/* 4MB for Linux Kernel Image */
reg = <0x00100000 0x00400000>;
label = "SPI Linux Kernel Image";
};
partition@500000 {
/* 4MB for Compressed RFS Image */
reg = <0x00500000 0x00400000>;
label = "SPI Compressed RFS Image";
};
partition@900000 {
/* 7MB for JFFS2 based RFS */
reg = <0x00900000 0x00700000>;
label = "SPI JFFS2 RFS";
};
};
};
usb@22000 {
phy_type = "ulpi";
};
mdio@24520 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupts = <2 1 0 0>;
reg = <0x1>;
};
};
mdio@25520 {
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
status = "disabled";
};
ptp_clock@24e00 {
fsl,tclk-period = <5>;
fsl,tmr-prsc = <200>;
fsl,tmr-add = <0xCCCCCCCD>;
fsl,tmr-fiper1 = <0x3B9AC9FB>;
fsl,tmr-fiper2 = <0x0001869B>;
fsl,max-adj = <249999999>;
};
enet0: ethernet@24000 {
fixed-link = <1 1 1000 0 0>;
phy-connection-type = "rgmii-id";
};
enet1: ethernet@25000 {
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "sgmii";
};
enet2: ethernet@26000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
};
arch/powerpc/boot/dts/p2020rdb-pc_32b.dts 0 → 100644
View file @ 4286f84e
/*
* P2020 RDB-PC 32Bit Physical Address Map Device Tree Source
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p2020si-pre.dtsi"
/ {
model = "fsl,P2020RDB";
compatible = "fsl,P2020RDB-PC";
memory {
device_type = "memory";
};
lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
/* NOR and NAND Flashes */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
0x1 0x0 0x0 0xff800000 0x00040000
0x2 0x0 0x0 0xffb00000 0x00020000
0x3 0x0 0x0 0xffa00000 0x00020000>;
};
soc: soc@ffe00000 {
ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe08000 {
reg = <0 0xffe08000 0 0x1000>;
status = "disabled";
};
pci1: pcie@ffe09000 {
reg = <0 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci2: pcie@ffe0a000 {
reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "p2020rdb-pc.dtsi"
/include/ "fsl/p2020si-post.dtsi"
arch/powerpc/boot/dts/p2020rdb-pc_36b.dts 0 → 100644
View file @ 4286f84e
/*
* P2020 RDB-PC 36Bit Physical Address Map Device Tree Source
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p2020si-pre.dtsi"
/ {
model = "fsl,P2020RDB";
compatible = "fsl,P2020RDB-PC";
memory {
device_type = "memory";
};
lbc: localbus@fffe05000 {
reg = <0xf 0xffe05000 0 0x1000>;
/* NOR and NAND Flashes */
ranges = <0x0 0x0 0xf 0xef000000 0x01000000
0x1 0x0 0xf 0xff800000 0x00040000
0x2 0x0 0xf 0xffb00000 0x00020000
0x3 0x0 0xf 0xffa00000 0x00020000>;
};
soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
};
pci0: pcie@fffe08000 {
reg = <0xf 0xffe08000 0 0x1000>;
status = "disabled";
};
pci1: pcie@fffe09000 {
reg = <0xf 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci2: pcie@fffe0a000 {
reg = <0xf 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "p2020rdb-pc.dtsi"
/include/ "fsl/p2020si-post.dtsi"
arch/powerpc/boot/dts/p2020rdb.dts
View file @ 4286f84e
......@@ -34,7 +34,7 @@ lbc: localbus@ffe05000 {
/* NOR and NAND Flashes */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
0x1 0x0 0x0 0xffa00000 0x00040000
0x1 0x0 0x0 0xff800000 0x00040000
0x2 0x0 0x0 0xffb00000 0x00020000>;
nor@0,0 {
......@@ -157,7 +157,7 @@ flash@0 {
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
spi-max-frequency = <50000000>;
spi-max-frequency = <40000000>;
partition@0 {
/* 512KB for u-boot Bootloader Image */
......
arch/powerpc/configs/85xx/ge_imp3a_defconfig 0 → 100644
View file @ 4286f84e
CONFIG_PPC_85xx=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_SPARSE_IRQ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_PERF_EVENTS=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_GE_IMP3A=y
CONFIG_QUICC_ENGINE=y
CONFIG_QE_GPIO=y
CONFIG_CPM2=y
CONFIG_HIGHMEM=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_HZ_1000=y
CONFIG_PREEMPT=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_PCI=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCI_MSI=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_LOAD_CIS is not set
CONFIG_YENTA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET6_AH=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NET_PKTGEN=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_FSL_ELBC=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
CONFIG_MISC_DEVICES=y
CONFIG_DS1682=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_SIL24=y
# CONFIG_ATA_SFF is not set
CONFIG_NETDEVICES=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL_TRAP=y
CONFIG_TUN=m
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_FS_ENET=y
CONFIG_UCC_GETH=y
CONFIG_GIANFAR=y
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_QE=m
CONFIG_NVRAM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_CPM=m
CONFIG_I2C_MPC=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GE_FPGA=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_WATCHDOG=y
CONFIG_GEF_WDT=y
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_HID_DRAGONRISE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_HID_ZEROPLUS=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_STORAGE=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_MPC85XX=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_DRV_RX8581=y
CONFIG_DMADEVICES=y
CONFIG_FSL_DMA=y
# CONFIG_NET_DMA is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT4_FS=y
CONFIG_FUSE_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
CONFIG_NTFS_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V4=y
CONFIG_CIFS=m
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
CONFIG_CRC_CCITT=y
CONFIG_CRC_T10DIF=y
CONFIG_LIBCRC32C=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DEV_TALITOS=y
arch/powerpc/configs/86xx/gef_ppc9a_defconfig
View file @ 4286f84e
......@@ -131,6 +131,7 @@ CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GE_FPGA=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_WATCHDOG=y
......
arch/powerpc/configs/86xx/gef_sbc310_defconfig
View file @ 4286f84e
......@@ -132,6 +132,7 @@ CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GE_FPGA=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_WATCHDOG=y
......
arch/powerpc/configs/86xx/gef_sbc610_defconfig
View file @ 4286f84e
......@@ -183,6 +183,8 @@ CONFIG_NVRAM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GE_FPGA=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_WATCHDOG=y
......
arch/powerpc/configs/mpc85xx_defconfig
View file @ 4286f84e
CONFIG_PPC_85xx=y
CONFIG_PHYS_64BIT=y
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
......
arch/powerpc/configs/mpc85xx_smp_defconfig
View file @ 4286f84e
CONFIG_PPC_85xx=y
CONFIG_PHYS_64BIT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_EXPERIMENTAL=y
......
arch/powerpc/include/asm/cputable.h
View file @ 4286f84e
......@@ -390,6 +390,10 @@ extern const char *powerpc_base_platform;
CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
CPU_FTR_DEBUG_LVL_EXC)
#define CPU_FTRS_E6500 (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \
CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
CPU_FTR_DEBUG_LVL_EXC)
#define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
/* 64-bit CPUs */
......@@ -442,7 +446,7 @@ extern const char *powerpc_base_platform;
#ifdef __powerpc64__
#ifdef CONFIG_PPC_BOOK3E
#define CPU_FTRS_POSSIBLE (CPU_FTRS_E5500 | CPU_FTRS_A2)
#define CPU_FTRS_POSSIBLE (CPU_FTRS_E6500 | CPU_FTRS_E5500 | CPU_FTRS_A2)
#else
#define CPU_FTRS_POSSIBLE \
(CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \
......@@ -483,7 +487,7 @@ enum {
#endif
#ifdef CONFIG_E500
CPU_FTRS_E500 | CPU_FTRS_E500_2 | CPU_FTRS_E500MC |
CPU_FTRS_E5500 |
CPU_FTRS_E5500 | CPU_FTRS_E6500 |
#endif
0,
};
......@@ -491,7 +495,7 @@ enum {
#ifdef __powerpc64__
#ifdef CONFIG_PPC_BOOK3E
#define CPU_FTRS_ALWAYS (CPU_FTRS_E5500 & CPU_FTRS_A2)
#define CPU_FTRS_ALWAYS (CPU_FTRS_E6500 & CPU_FTRS_E5500 & CPU_FTRS_A2)
#else
#define CPU_FTRS_ALWAYS \
(CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \
......@@ -528,7 +532,7 @@ enum {
#endif
#ifdef CONFIG_E500
CPU_FTRS_E500 & CPU_FTRS_E500_2 & CPU_FTRS_E500MC &
CPU_FTRS_E5500 &
CPU_FTRS_E5500 & CPU_FTRS_E6500 &
#endif
CPU_FTRS_POSSIBLE,
};
......
arch/powerpc/include/asm/fsl_guts.h
View file @ 4286f84e
......@@ -4,7 +4,7 @@
* Authors: Jeff Brown
* Timur Tabi <timur@freescale.com>
*
* Copyright 2004,2007 Freescale Semiconductor, Inc
* Copyright 2004,2007,2012 Freescale Semiconductor, Inc
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -114,6 +114,10 @@ struct ccsr_guts_86xx {
__be32 srds2cr1; /* 0x.0f44 - SerDes2 Control Register 0 */
} __attribute__ ((packed));
/* Alternate function signal multiplex control */
#define MPC85xx_PMUXCR_QE(x) (0x8000 >> (x))
#ifdef CONFIG_PPC_86xx
#define CCSR_GUTS_DMACR_DEV_SSI 0 /* DMA controller/channel set to SSI */
......
arch/powerpc/include/asm/mpic_msgr.h 0 → 100644
View file @ 4286f84e
/*
* Copyright 2011-2012, Meador Inge, Mentor Graphics Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; version 2 of the
* License.
*
*/
#ifndef _ASM_MPIC_MSGR_H
#define _ASM_MPIC_MSGR_H
#include <linux/types.h>
#include <linux/spinlock.h>
struct mpic_msgr {
u32 __iomem *base;
u32 __iomem *mer;
int irq;
unsigned char in_use;
raw_spinlock_t lock;
int num;
};
/* Get a message register
*
* @reg_num: the MPIC message register to get
*
* A pointer to the message register is returned. If
* the message register asked for is already in use, then
* EBUSY is returned. If the number given is not associated
* with an actual message register, then ENODEV is returned.
* Successfully getting the register marks it as in use.
*/
extern struct mpic_msgr *mpic_msgr_get(unsigned int reg_num);
/* Relinquish a message register
*
* @msgr: the message register to return
*
* Disables the given message register and marks it as free.
* After this call has completed successully the message
* register is available to be acquired by a call to
* mpic_msgr_get.
*/
extern void mpic_msgr_put(struct mpic_msgr *msgr);
/* Enable a message register
*
* @msgr: the message register to enable
*
* The given message register is enabled for sending
* messages.
*/
extern void mpic_msgr_enable(struct mpic_msgr *msgr);
/* Disable a message register
*
* @msgr: the message register to disable
*
* The given message register is disabled for sending
* messages.
*/
extern void mpic_msgr_disable(struct mpic_msgr *msgr);
/* Write a message to a message register
*
* @msgr: the message register to write to
* @message: the message to write
*
* The given 32-bit message is written to the given message
* register. Writing to an enabled message registers fires
* an interrupt.
*/
static inline void mpic_msgr_write(struct mpic_msgr *msgr, u32 message)
{
out_be32(msgr->base, message);
}
/* Read a message from a message register
*
* @msgr: the message register to read from
*
* Returns the 32-bit value currently in the given message register.
* Upon reading the register any interrupts for that register are
* cleared.
*/
static inline u32 mpic_msgr_read(struct mpic_msgr *msgr)
{
return in_be32(msgr->base);
}
/* Clear a message register
*
* @msgr: the message register to clear
*
* Clears any interrupts associated with the given message register.
*/
static inline void mpic_msgr_clear(struct mpic_msgr *msgr)
{
(void) mpic_msgr_read(msgr);
}
/* Set the destination CPU for the message register
*
* @msgr: the message register whose destination is to be set
* @cpu_num: the Linux CPU number to bind the message register to
*
* Note that the CPU number given is the CPU number used by the kernel
* and *not* the actual hardware CPU number.
*/
static inline void mpic_msgr_set_destination(struct mpic_msgr *msgr,
u32 cpu_num)
{
out_be32(msgr->base, 1 << get_hard_smp_processor_id(cpu_num));
}
/* Get the IRQ number for the message register
* @msgr: the message register whose IRQ is to be returned
*
* Returns the IRQ number associated with the given message register.
* NO_IRQ is returned if this message register is not capable of
* receiving interrupts. What message register can and cannot receive
* interrupts is specified in the device tree for the system.
*/
static inline int mpic_msgr_get_irq(struct mpic_msgr *msgr)
{
return msgr->irq;
}
#endif
arch/powerpc/include/asm/reg_booke.h
View file @ 4286f84e
......@@ -62,6 +62,7 @@
#define SPRN_DVC2 0x13F /* Data Value Compare Register 2 */
#define SPRN_MAS8 0x155 /* MMU Assist Register 8 */
#define SPRN_TLB0PS 0x158 /* TLB 0 Page Size Register */
#define SPRN_TLB1PS 0x159 /* TLB 1 Page Size Register */
#define SPRN_MAS5_MAS6 0x15c /* MMU Assist Register 5 || 6 */
#define SPRN_MAS8_MAS1 0x15d /* MMU Assist Register 8 || 1 */
#define SPRN_EPTCFG 0x15e /* Embedded Page Table Config */
......
arch/powerpc/kernel/cputable.c
View file @ 4286f84e
......@@ -2019,6 +2019,24 @@ static struct cpu_spec __initdata cpu_specs[] = {
.machine_check = machine_check_e500mc,
.platform = "ppce5500",
},
{ /* e6500 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x80400000,
.cpu_name = "e6500",
.cpu_features = CPU_FTRS_E6500,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
.mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS |
MMU_FTR_USE_TLBILX,
.icache_bsize = 64,
.dcache_bsize = 64,
.num_pmcs = 4,
.oprofile_cpu_type = "ppc/e6500",
.oprofile_type = PPC_OPROFILE_FSL_EMB,
.cpu_setup = __setup_cpu_e5500,
.cpu_restore = __restore_cpu_e5500,
.machine_check = machine_check_e500mc,
.platform = "ppce6500",
},
#ifdef CONFIG_PPC32
{ /* default match */
.pvr_mask = 0x00000000,
......
arch/powerpc/mm/fsl_booke_mmu.c
View file @ 4286f84e
......@@ -149,12 +149,19 @@ static void settlbcam(int index, unsigned long virt, phys_addr_t phys,
unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
phys_addr_t phys)
{
unsigned int camsize = __ilog2(ram) & ~1U;
unsigned int align = __ffs(virt | phys) & ~1U;
unsigned long max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf;
/* Convert (4^max) kB to (2^max) bytes */
max_cam = max_cam * 2 + 10;
unsigned int camsize = __ilog2(ram);
unsigned int align = __ffs(virt | phys);
unsigned long max_cam;
if ((mfspr(SPRN_MMUCFG) & MMUCFG_MAVN) == MMUCFG_MAVN_V1) {
/* Convert (4^max) kB to (2^max) bytes */
max_cam = ((mfspr(SPRN_TLB1CFG) >> 16) & 0xf) * 2 + 10;
camsize &= ~1U;
align &= ~1U;
} else {
/* Convert (2^max) kB to (2^max) bytes */
max_cam = __ilog2(mfspr(SPRN_TLB1PS)) + 10;
}
if (camsize > align)
camsize = align;
......
arch/powerpc/platforms/85xx/Kconfig
View file @ 4286f84e
This diff is collapsed.
arch/powerpc/platforms/85xx/Makefile
View file @ 4286f84e
......@@ -27,3 +27,4 @@ obj-$(CONFIG_SBC8548) += sbc8548.o
obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
obj-$(CONFIG_KSI8560) += ksi8560.o
obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
obj-$(CONFIG_GE_IMP3A) += ge_imp3a.o
arch/powerpc/platforms/85xx/ge_imp3a.c 0 → 100644
View file @ 4286f84e
This diff is collapsed.
arch/powerpc/platforms/85xx/mpc85xx_cds.c
View file @ 4286f84e
This diff is collapsed.
arch/powerpc/platforms/85xx/mpc85xx_mds.c
View file @ 4286f84e
This diff is collapsed.
arch/powerpc/platforms/85xx/mpc85xx_rdb.c
View file @ 4286f84e
This diff is collapsed.
arch/powerpc/platforms/85xx/p1022_ds.c
View file @ 4286f84e
This diff is collapsed.
arch/powerpc/platforms/86xx/Kconfig
View file @ 4286f84e
......@@ -39,6 +39,7 @@ config GEF_PPC9A
select MMIO_NVRAM
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select GE_FPGA
help
This option enables support for the GE PPC9A.
......@@ -48,6 +49,7 @@ config GEF_SBC310
select MMIO_NVRAM
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select GE_FPGA
help
This option enables support for the GE SBC310.
......@@ -57,6 +59,7 @@ config GEF_SBC610
select MMIO_NVRAM
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select GE_FPGA
select HAS_RAPIDIO
help
This option enables support for the GE SBC610.
......
arch/powerpc/platforms/86xx/Makefile
View file @ 4286f84e
......@@ -7,7 +7,6 @@ obj-$(CONFIG_SMP) += mpc86xx_smp.o
obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o
obj-$(CONFIG_SBC8641D) += sbc8641d.o
obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o
gef-gpio-$(CONFIG_GPIOLIB) += gef_gpio.o
obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o gef_pic.o $(gef-gpio-y)
obj-$(CONFIG_GEF_SBC310) += gef_sbc310.o gef_pic.o $(gef-gpio-y)
obj-$(CONFIG_GEF_PPC9A) += gef_ppc9a.o gef_pic.o $(gef-gpio-y)
obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o
obj-$(CONFIG_GEF_SBC310) += gef_sbc310.o
obj-$(CONFIG_GEF_PPC9A) += gef_ppc9a.o
arch/powerpc/platforms/86xx/gef_ppc9a.c
View file @ 4286f84e
This diff is collapsed.
arch/powerpc/platforms/86xx/gef_sbc310.c
View file @ 4286f84e
This diff is collapsed.
arch/powerpc/platforms/86xx/gef_sbc610.c
View file @ 4286f84e
This diff is collapsed.
arch/powerpc/platforms/Kconfig
View file @ 4286f84e
This diff is collapsed.
arch/powerpc/sysdev/Kconfig
View file @ 4286f84e
This diff is collapsed.
arch/powerpc/sysdev/Makefile
View file @ 4286f84e
This diff is collapsed.
arch/powerpc/sysdev/fsl_85xx_cache_sram.c
View file @ 4286f84e
This diff is collapsed.
arch/powerpc/sysdev/fsl_85xx_l2ctlr.c
View file @ 4286f84e
This diff is collapsed.
arch/powerpc/sysdev/fsl_msi.c
View file @ 4286f84e
This diff is collapsed.
arch/powerpc/sysdev/fsl_rio.c
View file @ 4286f84e
This diff is collapsed.
arch/powerpc/sysdev/fsl_rmu.c
View file @ 4286f84e
This diff is collapsed.
arch/powerpc/sysdev/ge/Makefile 0 → 100644
View file @ 4286f84e
obj-$(CONFIG_GE_FPGA) += ge_pic.o
arch/powerpc/sysdev/mpic_msgr.c 0 → 100644
View file @ 4286f84e
This diff is collapsed.
drivers/gpio/Kconfig
View file @ 4286f84e
This diff is collapsed.
drivers/gpio/Makefile
View file @ 4286f84e
This diff is collapsed.
drivers/mtd/nand/Kconfig
View file @ 4286f84e
This diff is collapsed.
drivers/mtd/nand/Makefile
View file @ 4286f84e
This diff is collapsed.
drivers/mtd/nand/fsl_ifc_nand.c 0 → 100644
View file @ 4286f84e
This diff is collapsed.
drivers/watchdog/Kconfig
View file @ 4286f84e
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7