Commit 429188f0 authored by Hans de Goede's avatar Hans de Goede

ACPI / PMIC: Add generic intel_soc_pmic_exec_mipi_pmic_seq_element handling

Most PMIC-s use only a single i2c-address, so after verifying the
i2c-address matches, we can simply pass the call to regmap_update_bits.

This commit adds support for this and hooks this up for the xpower AXP288
PMIC by setting the new pmic_i2c_address field.

This fixes the following errors on display on / off on a Jumper Ezpad
mini 3 and an Onda V80 plus tablet, both of which use the AXP288:

intel_soc_pmic_exec_mipi_pmic_seq_element: Not implemented
intel_soc_pmic_exec_mipi_pmic_seq_element: i2c-addr: 0x34 reg-addr ...
[drm:mipi_exec_pmic [i915]] *ERROR* mipi_exec_pmic failed, error: -95

Instead of these errors on both devices we now correctly turn on / off
DLDO3 (through direct register manipulation). On the Onda V80 plus this
fixes an issue with the backlight being brighter around the borders after
an off / on cycle. This should also help to save some power when the
display is off.
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107111556.4510-4-hdegoede@redhat.com
parent 4f601682
......@@ -359,6 +359,15 @@ int intel_soc_pmic_exec_mipi_pmic_seq_element(u16 i2c_address, u32 reg_address,
ret = d->exec_mipi_pmic_seq_element(intel_pmic_opregion->regmap,
i2c_address, reg_address,
value, mask);
} else if (d->pmic_i2c_address) {
if (i2c_address == d->pmic_i2c_address) {
ret = regmap_update_bits(intel_pmic_opregion->regmap,
reg_address, mask, value);
} else {
pr_err("%s: Unexpected i2c-addr: 0x%02x (reg-addr 0x%x value 0x%x mask 0x%x)\n",
__func__, i2c_address, reg_address, value, mask);
ret = -ENXIO;
}
} else {
pr_warn("%s: Not implemented\n", __func__);
pr_warn("%s: i2c-addr: 0x%x reg-addr 0x%x value 0x%x mask 0x%x\n",
......
......@@ -21,6 +21,8 @@ struct intel_pmic_opregion_data {
int power_table_count;
struct pmic_table *thermal_table;
int thermal_table_count;
/* For generic exec_mipi_pmic_seq_element handling */
int pmic_i2c_address;
};
int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle, struct regmap *regmap, struct intel_pmic_opregion_data *d);
......
......@@ -240,6 +240,7 @@ static struct intel_pmic_opregion_data intel_xpower_pmic_opregion_data = {
.power_table_count = ARRAY_SIZE(power_table),
.thermal_table = thermal_table,
.thermal_table_count = ARRAY_SIZE(thermal_table),
.pmic_i2c_address = 0x34,
};
static acpi_status intel_xpower_pmic_gpio_handler(u32 function,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment