Commit 42c4568a authored by Felix Fietkau's avatar Felix Fietkau Committed by John W. Linville

ath9k: add a workaround for ack timeout issues

Adding support for setting the coverage class in some cases broke
association and data transfer, as it overwrote the initial ACK timeout
value from the initvals with a smaller value.
I don't know why the new value works in 5 GHz (matches the initval
there), but not in 2.4 GHz (initvals use 64us here), so until the
problem is fully understood, the value should be increased again.
Signed-off-by: default avatarFelix Fietkau <nbd@openwrt.org>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 4cad6c7c
......@@ -1217,6 +1217,17 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
/* As defined by IEEE 802.11-2007 17.3.8.6 */
slottime = ah->slottime + 3 * ah->coverage_class;
acktimeout = slottime + sifstime;
/*
* Workaround for early ACK timeouts, add an offset to match the
* initval's 64us ack timeout value.
* This was initially only meant to work around an issue with delayed
* BA frames in some implementations, but it has been found to fix ACK
* timeout issues in other cases as well.
*/
if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ)
acktimeout += 64 - sifstime - ah->slottime;
ath9k_hw_setslottime(ah, slottime);
ath9k_hw_set_ack_timeout(ah, acktimeout);
ath9k_hw_set_cts_timeout(ah, acktimeout);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment