Commit 431107ea authored by Ben Dooks's avatar Ben Dooks

ARM: S3C64XX: Merge mach-s3c6400 and mach-s3c6410

As per discussions with Russell King on linux-arm-kernel, it appears that
both mach-s3c6400 and mach-s3c6410 are so close together that they should
simply be merged into mach-s3c64xx.

Note, this patch does not eliminate any of the bits that are still common,
it is simply a move of the two directories together, any further common
code will be eliminated or moved in further patches.
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
parent ab5d97db
......@@ -799,8 +799,7 @@ source "arch/arm/mach-s3c2443/Kconfig"
endif
if ARCH_S3C64XX
source "arch/arm/mach-s3c6400/Kconfig"
source "arch/arm/mach-s3c6410/Kconfig"
source "arch/arm/mach-s3c64xx/Kconfig"
endif
source "arch/arm/mach-s5p6440/Kconfig"
......
......@@ -160,7 +160,7 @@ machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_RPC) := rpc
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410
machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
machine-$(CONFIG_ARCH_S5P6440) := s5p6440
machine-$(CONFIG_ARCH_S5PC1XX) := s5pc100
machine-$(CONFIG_ARCH_SA1100) := sa1100
......
# Copyright 2008 Openmoko, Inc.
# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
#
# Licensed under GPLv2
# Configuration options for the S3C6410 CPU
config CPU_S3C6400
bool
select CPU_S3C6400_INIT
select CPU_S3C6400_CLOCK
help
Enable S3C6400 CPU support
config S3C6400_SETUP_SDHCI
bool
help
Internal configuration for default SDHCI
setup for S3C6400.
# S36400 Macchine support
config MACH_SMDK6400
bool "SMDK6400"
select CPU_S3C6400
select S3C_DEV_HSMMC
select S3C_DEV_NAND
select S3C6400_SETUP_SDHCI
help
Machine support for the Samsung SMDK6400
# arch/arm/mach-s3c6400/Makefile
#
# Copyright 2008 Openmoko, Inc.
# Copyright 2008 Simtec Electronics
#
# Licensed under GPLv2
obj-y :=
obj-m :=
obj-n :=
obj- :=
# Core support for S3C6400 system
obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
# setup support
obj-$(CONFIG_S3C6400_SETUP_SDHCI) += setup-sdhci.o
# Machine support
obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
# Copyright 2008 Openmoko, Inc.
# Copyright 2008 Simtec Electronics
# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
#
# Licensed under GPLv2
# Configuration options for the S3C6410 CPU
config CPU_S3C6400
bool
select CPU_S3C6400_INIT
select CPU_S3C6400_CLOCK
help
Enable S3C6400 CPU support
config CPU_S3C6410
bool
select CPU_S3C6400_INIT
......@@ -12,12 +19,31 @@ config CPU_S3C6410
help
Enable S3C6410 CPU support
config S3C6400_SETUP_SDHCI
bool
help
Internal configuration for default SDHCI
setup for S3C6400.
config S3C6410_SETUP_SDHCI
bool
select S3C64XX_SETUP_SDHCI_GPIO
help
Internal helper functions for S3C6410 based SDHCI systems
# S36400 Macchine support
config MACH_SMDK6400
bool "SMDK6400"
select CPU_S3C6400
select S3C_DEV_HSMMC
select S3C_DEV_NAND
select S3C6400_SETUP_SDHCI
help
Machine support for the Samsung SMDK6400
# S3C6410 machine support
config MACH_ANW6410
bool "A&W6410"
select CPU_S3C6410
......@@ -58,7 +84,7 @@ config SMDK6410_SD_CH0
at least some SMDK6410 boards come with the
resistors fitted so that the card detects for
channels 0 and 1 are the same.
config SMDK6410_SD_CH1
bool "Use channel 1 only"
depends on MACH_SMDK6410
......
# arch/arm/plat-s3c6410/Makefile
# arch/arm/mach-s3c64xx/Makefile
#
# Copyright 2008 Openmoko, Inc.
# Copyright 2008 Simtec Electronics
......@@ -10,17 +10,20 @@ obj-m :=
obj-n :=
obj- :=
# Core support for S3C6410 system
# Core support for S3C6400 system
obj-$(CONFIG_CPU_S3C6410) += cpu.o
obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
# Helper and device support
# setup support
obj-$(CONFIG_S3C6410_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S3C6400_SETUP_SDHCI) += setup-sdhci-s3c6400.o
obj-$(CONFIG_S3C6410_SETUP_SDHCI) += setup-sdhci-s3c6410.o
# machine support
# Machine support
obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_NCP) += mach-ncp.o
obj-$(CONFIG_MACH_HMT) += mach-hmt.o
/* linux/arch/arm/mach-s3c6410/mach-anw6410.c
/* linux/arch/arm/mach-s3c64xx/mach-anw6410.c
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
......
/*
* linux/arch/arm/mach-s3c6410/mach-ncp.c
* linux/arch/arm/mach-s3c64xx/mach-ncp.c
*
* Copyright (C) 2008-2009 Samsung Electronics
*
......
/* linux/arch/arm/mach-s3c6400/mach-smdk6400.c
/* linux/arch/arm/mach-s3c64xx/mach-smdk6400.c
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
......
/* linux/arch/arm/mach-s3c6410/mach-smdk6410.c
/* linux/arch/arm/mach-s3c64xx/mach-smdk6410.c
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
......
/* linux/arch/arm/mach-s3c6410/cpu.c
/* linux/arch/arm/mach-s3c64xx/cpu.c
*
* Copyright 2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
......
/* linux/arch/arm/mach-s3c6410/cpu.c
/* linux/arch/arm/mach-s3c64xx/s3c6410.c
*
* Copyright 2008 Simtec Electronics
* Copyright 2008 Simtec Electronics
......
/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
/* linux/arch/arm/mach-s3c64xx/setup-sdhci.c
*
* Copyright 2008 Simtec Electronics
* Copyright 2008 Simtec Electronics
......
/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
/* linux/arch/arm/mach-s3c64xx/setup-sdhci.c
*
* Copyright 2008 Simtec Electronics
* Copyright 2008 Simtec Electronics
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment