Commit 43dad399 authored by Arnd Bergmann's avatar Arnd Bergmann Committed by Gregory CLEMENT

ARM: mv78xx0: multiplatform support

The mv78xx0 platform is now ready to be enabled for multiplatform
support, this patch does the switch over by modifying the Kconfig file,
the defconfig and removing the last mach/*.h header that becomes obsolete
with this.
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Acked-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
parent 4c811b99
...@@ -519,20 +519,6 @@ config ARCH_DOVE ...@@ -519,20 +519,6 @@ config ARCH_DOVE
help help
Support for the Marvell Dove SoC 88AP510 Support for the Marvell Dove SoC 88AP510
config ARCH_MV78XX0
bool "Marvell MV78xx0"
select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
select MVEBU_MBUS
select MULTI_IRQ_HANDLER
select PCI
select PLAT_ORION_LEGACY
select SPARSE_IRQ
help
Support for the following Marvell MV78xx0 series SoCs:
MV781x0, MV782x0.
config ARCH_ORION5X config ARCH_ORION5X
bool "Marvell Orion" bool "Marvell Orion"
depends on MMU depends on MMU
......
...@@ -11,6 +11,9 @@ CONFIG_KPROBES=y ...@@ -11,6 +11,9 @@ CONFIG_KPROBES=y
CONFIG_MODULES=y CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_MULTI_V5=y
# CONFIG_ARCH_MULTI_V6 is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_MV78XX0=y CONFIG_ARCH_MV78XX0=y
CONFIG_MACH_DB78X00_BP=y CONFIG_MACH_DB78X00_BP=y
CONFIG_MACH_RD78X00_MASA=y CONFIG_MACH_RD78X00_MASA=y
......
if ARCH_MV78XX0 menuconfig ARCH_MV78XX0
bool "Marvell MV78xx0" if ARCH_MULTI_V5
select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
select MVEBU_MBUS
select PCI
select PLAT_ORION_LEGACY
help
Support for the following Marvell MV78xx0 series SoCs:
MV781x0, MV782x0.
menu "Marvell MV78xx0 Implementations" if ARCH_MV78XX0
config MACH_DB78X00_BP config MACH_DB78X00_BP
bool "Marvell DB-78x00-BP Development Board" bool "Marvell DB-78x00-BP Development Board"
...@@ -20,6 +29,4 @@ config MACH_TERASTATION_WXL ...@@ -20,6 +29,4 @@ config MACH_TERASTATION_WXL
Say 'Y' here if you want your kernel to support the Say 'Y' here if you want your kernel to support the
Buffalo WXL Nas. Buffalo WXL Nas.
endmenu
endif endif
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
obj-y += common.o mpp.o irq.o pcie.o obj-y += common.o mpp.o irq.o pcie.o
obj-$(CONFIG_MACH_DB78X00_BP) += db78x00-bp-setup.o obj-$(CONFIG_MACH_DB78X00_BP) += db78x00-bp-setup.o
obj-$(CONFIG_MACH_RD78X00_MASA) += rd78x00-masa-setup.o obj-$(CONFIG_MACH_RD78X00_MASA) += rd78x00-masa-setup.o
......
/*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/serial_reg.h>
#define UART0_PHYS_BASE (0xf1000000 + 0x12000)
#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
static void putc(const char c)
{
unsigned char *base = SERIAL_BASE;
int i;
for (i = 0; i < 0x1000; i++) {
if (base[UART_LSR << 2] & UART_LSR_THRE)
break;
barrier();
}
base[UART_TX << 2] = c;
}
static void flush(void)
{
unsigned char *base = SERIAL_BASE;
unsigned char mask;
int i;
mask = UART_LSR_TEMT | UART_LSR_THRE;
for (i = 0; i < 0x1000; i++) {
if ((base[UART_LSR << 2] & mask) == mask)
break;
barrier();
}
}
/*
* nothing to do
*/
#define arch_decomp_setup()
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment