Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 platform changes from Ingo Molnar:
 "This tree includes assorted platform driver updates and a preparatory
  series for a platform with custom DMA remapping semantics (sta2x11 I/O
  hub)."

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vsmp: Fix number of CPUs when vsmp is disabled
  keyboard: Use BIOS Keyboard variable to set Numlock
  x86/olpc/xo1/sci: Report RTC wakeup events
  x86/olpc/xo1/sci: Produce wakeup events for buttons and switches
  x86, platform: Initial support for sta2x11 I/O hub
  x86: Introduce CONFIG_X86_DMA_REMAP
  x86-32: Introduce CONFIG_X86_DEV_DMA_OPS

arch/parisc/include/asm/kbdleds.h

+#ifndef _ASM_PARISC_KBDLEDS_H
+#define _ASM_PARISC_KBDLEDS_H
+
+/*
+ * On HIL keyboards of PARISC machines there is no NumLock key and
+ * everyone expects the keypad to be used for numbers. That's why
+ * we can safely turn on the NUMLOCK bit.
+ */
+
+static inline int kbd_defleds(void)
+{
+#if defined(CONFIG_KEYBOARD_HIL) || defined(CONFIG_KEYBOARD_HIL_OLD)
+	return 1 << VC_NUMLOCK;
+#else
+	return 0;
+#endif
+}
+
+#endif /* _ASM_PARISC_KBDLEDS_H */

arch/x86/Kconfig

@@ -12,6 +12,7 @@ config X86_32
 
 config X86_64
 	def_bool 64BIT
+	select X86_DEV_DMA_OPS
 
 ### Arch settings
 config X86
@@ -327,6 +328,7 @@ config X86_EXTENDED_PLATFORM
 		NUMAQ (IBM/Sequent)
 		RDC R-321x SoC
 		SGI 320/540 (Visual Workstation)
+		STA2X11-based (e.g. Northville)
 		Summit/EXA (IBM x440)
 		Unisys ES7000 IA32 series
 		Moorestown MID devices
@@ -373,6 +375,7 @@ config X86_VSMP
 	select PARAVIRT
 	depends on X86_64 && PCI
 	depends on X86_EXTENDED_PLATFORM
+	depends on SMP
 	---help---
 	  Support for ScaleMP vSMP systems.  Say 'Y' here if this kernel is
 	  supposed to run on these EM64T-based machines.  Only choose this option
@@ -459,10 +462,10 @@ config X86_32_NON_STANDARD
 	depends on X86_32 && SMP
 	depends on X86_EXTENDED_PLATFORM
 	---help---
-	  This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
-	  subarchitectures.  It is intended for a generic binary kernel.
-	  if you select them all, kernel will probe it one by one. and will
-	  fallback to default.
+	  This option compiles in the NUMAQ, Summit, bigsmp, ES7000,
+	  STA2X11, default subarchitectures.  It is intended for a generic
+	  binary kernel. If you select them all, kernel will probe it
+	  one by one and will fallback to default.
 
 # Alphabetically sorted list of Non standard 32 bit platforms
 
@@ -502,6 +505,22 @@ config X86_VISWS
 	  A kernel compiled for the Visual Workstation will run on general
 	  PCs as well. See <file:Documentation/sgi-visws.txt> for details.
 
+config STA2X11
+	bool "STA2X11 Companion Chip Support"
+	depends on X86_32_NON_STANDARD && PCI
+	select X86_DEV_DMA_OPS
+	select X86_DMA_REMAP
+	select SWIOTLB
+	select MFD_STA2X11
+	select ARCH_REQUIRE_GPIOLIB
+	default n
+	---help---
+	  This adds support for boards based on the STA2X11 IO-Hub,
+	  a.k.a. "ConneXt". The chip is used in place of the standard
+	  PC chipset, so all "standard" peripherals are missing. If this
+	  option is selected the kernel will still be able to boot on
+	  standard PC machines.
+
 config X86_SUMMIT
 	bool "Summit/EXA (IBM x440)"
 	depends on X86_32_NON_STANDARD
@@ -2210,6 +2229,14 @@ config HAVE_TEXT_POKE_SMP
 	bool
 	select STOP_MACHINE if SMP
 
+config X86_DEV_DMA_OPS
+	bool
+	depends on X86_64 || STA2X11
+
+config X86_DMA_REMAP
+	bool
+	depends on STA2X11
+
 source "net/Kconfig"
 
 source "drivers/Kconfig"

arch/x86/boot/main.c

@@ -57,14 +57,20 @@ static void copy_boot_params(void)
 }
 
 /*
- * Set the keyboard repeat rate to maximum.  Unclear why this
+ * Query the keyboard lock status as given by the BIOS, and
+ * set the keyboard repeat rate to maximum.  Unclear why the latter
  * is done here; this might be possible to kill off as stale code.
  */
-static void keyboard_set_repeat(void)
+static void keyboard_init(void)
 {
-	struct biosregs ireg;
+	struct biosregs ireg, oreg;
 	initregs(&ireg);
-	ireg.ax = 0x0305;
+
+	ireg.ah = 0x02;		/* Get keyboard status */
+	intcall(0x16, &ireg, &oreg);
+	boot_params.kbd_status = oreg.al;
+
+	ireg.ax = 0x0305;	/* Set keyboard repeat rate */
 	intcall(0x16, &ireg, NULL);
 }
 
@@ -151,8 +157,8 @@ void main(void)
 	/* Detect memory layout */
 	detect_memory();
 
-	/* Set keyboard repeat rate (why?) */
-	keyboard_set_repeat();
+	/* Set keyboard repeat rate (why?) and query the lock flags */
+	keyboard_init();
 
 	/* Query MCA information */
 	query_mca();

arch/x86/include/asm/bootparam.h

@@ -112,7 +112,8 @@ struct boot_params {
 	__u8  e820_entries;				/* 0x1e8 */
 	__u8  eddbuf_entries;				/* 0x1e9 */
 	__u8  edd_mbr_sig_buf_entries;			/* 0x1ea */
-	__u8  _pad6[6];					/* 0x1eb */
+	__u8  kbd_status;				/* 0x1eb */
+	__u8  _pad6[5];					/* 0x1ec */
 	struct setup_header hdr;    /* setup header */	/* 0x1f1 */
 	__u8  _pad7[0x290-0x1f1-sizeof(struct setup_header)];
 	__u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX];	/* 0x290 */

arch/x86/include/asm/device.h

@@ -5,8 +5,8 @@ struct dev_archdata {
 #ifdef CONFIG_ACPI
 	void	*acpi_handle;
 #endif
-#ifdef CONFIG_X86_64
-struct dma_map_ops *dma_ops;
+#ifdef CONFIG_X86_DEV_DMA_OPS
+	struct dma_map_ops *dma_ops;
 #endif
 #if defined(CONFIG_INTEL_IOMMU) || defined(CONFIG_AMD_IOMMU)
 	void *iommu; /* hook for IOMMU specific extension */

arch/x86/include/asm/dma-mapping.h

@@ -30,7 +30,7 @@ extern struct dma_map_ops *dma_ops;
 
 static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
-#ifdef CONFIG_X86_32
+#ifndef CONFIG_X86_DEV_DMA_OPS
 	return dma_ops;
 #else
 	if (unlikely(!dev) || !dev->archdata.dma_ops)
@@ -62,6 +62,12 @@ extern void *dma_generic_alloc_coherent(struct device *dev, size_t size,
 					dma_addr_t *dma_addr, gfp_t flag,
 					struct dma_attrs *attrs);
 
+#ifdef CONFIG_X86_DMA_REMAP /* Platform code defines bridge-specific code */
+extern bool dma_capable(struct device *dev, dma_addr_t addr, size_t size);
+extern dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr);
+extern phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr);
+#else
+
 static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 {
 	if (!dev->dma_mask)
@@ -79,6 +85,7 @@ static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
 {
 	return daddr;
 }
+#endif /* CONFIG_X86_DMA_REMAP */
 
 static inline void
 dma_cache_sync(struct device *dev, void *vaddr, size_t size,

arch/x86/include/asm/kbdleds.h

+#ifndef _ASM_X86_KBDLEDS_H
+#define _ASM_X86_KBDLEDS_H
+
+/*
+ * Some laptops take the 789uiojklm,. keys as number pad when NumLock is on.
+ * This seems a good reason to start with NumLock off. That's why on X86 we
+ * ask the bios for the correct state.
+ */
+
+#include <asm/setup.h>
+
+static inline int kbd_defleds(void)
+{
+	return boot_params.kbd_status & 0x20 ? (1 << VC_NUMLOCK) : 0;
+}
+
+#endif /* _ASM_X86_KBDLEDS_H */

arch/x86/kernel/vsmp_64.c

@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/pci_ids.h>
 #include <linux/pci_regs.h>
+#include <linux/smp.h>
 
 #include <asm/apic.h>
 #include <asm/pci-direct.h>
@@ -22,6 +23,8 @@
 #include <asm/paravirt.h>
 #include <asm/setup.h>
 
+#define TOPOLOGY_REGISTER_OFFSET 0x10
+
 #if defined CONFIG_PCI && defined CONFIG_PARAVIRT
 /*
  * Interrupt control on vSMPowered systems:
@@ -149,12 +152,49 @@ int is_vsmp_box(void)
 	return 0;
 }
 #endif
+
+static void __init vsmp_cap_cpus(void)
+{
+#if !defined(CONFIG_X86_VSMP) && defined(CONFIG_SMP)
+	void __iomem *address;
+	unsigned int cfg, topology, node_shift, maxcpus;
+
+	/*
+	 * CONFIG_X86_VSMP is not configured, so limit the number CPUs to the
+	 * ones present in the first board, unless explicitly overridden by
+	 * setup_max_cpus
+	 */
+	if (setup_max_cpus != NR_CPUS)
+		return;
+
+	/* Read the vSMP Foundation topology register */
+	cfg = read_pci_config(0, 0x1f, 0, PCI_BASE_ADDRESS_0);
+	address = early_ioremap(cfg + TOPOLOGY_REGISTER_OFFSET, 4);
+	if (WARN_ON(!address))
+		return;
+
+	topology = readl(address);
+	node_shift = (topology >> 16) & 0x7;
+	if (!node_shift)
+		/* The value 0 should be decoded as 8 */
+		node_shift = 8;
+	maxcpus = (topology & ((1 << node_shift) - 1)) + 1;
+
+	pr_info("vSMP CTL: Capping CPUs to %d (CONFIG_X86_VSMP is unset)\n",
+		maxcpus);
+	setup_max_cpus = maxcpus;
+	early_iounmap(address, 4);
+#endif
+}
+
 void __init vsmp_init(void)
 {
 	detect_vsmp_box();
 	if (!is_vsmp_box())
 		return;
 
+	vsmp_cap_cpus();
+
 	set_vsmp_pv_ops();
 	return;
 }

arch/x86/pci/Makefile

@@ -11,6 +11,8 @@ obj-$(CONFIG_X86_INTEL_CE)      += ce4100.o
 obj-$(CONFIG_ACPI)		+= acpi.o
 obj-y				+= legacy.o irq.o
 
+obj-$(CONFIG_STA2X11)           += sta2x11-fixup.o
+
 obj-$(CONFIG_X86_VISWS)		+= visws.o
 
 obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o

arch/x86/platform/olpc/olpc-xo1-sci.c

@@ -18,6 +18,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
+#include <linux/pm_wakeup.h>
 #include <linux/mfd/core.h>
 #include <linux/power_supply.h>
 #include <linux/suspend.h>
@@ -83,8 +84,12 @@ static void send_ebook_state(void)
 		return;
 	}
 
+	if (!!test_bit(SW_TABLET_MODE, ebook_switch_idev->sw) == state)
+		return; /* Nothing new to report. */
+
 	input_report_switch(ebook_switch_idev, SW_TABLET_MODE, state);
 	input_sync(ebook_switch_idev);
+	pm_wakeup_event(&ebook_switch_idev->dev, 0);
 }
 
 static void flip_lid_inverter(void)
@@ -123,8 +128,12 @@ static void detect_lid_state(void)
 /* Report current lid switch state through input layer */
 static void send_lid_state(void)
 {
+	if (!!test_bit(SW_LID, lid_switch_idev->sw) == !lid_open)
+		return; /* Nothing new to report. */
+
 	input_report_switch(lid_switch_idev, SW_LID, !lid_open);
 	input_sync(lid_switch_idev);
+	pm_wakeup_event(&lid_switch_idev->dev, 0);
 }
 
 static ssize_t lid_wake_mode_show(struct device *dev,
@@ -213,11 +222,30 @@ static irqreturn_t xo1_sci_intr(int irq, void *dev_id)
 
 	dev_dbg(&pdev->dev, "sts %x gpe %x\n", sts, gpe);
 
-	if (sts & CS5536_PWRBTN_FLAG && !(sts & CS5536_WAK_FLAG)) {
-		input_report_key(power_button_idev, KEY_POWER, 1);
-		input_sync(power_button_idev);
-		input_report_key(power_button_idev, KEY_POWER, 0);
-		input_sync(power_button_idev);
+	if (sts & CS5536_PWRBTN_FLAG) {
+		if (!(sts & CS5536_WAK_FLAG)) {
+			/* Only report power button input when it was pressed
+			 * during regular operation (as opposed to when it
+			 * was used to wake the system). */
+			input_report_key(power_button_idev, KEY_POWER, 1);
+			input_sync(power_button_idev);
+			input_report_key(power_button_idev, KEY_POWER, 0);
+			input_sync(power_button_idev);
+		}
+		/* Report the wakeup event in all cases. */
+		pm_wakeup_event(&power_button_idev->dev, 0);
+	}
+
+	if ((sts & (CS5536_RTC_FLAG | CS5536_WAK_FLAG)) ==
+			(CS5536_RTC_FLAG | CS5536_WAK_FLAG)) {
+		/* When the system is woken by the RTC alarm, report the
+		 * event on the rtc device. */
+		struct device *rtc = bus_find_device_by_name(
+			&platform_bus_type, NULL, "rtc_cmos");
+		if (rtc) {
+			pm_wakeup_event(rtc, 0);
+			put_device(rtc);
+		}
 	}
 
 	if (gpe & CS5536_GPIOM7_PME_FLAG) { /* EC GPIO */
@@ -310,9 +338,10 @@ static int __devinit setup_sci_interrupt(struct platform_device *pdev)
 		outb(lo, CS5536_PIC_INT_SEL2);
 	}
 
-	/* Enable SCI from power button, and clear pending interrupts */
+	/* Enable interesting SCI events, and clear pending interrupts */
 	sts = inl(acpi_base + CS5536_PM1_STS);
-	outl((CS5536_PM_PWRBTN << 16) | 0xffff, acpi_base + CS5536_PM1_STS);
+	outl(((CS5536_PM_PWRBTN | CS5536_PM_RTC) << 16) | 0xffff,
+	     acpi_base + CS5536_PM1_STS);
 
 	r = request_irq(sci_irq, xo1_sci_intr, 0, DRV_NAME, pdev);
 	if (r)

drivers/tty/vt/keyboard.c

@@ -53,17 +53,13 @@ extern void ctrl_alt_del(void);
 
 #define KBD_DEFMODE ((1 << VC_REPEAT) | (1 << VC_META))
 
-/*
- * Some laptops take the 789uiojklm,. keys as number pad when NumLock is on.
- * This seems a good reason to start with NumLock off. On HIL keyboards
- * of PARISC machines however there is no NumLock key and everyone expects the
- * keypad to be used for numbers.
- */
-
-#if defined(CONFIG_PARISC) && (defined(CONFIG_KEYBOARD_HIL) || defined(CONFIG_KEYBOARD_HIL_OLD))
-#define KBD_DEFLEDS (1 << VC_NUMLOCK)
+#if defined(CONFIG_X86) || defined(CONFIG_PARISC)
+#include <asm/kbdleds.h>
 #else
-#define KBD_DEFLEDS 0
+static inline int kbd_defleds(void)
+{
+	return 0;
+}
 #endif
 
 #define KBD_DEFLOCK 0
@@ -1524,8 +1520,8 @@ int __init kbd_init(void)
 	int error;
 
 	for (i = 0; i < MAX_NR_CONSOLES; i++) {
-		kbd_table[i].ledflagstate = KBD_DEFLEDS;
-		kbd_table[i].default_ledflagstate = KBD_DEFLEDS;
+		kbd_table[i].ledflagstate = kbd_defleds();
+		kbd_table[i].default_ledflagstate = kbd_defleds();
 		kbd_table[i].ledmode = LED_SHOW_FLAGS;
 		kbd_table[i].lockstate = KBD_DEFLOCK;
 		kbd_table[i].slockstate = 0;

include/linux/cs5535.h

@@ -95,6 +95,7 @@ static inline int cs5535_pic_unreqz_select_high(unsigned int group,
 
 /* CS5536_PM1_STS bits */
 #define CS5536_WAK_FLAG		(1 << 15)
+#define CS5536_RTC_FLAG		(1 << 10)
 #define CS5536_PWRBTN_FLAG	(1 << 8)
 
 /* CS5536_PM1_EN bits */