Commit 44ccb64f authored by Boris Brezillon's avatar Boris Brezillon

mtd: nand: pxa3xx: rely on generic DT parsing done in nand_scan_ident()

The core now takes care of parsing generic DT properties in
nand_scan_ident() when nand_set_flash_node() has been called.
Rely on this initialization instead of calling of_get_nand_xxx()
manually.
Signed-off-by: default avatarBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: default avatarEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
parent 4f3cab9b
......@@ -29,7 +29,6 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_mtd.h>
#include <linux/platform_data/mtd-nand-pxa3xx.h>
#define CHIP_DELAY_TIMEOUT msecs_to_jiffies(200)
......@@ -1651,6 +1650,12 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
nand_writel(info, NDECCCTRL, 0x0);
if (pdata->flash_bbt)
chip->bbt_options |= NAND_BBT_USE_FLASH;
chip->ecc.strength = pdata->ecc_strength;
chip->ecc.size = pdata->ecc_step_size;
if (nand_scan_ident(mtd, 1, NULL))
return -ENODEV;
......@@ -1663,13 +1668,12 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
}
}
if (pdata->flash_bbt) {
if (chip->bbt_options & NAND_BBT_USE_FLASH) {
/*
* We'll use a bad block table stored in-flash and don't
* allow writing the bad block marker to the flash.
*/
chip->bbt_options |= NAND_BBT_USE_FLASH |
NAND_BBT_NO_OOB_BBM;
chip->bbt_options |= NAND_BBT_NO_OOB_BBM;
chip->bbt_td = &bbt_main_descr;
chip->bbt_md = &bbt_mirror_descr;
}
......@@ -1689,10 +1693,9 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
}
}
if (pdata->ecc_strength && pdata->ecc_step_size) {
ecc_strength = pdata->ecc_strength;
ecc_step = pdata->ecc_step_size;
} else {
ecc_strength = chip->ecc.strength;
ecc_step = chip->ecc.size;
if (!ecc_strength || !ecc_step) {
ecc_strength = chip->ecc_strength_ds;
ecc_step = chip->ecc_step_ds;
}
......@@ -1903,15 +1906,6 @@ static int pxa3xx_nand_probe_dt(struct platform_device *pdev)
if (of_get_property(np, "marvell,nand-keep-config", NULL))
pdata->keep_config = 1;
of_property_read_u32(np, "num-cs", &pdata->num_cs);
pdata->flash_bbt = of_get_nand_on_flash_bbt(np);
pdata->ecc_strength = of_get_nand_ecc_strength(np);
if (pdata->ecc_strength < 0)
pdata->ecc_strength = 0;
pdata->ecc_step_size = of_get_nand_ecc_step_size(np);
if (pdata->ecc_step_size < 0)
pdata->ecc_step_size = 0;
pdev->dev.platform_data = pdata;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment