drm/bridge: Use recommened kerneldoc for struct member refs

I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).

Also some minor drive-by polish where it makes sense, I read a lot
of docs ...

Cc: Archit Taneja <architt@codeaurora.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
[danvet: Remove spurious hunk that Archit spotted.]
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-13-git-send-email-daniel.vetter@ffwll.ch

drivers/gpu/drm/drm_bridge.c

@@ -55,7 +55,7 @@
  * just provide additional hooks to get the desired output at the end of the
  * encoder chain.
  *
- * Bridges can also be chained up using the next pointer in &struct drm_bridge.
+ * Bridges can also be chained up using the &drm_bridge.next pointer.
  *
  * Both legacy CRTC helpers and the new atomic modeset helpers support bridges.
  */
@@ -179,7 +179,7 @@ void drm_bridge_detach(struct drm_bridge *bridge)
  * @mode: desired mode to be set for the bridge
  * @adjusted_mode: updated mode that works for this bridge
  *
- * Calls ->mode_fixup() &drm_bridge_funcs op for all the bridges in the
+ * Calls &drm_bridge_funcs.mode_fixup for all the bridges in the
  * encoder chain, starting from the first bridge to the last.
  *
  * Note: the bridge passed should be the one closest to the encoder
@@ -206,11 +206,10 @@ bool drm_bridge_mode_fixup(struct drm_bridge *bridge,
 EXPORT_SYMBOL(drm_bridge_mode_fixup);
 
 /**
- * drm_bridge_disable - calls ->disable() &drm_bridge_funcs op for all
- *			bridges in the encoder chain.
+ * drm_bridge_disable - disables all bridges in the encoder chain
  * @bridge: bridge control structure
  *
- * Calls ->disable() &drm_bridge_funcs op for all the bridges in the encoder
+ * Calls &drm_bridge_funcs.disable op for all the bridges in the encoder
  * chain, starting from the last bridge to the first. These are called before
  * calling the encoder's prepare op.
  *
@@ -229,11 +228,10 @@ void drm_bridge_disable(struct drm_bridge *bridge)
 EXPORT_SYMBOL(drm_bridge_disable);
 
 /**
- * drm_bridge_post_disable - calls ->post_disable() &drm_bridge_funcs op for
- *			     all bridges in the encoder chain.
+ * drm_bridge_post_disable - cleans up after disabling all bridges in the encoder chain
  * @bridge: bridge control structure
  *
- * Calls ->post_disable() &drm_bridge_funcs op for all the bridges in the
+ * Calls &drm_bridge_funcs.post_disable op for all the bridges in the
  * encoder chain, starting from the first bridge to the last. These are called
  * after completing the encoder's prepare op.
  *
@@ -258,7 +256,7 @@ EXPORT_SYMBOL(drm_bridge_post_disable);
  * @mode: desired mode to be set for the bridge
  * @adjusted_mode: updated mode that works for this bridge
  *
- * Calls ->mode_set() &drm_bridge_funcs op for all the bridges in the
+ * Calls &drm_bridge_funcs.mode_set op for all the bridges in the
  * encoder chain, starting from the first bridge to the last.
  *
  * Note: the bridge passed should be the one closest to the encoder
@@ -278,11 +276,11 @@ void drm_bridge_mode_set(struct drm_bridge *bridge,
 EXPORT_SYMBOL(drm_bridge_mode_set);
 
 /**
- * drm_bridge_pre_enable - calls ->pre_enable() &drm_bridge_funcs op for all
- *			   bridges in the encoder chain.
+ * drm_bridge_pre_enable - prepares for enabling all
+ *			   bridges in the encoder chain
  * @bridge: bridge control structure
  *
- * Calls ->pre_enable() &drm_bridge_funcs op for all the bridges in the encoder
+ * Calls &drm_bridge_funcs.pre_enable op for all the bridges in the encoder
  * chain, starting from the last bridge to the first. These are called
  * before calling the encoder's commit op.
  *
@@ -301,11 +299,10 @@ void drm_bridge_pre_enable(struct drm_bridge *bridge)
 EXPORT_SYMBOL(drm_bridge_pre_enable);
 
 /**
- * drm_bridge_enable - calls ->enable() &drm_bridge_funcs op for all bridges
- *		       in the encoder chain.
+ * drm_bridge_enable - enables all bridges in the encoder chain
  * @bridge: bridge control structure
  *
- * Calls ->enable() &drm_bridge_funcs op for all the bridges in the encoder
+ * Calls &drm_bridge_funcs.enable op for all the bridges in the encoder
  * chain, starting from the first bridge to the last. These are called
  * after completing the encoder's commit op.
  *

include/drm/drm_bridge.h

@@ -96,9 +96,10 @@ struct drm_bridge_funcs {
 	 * This callback should disable the bridge. It is called right before
 	 * the preceding element in the display pipe is disabled. If the
 	 * preceding element is a bridge this means it's called before that
-	 * bridge's ->disable() function. If the preceding element is a
-	 * &drm_encoder it's called right before the encoder's ->disable(),
-	 * ->prepare() or ->dpms() hook from &struct drm_encoder_helper_funcs.
+	 * bridge's @disable vfunc. If the preceding element is a &drm_encoder
+	 * it's called right before the &drm_encoder_helper_funcs.disable,
+	 * &drm_encoder_helper_funcs.prepare or &drm_encoder_helper_funcs.dpms
+	 * hook.
 	 *
 	 * The bridge can assume that the display pipe (i.e. clocks and timing
 	 * signals) feeding it is still running when this callback is called.
@@ -110,12 +111,13 @@ struct drm_bridge_funcs {
 	/**
 	 * @post_disable:
 	 *
-	 * This callback should disable the bridge. It is called right after
-	 * the preceding element in the display pipe is disabled. If the
-	 * preceding element is a bridge this means it's called after that
-	 * bridge's ->post_disable() function. If the preceding element is a
-	 * &drm_encoder it's called right after the encoder's ->disable(),
-	 * ->prepare() or ->dpms() hook from &struct drm_encoder_helper_funcs.
+	 * This callback should disable the bridge. It is called right after the
+	 * preceding element in the display pipe is disabled. If the preceding
+	 * element is a bridge this means it's called after that bridge's
+	 * @post_disable function. If the preceding element is a &drm_encoder
+	 * it's called right after the encoder's
+	 * &drm_encoder_helper_funcs.disable, &drm_encoder_helper_funcs.prepare
+	 * or &drm_encoder_helper_funcs.dpms hook.
 	 *
 	 * The bridge must assume that the display pipe (i.e. clocks and timing
 	 * singals) feeding it is no longer running when this callback is
@@ -129,9 +131,11 @@ struct drm_bridge_funcs {
 	 * @mode_set:
 	 *
 	 * This callback should set the given mode on the bridge. It is called
-	 * after the ->mode_set() callback for the preceding element in the
-	 * display pipeline has been called already. The display pipe (i.e.
-	 * clocks and timing signals) is off when this function is called.
+	 * after the @mode_set callback for the preceding element in the display
+	 * pipeline has been called already. If the bridge is the first element
+	 * then this would be &drm_encoder_helper_funcs.mode_set. The display
+	 * pipe (i.e.  clocks and timing signals) is off when this function is
+	 * called.
 	 */
 	void (*mode_set)(struct drm_bridge *bridge,
 			 struct drm_display_mode *mode,
@@ -142,9 +146,10 @@ struct drm_bridge_funcs {
 	 * This callback should enable the bridge. It is called right before
 	 * the preceding element in the display pipe is enabled. If the
 	 * preceding element is a bridge this means it's called before that
-	 * bridge's ->pre_enable() function. If the preceding element is a
-	 * &drm_encoder it's called right before the encoder's ->enable(),
-	 * ->commit() or ->dpms() hook from &struct drm_encoder_helper_funcs.
+	 * bridge's @pre_enable function. If the preceding element is a
+	 * &drm_encoder it's called right before the encoder's
+	 * &drm_encoder_helper_funcs.enable, &drm_encoder_helper_funcs.commit or
+	 * &drm_encoder_helper_funcs.dpms hook.
 	 *
 	 * The display pipe (i.e. clocks and timing signals) feeding this bridge
 	 * will not yet be running when this callback is called. The bridge must
@@ -161,9 +166,10 @@ struct drm_bridge_funcs {
 	 * This callback should enable the bridge. It is called right after
 	 * the preceding element in the display pipe is enabled. If the
 	 * preceding element is a bridge this means it's called after that
-	 * bridge's ->enable() function. If the preceding element is a
-	 * &drm_encoder it's called right after the encoder's ->enable(),
-	 * ->commit() or ->dpms() hook from &struct drm_encoder_helper_funcs.
+	 * bridge's @enable function. If the preceding element is a
+	 * &drm_encoder it's called right after the encoder's
+	 * &drm_encoder_helper_funcs.enable, &drm_encoder_helper_funcs.commit or
+	 * &drm_encoder_helper_funcs.dpms hook.
 	 *
 	 * The bridge can assume that the display pipe (i.e. clocks and timing
 	 * signals) feeding it is running when this callback is called. This