Commit 45a4a16c authored by Ido Schimmel's avatar Ido Schimmel Committed by David S. Miller

mlxsw: spectrum: Default ports to non-virtual mode

In virtual mode, packets are classified to FIDs based on their ingress
port and VLAN whereas in non-virtual mode only the VLAN is taken into
account.

Currently ports are initialized to use virtual mode due to the presence
of the PVID vPort. However, we're going to transition ports between both
modes based on the FIDs they use and not merely based on the presence on
a VLAN upper. Therefore, during initialization, no mode will be
explicitly set.

Since the Programmer's Reference Manual (PRM) doesn't specify a default,
explicitly set the port to non-virtual mode and later transition the
port between both modes based on the FIDs it uses.

In a follow-up patchset, this step will be moved to the common FID core
where it logically belongs.
Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
Signed-off-by: default avatarJiri Pirko <jiri@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent b02eae9b
......@@ -2619,6 +2619,13 @@ static int __mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
goto err_port_dcb_init;
}
err = mlxsw_sp_port_vp_mode_set(mlxsw_sp_port, false);
if (err) {
dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to set non-virtual mode\n",
mlxsw_sp_port->local_port);
goto err_port_vp_mode_set;
}
err = mlxsw_sp_port_pvid_vport_create(mlxsw_sp_port);
if (err) {
dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to create PVID vPort\n",
......@@ -2646,6 +2653,7 @@ static int __mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
mlxsw_sp_port_switchdev_fini(mlxsw_sp_port);
mlxsw_sp_port_pvid_vport_destroy(mlxsw_sp_port);
err_port_pvid_vport_create:
err_port_vp_mode_set:
mlxsw_sp_port_dcb_fini(mlxsw_sp_port);
err_port_dcb_init:
err_port_ets_init:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment