[media] tvp5150: Add s_stream subdev operation support

This patch adds the .s_stream subdev operation to the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/i2c/tvp5150.c

@@ -952,6 +952,21 @@ static int tvp5150_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
 			I2C Command
  ****************************************************************************/
 
+static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	/* Initializes TVP5150 to its default values */
+	/* # set PCLK (27MHz) */
+	tvp5150_write(sd, TVP5150_CONF_SHARED_PIN, 0x00);
+
+	/* Output format: 8-bit ITU-R BT.656 with embedded syncs */
+	if (enable)
+		tvp5150_write(sd, TVP5150_MISC_CTL, 0x09);
+	else
+		tvp5150_write(sd, TVP5150_MISC_CTL, 0x00);
+
+	return 0;
+}
+
 static int tvp5150_s_routing(struct v4l2_subdev *sd,
 			     u32 input, u32 output, u32 config)
 {
@@ -1073,6 +1088,7 @@ static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {
 
 static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
 	.s_std = tvp5150_s_std,
+	.s_stream = tvp5150_s_stream,
 	.s_routing = tvp5150_s_routing,
 	.s_crop = tvp5150_s_crop,
 	.g_crop = tvp5150_g_crop,