Commit 46124528 authored by Kai Germaschewski's avatar Kai Germaschewski

kbuild: Remove export-objs := ... statements

One of the goals of the whole new modversions implementation:
export-objs is gone for good!
parent 03e7dcfb
......@@ -6,8 +6,6 @@ EXTRA_TARGETS := head.o
EXTRA_AFLAGS := $(CFLAGS)
export-objs := alpha_ksyms.o core_marvel.o core_titan.o
obj-y := entry.o traps.o process.o init_task.o osf_sys.o irq.o \
irq_alpha.o signal.o setup.o ptrace.o time.o semaphore.o \
alpha_ksyms.o systbls.o err_common.o
......
......@@ -2,8 +2,6 @@
# Makefile for the linux kernel.
#
export-objs := sa1111.o sa1111-pcibuf.o sa1111-pcipool.o
obj-$(CONFIG_SA1111) += sa1111.o sa1111-pcibuf.o sa1111-pcipool.o
obj-$(CONFIG_PCI_HOST_PLX90X0) += plx90x0.o
......
......@@ -15,8 +15,6 @@ obj-m :=
obj-n :=
obj- :=
export-objs := armksyms.o apm.o dma.o ecard.o fiq.o io.o time.o
obj-$(CONFIG_APM) += apm.o
obj-$(CONFIG_ARCH_ACORN) += ecard.o time-acorn.o
obj-$(CONFIG_ARCH_CLPS7500) += time-acorn.o
......
......@@ -9,4 +9,3 @@ obj-m :=
obj-n :=
obj- :=
export-objs :=
......@@ -9,4 +9,3 @@ obj-m :=
obj-n :=
obj- :=
export-objs :=
......@@ -10,8 +10,6 @@ obj-m :=
obj-n :=
obj- :=
export-objs := oldlatches.o
obj-$(CONFIG_DEBUG_LL) += debug.o
EXTRA_TARGETS := head.o
......
......@@ -9,4 +9,3 @@ obj-m :=
obj-n :=
obj- :=
export-objs :=
......@@ -9,6 +9,4 @@ obj-m :=
obj-n :=
obj- :=
export-objs := io.o
obj-$(CONFIG_LEDS) += leds.o
......@@ -9,4 +9,3 @@ obj-m :=
obj-n :=
obj- :=
export-objs :=
......@@ -9,8 +9,6 @@ obj-m :=
obj-n :=
obj- :=
export-objs := arch.o netwinder-hw.o
pci-$(CONFIG_ARCH_CATS) += cats-pci.o
pci-$(CONFIG_ARCH_EBSA285) += ebsa285-pci.o
pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
......
......@@ -9,7 +9,5 @@ obj-m :=
obj-n :=
obj- :=
export-objs :=
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_LEDS) += leds.o
......@@ -10,8 +10,6 @@ obj-m :=
obj-n :=
obj- :=
export-objs :=
obj-$(CONFIG_ARCH_IQ80310) += iq80310-pci.o iq80310-irq.o
ifneq ($(CONFIG_XSCALE_PMU_TIMER),y)
......
......@@ -9,4 +9,3 @@ obj-m :=
obj-n :=
obj- :=
export-objs :=
......@@ -2,8 +2,6 @@
# Makefile for the linux kernel.
#
export-objs := generic.o irq.o dma.o sa1111.o
# Common support (must be linked before board specific support)
obj-y += generic.o irq.o dma.o
obj-$(CONFIG_SA1111) += sa1111.o
......
......@@ -9,4 +9,3 @@ obj-m :=
obj-n :=
obj- :=
export-objs :=
......@@ -9,8 +9,6 @@ obj-n :=
obj- :=
led-y := leds.o
export-objs := dma.o generic.o pm.o
# This needs to be cleaned up. We probably need to have SA1100
# and SA1110 config symbols.
ifeq ($(CONFIG_CPU_FREQ),y)
......@@ -26,12 +24,10 @@ obj-$(CONFIG_SA1100_ADSBITSY) += adsbitsy.o
led-$(CONFIG_SA1100_ADSBITSY) += leds-adsbitsy.o
obj-$(CONFIG_SA1100_ASSABET) += assabet.o
export-objs += assabet.o
led-$(CONFIG_SA1100_ASSABET) += leds-assabet.o
obj-$(CONFIG_ASSABET_NEPONSET) += neponset.o
obj-$(CONFIG_SA1100_BADGE4) += badge4.o
export-objs += badge4.o
led-$(CONFIG_SA1100_BADGE4) += leds-badge4.o
obj-$(CONFIG_SA1100_BRUTUS) += brutus.o
......@@ -43,12 +39,9 @@ led-$(CONFIG_SA1100_CERF) += leds-cerf.o
obj-$(CONFIG_SA1100_EMPEG) += empeg.o
obj-$(CONFIG_SA1100_FLEXANET) += flexanet.o
export-objs += flexanet.o
led-$(CONFIG_SA1100_FLEXANET) += leds-flexanet.o
obj-$(CONFIG_SA1100_FREEBIRD) += freebird.o
export-objs += freebird.o
obj-$(CONFIG_SA1100_GRAPHICSCLIENT) += graphicsclient.o
led-$(CONFIG_SA1100_GRAPHICSCLIENT) += leds-graphicsclient.o
......@@ -56,13 +49,11 @@ obj-$(CONFIG_SA1100_GRAPHICSMASTER) += graphicsmaster.o
led-$(CONFIG_SA1100_GRAPHICSMASTER) += leds-graphicsmaster.o
obj-$(CONFIG_SA1100_H3600) += h3600.o
export-objs += h3600.o
obj-$(CONFIG_SA1100_HACKKIT) += hackkit.o
led-$(CONFIG_SA1100_HACKKIT) += leds-hackkit.o
obj-$(CONFIG_SA1100_HUW_WEBPANEL) += huw_webpanel.o
export-objs += huw_webpanel.o
obj-$(CONFIG_SA1100_ITSY) += itsy.o
......@@ -93,15 +84,12 @@ obj-$(CONFIG_SA1100_SIMPAD) += simpad.o
led-$(CONFIG_SA1100_SIMPAD) += leds-simpad.o
obj-$(CONFIG_SA1100_STORK) += stork.o
export-objs += stork.o
obj-$(CONFIG_SA1100_TRIZEPS) += trizeps.o
export-objs += trizeps.o
obj-$(CONFIG_SA1100_XP860) += xp860.o
obj-$(CONFIG_SA1100_YOPY) += yopy.o
export-objs += yopy.o
# LEDs support
obj-$(CONFIG_LEDS) += $(led-y)
......
......@@ -9,6 +9,4 @@ obj-m :=
obj-n :=
obj- :=
export-objs :=
obj-$(CONFIG_LEDS) += leds.o
......@@ -9,4 +9,3 @@ obj-m :=
obj-n :=
obj- :=
export-objs :=
......@@ -8,8 +8,6 @@ obj-y := init.o extable.o fault-common.o
obj-m :=
obj-n :=
obj- :=
export-objs := proc-syms.o discontig.o
ifeq ($(CONFIG_CPU_32),y)
obj-y += consistent.o fault-armv.o ioremap.o mm-armv.o
obj-$(CONFIG_MODULES) += proc-syms.o
......
......@@ -5,8 +5,6 @@
EXTRA_TARGETS := head.o
export-objs := ksyms.o
obj-y := process.o signal.o entry.o traps.o irq.o \
ptrace.o setup.o time.o sys_cris.o shadows.o \
debugport.o semaphore.o
......
......@@ -4,8 +4,6 @@
EXTRA_TARGETS := head.o init_task.o
export-objs := mca.o i386_ksyms.o time.o
obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o vm86.o \
ptrace.o i8259.o ioport.o ldt.o setup.o time.o sys_i386.o \
pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o
......@@ -34,5 +32,4 @@ obj-y += sysenter.o
EXTRA_AFLAGS := -traditional
export-objs += scx200.o
obj-$(CONFIG_SCx200) += scx200.o
......@@ -3,4 +3,3 @@ obj-y += amd.o
obj-y += cyrix.o
obj-y += centaur.o
export-objs := main.o
......@@ -8,8 +8,6 @@
# Note 2! The CFLAGS definitions are now in the main makefile...
EXTRA_CFLAGS += -I../kernel
export-objs :=
obj-y := setup.o voyager_basic.o voyager_thread.o
obj-$(CONFIG_SMP) += voyager_smp.o voyager_cat.o
......@@ -2,8 +2,6 @@
# Makefile for the linux i386-specific parts of the memory manager.
#
export-objs := pageattr.o
obj-y := init.o pgtable.o fault.o ioremap.o extable.o pageattr.o
obj-$(CONFIG_DISCONTIGMEM) += discontig.o
......
......@@ -5,6 +5,4 @@
# Copyright (C) Alex Williamson (alex_williamson@hp.com)
#
export-objs := sba_iommu.o
obj-y := sba_iommu.o
......@@ -4,8 +4,6 @@
EXTRA_TARGETS := head.o init_task.o
export-objs := ia64_ksyms.o
obj-y := acpi.o entry.o gate.o efi.o efi_stub.o ia64_ksyms.o \
irq.o irq_ia64.o irq_lsapic.o ivt.o \
machvec.o pal.o process.o perfmon.o ptrace.o sal.o \
......
......@@ -4,8 +4,6 @@
L_TARGET = lib.a
export-objs := swiotlb.o
obj-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o \
__divdi3.o __udivdi3.o __moddi3.o __umoddi3.o \
checksum.o clear_page.o csum_partial_copy.o copy_page.o \
......
......@@ -13,8 +13,6 @@ ifdef CONFIG_IA64_SGI_SN2
EXTRA_CFLAGS += -DSHUB_SWAP_WAR
endif
export-objs := hcl.o pci_dma.o
obj-$(CONFIG_IA64_SGI_SN) += stubs.o sgi_if.o xswitch.o klgraph_hack.o \
hcl.o labelcl.o invent.o sgi_io_sim.o \
klgraph_hack.o hcl_util.o cdl.o hubdev.o hubspc.o \
......
......@@ -38,8 +38,6 @@ EXTRA_CFLAGS := -DLITTLE_ENDIAN
.S.o:
$(CC) $(AFLAGS) $(AFLAGS_KERNEL) -c -o $*.o $<
export-objs = sn_ksyms.o iomv.o
obj-y = probe.o setup.o sn_asm.o sv.o bte.o iomv.o
obj-$(CONFIG_IA64_SGI_SN1) += irq.o mca.o
obj-$(CONFIG_IA64_SGI_SN2) += irq.o mca.o
......
......@@ -2,8 +2,6 @@
# Makefile for Linux arch/m68k/amiga source directory
#
export-objs := amiga_ksyms.o
obj-y := config.o amiints.o cia.o chipram.o amisound.o amiga_ksyms.o
obj-$(CONFIG_AMIGA_PCMCIA) += pcmcia.o
......@@ -2,8 +2,6 @@
# Makefile for Linux arch/m68k/atari source directory
#
export-objs := atari_ksyms.o
obj-y := config.o time.o debug.o ataints.o stdma.o \
atasound.o stram.o atari_ksyms.o
......
......@@ -8,8 +8,6 @@ else
EXTRA_TARGETS := sun3-head.o
endif
export-objs := setup.o m68k_ksyms.o
obj-y := entry.o process.o traps.o ints.o signal.o ptrace.o \
sys_m68k.o time.o semaphore.o setup.o m68k_ksyms.o
......
......@@ -2,7 +2,5 @@
# Makefile for Linux arch/m68k/mac source directory
#
export-objs := mac_ksyms.o
obj-y := config.o bootparse.o macints.o iop.o via.o oss.o psc.o \
baboon.o macboing.o debug.o misc.o mac_ksyms.o
......@@ -2,6 +2,4 @@
# Makefile for Linux arch/m68k/mvme16x source directory
#
export-objs := mvme16x_ksyms.o
obj-y := config.o 16xints.o rtc.o mvme16x_ksyms.o
......@@ -2,8 +2,6 @@
# Makefile for Linux arch/m68k/sun3 source directory
#
export-objs := sun3_ksyms.o
obj-y := sun3_ksyms.o sun3ints.o sun3dvma.o sbus.o idprom.o
obj-$(CONFIG_SUN3) += config.o mmu_emu.o leds.o dvma.o \
......
......@@ -2,6 +2,4 @@
# Makefile for Linux arch/m68k/sun3x source directory
#
export-objs := sun3x_ksyms.o
obj-y := config.o time.o dvma.o prom.o
......@@ -2,8 +2,6 @@
# Makefile for arch/m68knommu/kernel.
#
export-objs := m68k_ksyms.o
obj-y += entry.o init_task.o ints.o m68k_ksyms.o process.o ptrace.o \
semaphore.o setup.o signal.o syscalltable.o sys_m68k.o time.o \
traps.o
......
......@@ -6,8 +6,6 @@
# Makefile for the Alchemy Au1000 CPU, generic files.
#
export-objs := serial.o
obj-y := prom.o dbg_io.o int-handler.o irq.o puts.o time.o reset.o
obj-$(CONFIG_AU1000_UART) += serial.o
......
......@@ -3,7 +3,6 @@
# under Linux.
#
export-objs := vacserial.o
obj-y := baget.o print.o setup.o time.o irq.o bagetIRQ.o \
reset.o wbflush.o
obj-$(CONFIG_SERIAL) += vacserial.o
......
......@@ -2,8 +2,6 @@
# Makefile for the DECstation family specific parts of the kernel
#
export-objs := wbflush.o
obj-y := int-handler.o setup.o irq.o time.o reset.o rtc-dec.o wbflush.o
obj-$(CONFIG_PROM_CONSOLE) += promcon.o
......@@ -5,8 +5,6 @@
# EXTRA_AFLAGS = -mips3 -mcpu=r4000 # not used?
EXTRA_TARGETS := head.o init_task.o
export-objs := mips_ksyms.o
obj-y += branch.o process.o signal.o entry.o \
traps.o ptrace.o vm86.o ioport.o reset.o \
semaphore.o setup.o syscall.o sysmips.o \
......
......@@ -2,7 +2,6 @@
# Makefile for the Linux/MIPS-specific parts of the memory manager.
#
export-objs += ioremap.o umap.o
obj-y += extable.o init.o ioremap.o fault.o loadmmu.o
obj-$(CONFIG_CPU_R3000) += r2300.o
......
......@@ -4,8 +4,6 @@
EXTRA_TARGETS := head.o init_task.o
export-objs := mips64_ksyms.o
obj-y := branch.o entry.o proc.o process.o ptrace.o r4k_cache.o r4k_fpu.o \
r4k_genex.o r4k_switch.o r4k_tlb.o r4k_tlb_debug.o r4k_tlb_glue.o \
scall_64.o semaphore.o setup.o signal.o softfp.o syscall.o \
......
......@@ -2,8 +2,6 @@
# Makefile for the Linux/MIPS-specific parts of the memory manager.
#
export-objs += umap.o
obj-y := extable.o init.o fault.o loadmmu.o
obj-$(CONFIG_CPU_R4300) += r4xx0.o
......
......@@ -9,8 +9,6 @@ EXTRA_TARGETS := init_task.o pdc_cons.o process.o unaligned.o $(head-y)
AFLAGS_entry.o := -traditional
AFLAGS_pacache.o := -traditional
export-objs := parisc_ksyms.o
obj-y := cache.o pacache.o setup.o traps.o time.o irq.o \
pa7300lc.o syscall.o entry.o sys_parisc.o firmware.o \
ptrace.o hardware.o inventory.o drivers.o semaphore.o \
......
......@@ -2,8 +2,6 @@
# Makefile for the linux MPC8xx ppc-specific parts of comm processor
#
export-objs := fec.o
obj-y := commproc.o uart.o
obj-$(CONFIG_FEC_ENET) += fec.o
......
......@@ -2,8 +2,6 @@
# Makefile for Linux arch/m68k/amiga source directory
#
export-objs := amiga_ksyms.o
obj-y := config.o amiints.o cia.o time.o bootinfo.o amisound.o \
chipram.o amiga_ksyms.o
......
......@@ -17,8 +17,6 @@ HEAD-$(CONFIG_6xx) += idle_6xx.o
EXTRA_TARGETS := $(HEAD-y)
export-objs := ppc_ksyms.o time.o
obj-y := entry.o traps.o irq.o idle.o time.o misc.o \
process.o signal.o ptrace.o align.o \
semaphore.o syscalls.o setup.o \
......
......@@ -2,8 +2,6 @@
# Makefile for ppc-specific library files..
#
export-objs := dec_and_lock.o
obj-y := checksum.o string.o strcase.o dec_and_lock.o div64.o
obj-$(CONFIG_SMP) += locks.o
......@@ -9,6 +9,5 @@
#
# NB: cribbed from the drivers/sbus/Makefile -- PMM
export-objs := ocp.o ocp-driver.o ocp-probe.o
obj-y += ocp.o ocp-driver.o ocp-probe.o
#
# Makefile for the PowerPC 4xx linux kernel.
export-objs := ibm405lp.o
obj-$(CONFIG_ASH) += ash.o
obj-$(CONFIG_BEECH) += beech.o
obj-$(CONFIG_CEDAR) += cedar.o
......
......@@ -12,8 +12,6 @@ endif
# Extra CFLAGS so we don't have to do relative includes
CFLAGS_pmac_setup.o += -I$(TOPDIR)/arch/$(ARCH)/mm
export-objs := prep_setup.o
obj-$(CONFIG_APUS) += apus_setup.o
ifeq ($(CONFIG_APUS),y)
obj-$(CONFIG_PCI) += apus_pci.o
......
......@@ -12,8 +12,6 @@ endif
CFLAGS_prom_init.o += -mrelocatable-lib
CFLAGS_btext.o += -mrelocatable-lib
export-objs := ppc4xx_dma.o ppc4xx_pm.o
obj-$(CONFIG_PPCBUG_NVRAM) += prep_nvram.o
ifeq ($(CONFIG_4xx),y)
obj-$(CONFIG_4xx) += ppc4xx_pic.o
......
......@@ -4,8 +4,6 @@
EXTRA_CFLAGS += -mno-minimal-toc
EXTRA_TARGETS := head.o
export-objs := ppc_ksyms.o
obj-y := setup.o entry.o traps.o irq.o idle.o \
time.o process.o signal.o syscalls.o misc.o ptrace.o \
align.o semaphore.o bitops.o stab.o htab.o pacaData.o \
......
......@@ -4,7 +4,5 @@
L_TARGET = lib.a
export-objs := dec_and_lock.o
obj-y := checksum.o dec_and_lock.o string.o strcase.o
obj-y += copypage.o memcpy.o copyuser.o
......@@ -5,7 +5,6 @@
EXTRA_TARGETS := head.o init_task.o
EXTRA_AFLAGS := -traditional
export-objs := debug.o ebcdic.o s390_ext.o smp.o s390_ksyms.o
obj-y := entry.o bitmap.o traps.o time.o process.o \
setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
semaphore.o reipl.o s390_ext.o debug.o
......
......@@ -5,9 +5,6 @@
EXTRA_TARGETS := head.o init_task.o
EXTRA_AFLAGS := -traditional
export-objs := debug.o ebcdic.o s390_ext.o smp.o s390_ksyms.o \
exec32.o
obj-y := entry.o bitmap.o traps.o time.o process.o \
setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
semaphore.o reipl.o s390_ext.o debug.o
......
......@@ -4,9 +4,6 @@
EXTRA_TARGETS := head.o init_task.o
export-objs := io.o io_generic.o io_hd64465.o setup_hd64465.o sh_ksyms.o \
io_adx.o io_bigsur.o io_cat68701.o hd64465_gpio.o
obj-y := process.o signal.o entry.o traps.o irq.o irq_ipr.o \
ptrace.o setup.o time.o sys_sh.o semaphore.o \
irq_imask.o io.o io_generic.o sh_ksyms.o
......
......@@ -6,7 +6,6 @@ EXTRA_TARGETS := head.o init_task.o
EXTRA_AFLAGS := -ansi
export-objs := sparc_ksyms.o
IRQ_OBJS := irq.o sun4m_irq.o sun4c_irq.o sun4d_irq.o
obj-y := entry.o wof.o wuf.o etrap.o rtrap.o traps.o $(IRQ_OBJS) \
process.o signal.o ioport.o setup.o idprom.o \
......
......@@ -6,7 +6,6 @@ EXTRA_AFLAGS := -ansi
EXTRA_TARGETS := head.o init_task.o
export-objs := sparc64_ksyms.o ebus.o
obj-y := process.o setup.o cpu.o idprom.o \
traps.o devices.o auxio.o \
irq.o ptrace.o time.o sys_sparc.o signal.o \
......
......@@ -20,8 +20,6 @@ ubd-objs := ubd_kern.o ubd_user.o
port-objs := port_kern.o port_user.o
harddog-objs := harddog_kern.o harddog_user.o
export-objs := mconsole_kern.o
obj-y =
obj-$(CONFIG_SSL) += ssl.o
obj-$(CONFIG_UML_NET_SLIP) += slip.o
......
......@@ -36,10 +36,6 @@ UNMAP_CFLAGS := $(patsubst -fprofile-arcs -ftest-coverage,,$(UNMAP_CFLAGS))
DMODULES-$(CONFIG_MODULES) = -D__CONFIG_MODULES__
DMODVERSIONS-$(CONFIG_MODVERSIONS) = -D__CONFIG_MODVERSIONS__
export-objs-$(CONFIG_GPROF) += gprof_syms.o
export-objs-$(CONFIG_GCOV) += gmon_syms.o
export-objs := ksyms.o process_kern.o signal_kern.o $(export-objs-y)
CFLAGS_user_syms.o = -D__AUTOCONF_INCLUDED__ $(DMODULES-y) $(DMODVERSIONS-y) \
-I/usr/include -I../include
......
......@@ -9,8 +9,6 @@ obj-y = exec_kern.o exec_user.o gdb.o gdb_kern.o ksyms.o mem.o process_kern.o \
obj-$(CONFIG_PT_PROXY) += ptproxy/
export-objs = ksyms.o
USER_OBJS := $(filter %_user.o,$(obj-y)) gdb.o time.o tracer.o
USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
......
......@@ -3,8 +3,6 @@ obj-y = bugs.o checksum.o extable.o fault.o ksyms.o ldt.o module.o \
obj-$(CONFIG_HIGHMEM) += highmem.o
export-objs = ksyms.o
USER_OBJS := bugs.o ptrace_user.o sigcontext.o fault.o
USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
......
......@@ -13,8 +13,6 @@ EXTRA_TARGETS := head.o init_task.o
obj-y += intv.o entry.o process.o syscalls.o time.o semaphore.o setup.o \
signal.o irq.o mach.o ptrace.o bug.o
export-objs += v850_ksyms.o rte_mb_a_pci.o
obj-$(CONFIG_MODULES) += module.o v850_ksyms.o
# chip-specific code
obj-$(CONFIG_V850E_MA1) += ma.o nb85e_utils.o nb85e_timer_d.o
......
......@@ -2,8 +2,6 @@
# Makefile for the ia32 kernel emulation subsystem.
#
export-objs := ia32_ioctl.o sys_ia32.o
obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_ioctl.o \
ia32_signal.o \
ia32_binfmt.o fpu32.o socket32.o ptrace32.o ipc32.o syscall32.o
......@@ -4,8 +4,6 @@
EXTRA_TARGETS := head.o head64.o init_task.o
EXTRA_AFLAGS := -traditional
export-objs := x8664_ksyms.o pci-gart.o pci-dma.o
obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o \
ptrace.o i8259.o ioport.o ldt.o setup.o time.o sys_x86_64.o \
pci-dma.o x8664_ksyms.o i387.o syscall.o vsyscall.o \
......
......@@ -7,8 +7,6 @@ obj-y += amd.o
obj-y += cyrix.o
obj-y += centaur.o
export-objs := main.o
$(obj)/main.c: $(obj)/mtrr.h
@ln -sf ../../../i386/kernel/cpu/mtrr/main.c $(obj)/main.c
$(obj)/if.c: $(obj)/mtrr.h
......
......@@ -3,8 +3,6 @@
#
L_TARGET := lib.a
export-objs := io.o csum-wrappers.o csum-partial.o
CFLAGS_csum-partial.o := -funroll-loops
obj-y := csum-partial.o csum-copy.o csum-wrappers.o delay.o \
......
......@@ -2,7 +2,5 @@
# Makefile for the linux i386-specific parts of the memory manager.
#
export-objs := pageattr.o
obj-y := init.o fault.o ioremap.o extable.o pageattr.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
......@@ -2,8 +2,6 @@
# Cryptographic API
#
export-objs := api.o hmac.o
autoload-crypto-$(CONFIG_KMOD) = autoload.o
proc-crypto-$(CONFIG_PROC_FS) = proc.o
......
......@@ -2,7 +2,6 @@
# Makefile for drivers/acorn/scsi
#
export-objs := fas216.o queue.o msgqueue.o
acornscsi_mod-objs := acornscsi.o acornscsi-io.o
obj-$(CONFIG_SCSI_ACORNSCSI_3) += acornscsi_mod.o queue.o msgqueue.o
......
......@@ -12,8 +12,6 @@ endif
EXTRA_CFLAGS += $(ACPI_CFLAGS)
export-objs := acpi_ksyms.o processor.o
obj-y := acpi_ksyms.o
#
......
......@@ -4,7 +4,6 @@
EXTRA_CFLAGS := -g
export-objs := uPD98402.o suni.o idt77105.o
fore_200e-objs := fore200e.o
host-progs := fore200e_mkfirm
......
# Makefile for the Linux device tree
obj-y := core.o sys.o interface.o power.o bus.o \
driver.o class.o intf.o platform.o \
cpu.o firmware.o
obj-y := core.o sys.o interface.o power.o bus.o \
driver.o class.o intf.o platform.o \
cpu.o firmware.o
obj-$(CONFIG_NUMA) += node.o memblk.o
obj-y += fs/
obj-y += fs/
obj-$(CONFIG_HOTPLUG) += hotplug.o
export-objs := core.o power.o sys.o bus.o driver.o \
class.o intf.o platform.o firmware.o
obj-y := device.o
export-objs := device.o
......@@ -8,9 +8,6 @@
# In the future, some of these should be built conditionally.
#
export-objs := elevator.o ll_rw_blk.o loop.o genhd.o acsi.o \
scsi_ioctl.o deadline-iosched.o
obj-y := elevator.o ll_rw_blk.o ioctl.o genhd.o scsi_ioctl.o deadline-iosched.o
obj-$(CONFIG_MAC_FLOPPY) += swim3.o
......
......@@ -5,8 +5,6 @@
# Rewritten to use lists instead of if-statements.
#
export-objs := paride.o
obj-$(CONFIG_PARIDE) += paride.o
obj-$(CONFIG_PARIDE_ATEN) += aten.o
obj-$(CONFIG_PARIDE_BPCK) += bpck.o
......
......@@ -3,22 +3,6 @@
# 30 Jan 1998, Michael Elizabeth Chastain, <mailto:mec@shout.net>
# Rewritten to use lists instead of if-statements.
# All of the (potential) objects that export symbols.
# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
export-objs := cdrom.o
# Object file lists.
obj-y :=
obj-m :=
obj-n :=
obj- :=
# Each configuration option enables a list of files.
obj-$(CONFIG_BLK_DEV_IDECD) += cdrom.o
......
......@@ -9,13 +9,6 @@ FONTMAPFILE = cp437.uni
obj-y += mem.o tty_io.o n_tty.o tty_ioctl.o pty.o misc.o random.o
# All of the (potential) objects that export symbols.
# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
export-objs := busmouse.o vt.o generic_serial.o ip2main.o consolemap.o\
ite_gpio.o keyboard.o misc.o nvram.o random.o rtc.o \
selection.o sonypi.o sysrq.o tty_io.o tty_ioctl.o
obj-$(CONFIG_VT) += vt_ioctl.o vc_screen.o consolemap.o consolemap_deftbl.o selection.o keyboard.o
obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o
obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o
......
......@@ -3,8 +3,6 @@
# space ioctl interface to use agp memory. It also adds a kernel interface
# that other drivers could use to manipulate agp memory.
export-objs := backend.o
agpgart-y := backend.o frontend.o generic.o
agpgart-$(CONFIG_AGP3) += generic-3.0.o
agpgart-objs := $(agpgart-y)
......
......@@ -23,8 +23,6 @@
# driver for Linux.
#
export-objs := ftape_syms.o
obj-$(CONFIG_FTAPE) += ftape.o
ftape-objs := ftape-init.o fdc-io.o fdc-isr.o \
......
......@@ -27,8 +27,6 @@
# ZFT_OBSOLETE - enable the MTIOC_ZFTAPE_GETBLKSZ ioctl. You should
# leave this enabled for compatibility with taper.
export-objs := zftape_syms.o
obj-$(CONFIG_ZFTAPE) += zftape.o
zftape-objs := zftape-rw.o zftape-ctl.o zftape-read.o \
......
......@@ -2,8 +2,6 @@
# Makefile for the ipmi drivers.
#
export-objs := ipmi_msghandler.o ipmi_watchdog.o
ipmi_kcs_drv-objs := ipmi_kcs_sm.o ipmi_kcs_intf.o
obj-$(CONFIG_IPMI_HANDLER) += ipmi_msghandler.o
......
......@@ -2,8 +2,6 @@
obj-$(CONFIG_EISA) += eisa-bus.o
export-objs := eisa-bus.o
clean-files:= devlist.h
# Ugly hack to get DEVICE_NAME_SIZE value...
......
......@@ -2,8 +2,6 @@
# Makefile for the Linux Fibre Channel device drivers.
#
export-objs := fc_syms.o
fc4-objs := fc.o fc_syms.o
obj-$(CONFIG_FC4) += fc4.o
......
......@@ -2,8 +2,6 @@
# Makefile for the Linux kernel pci hotplug controller drivers.
#
export-objs := pci_hotplug_core.o pci_hotplug_util.o cpci_hotplug_core.o
obj-$(CONFIG_HOTPLUG_PCI) += pci_hotplug.o
obj-$(CONFIG_HOTPLUG_PCI_COMPAQ) += cpqphp.o
obj-$(CONFIG_HOTPLUG_PCI_IBM) += ibmphp.o
......
......@@ -2,9 +2,6 @@
# Makefile for the kernel i2c bus driver.
#
export-objs := i2c-core.o i2c-algo-bit.o i2c-algo-pcf.o \
i2c-algo-ite.o i2c-proc.o i2c-algo-ibm_ocp.o
obj-$(CONFIG_I2C) += i2c-core.o
obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
obj-$(CONFIG_I2C_ALGOBIT) += i2c-algo-bit.o
......
......@@ -7,8 +7,6 @@
# Note : at this point, these files are compiled on all systems.
# In the future, some of these should be built conditionally.
#
export-objs := ide-iops.o ide-taskfile.o ide-proc.o ide.o ide-probe.o ide-dma.o ide-lib.o setup-pci.o ide-io.o
# First come modules that register themselves with the core
obj-$(CONFIG_BLK_DEV_IDEPCI) += pci/
......
......@@ -2,8 +2,6 @@
# Makefile for the Linux IEEE 1394 implementation
#
export-objs := ieee1394_core.o ohci1394.o cmp.o
ieee1394-objs := ieee1394_core.o ieee1394_transactions.o hosts.o \
highlevel.o csr.o nodemgr.o oui.o dma.o iso.o
......
......@@ -2,10 +2,6 @@
# Makefile for the input core drivers.
#
# Objects that export symbols.
export-objs := input.o
# Each configuration option enables a list of files.
obj-$(CONFIG_INPUT) += input.o
......
......@@ -2,10 +2,6 @@
# Makefile for the gameport drivers.
#
# Objects that export symbols.
export-objs := gameport.o
# Each configuration option enables a list of files.
obj-$(CONFIG_GAMEPORT) += gameport.o
......
......@@ -2,10 +2,6 @@
# Makefile for the input core drivers.
#
# Objects that export symbols.
export-objs := serio.o
# Each configuration option enables a list of files.
obj-$(CONFIG_SERIO) += serio.o
......
# Makefile for the CAPI subsystem.
# Objects that export symbols.
export-objs := kcapi.o capiutil.o capilib.o capifs.o
# Ordering constraints: kernelcapi.o first
# Each configuration option enables a list of files.
......
# Makefile for the eicon ISDN device driver
# Objects that export symbols.
export-objs := Divas_mod.o eicon_mod.o
# Each configuration option enables a list of files.
obj-$(CONFIG_ISDN_DRV_EICON_OLD) += eicon.o
......
# Makefile for the AVM ISDN device drivers
# Objects that export symbols.
export-objs := b1dma.o b1pcmcia.o b1.o
# Each configuration option enables a list of files.
obj-$(CONFIG_ISDN_DRV_AVMB1_B1ISA) += b1isa.o b1.o
......
# Makefile for the Eicon DIVA ISDN drivers.
# Objects that export symbols.
export-objs := diva_didd.o
# Multipart objects.
divas-objs := divasmain.o divasfunc.o di.o io.o istream.o diva.o dlist.o divasproc.o diva_dma.o
......
......@@ -4,10 +4,6 @@
EXTRA_CFLAGS += -DHISAX_MAX_CARDS=$(CONFIG_HISAX_MAX_CARDS)
# Objects that export symbols.
export-objs := config.o hisax_isac.o hisax_hscx.o
# Each configuration option enables a list of files.
obj-$(CONFIG_ISDN_DRV_HISAX) += hisax.o
......
# Makefile for the kernel ISDN subsystem and device drivers.
# Objects that export symbols.
export-objs := isdn_common.o
# Each configuration option enables a list of files.
obj-$(CONFIG_ISDN) += isdn.o
......
......@@ -2,17 +2,6 @@
# Makefile for the Macintosh-specific device drivers.
#
# Objects that export symbols.
export-objs := adb.o mac_hid.o via-pmu.o
# Object file lists.
obj-y :=
obj-m :=
obj-n :=
obj- :=
# Each configuration option enables a list of files.
obj-$(CONFIG_PMAC_PBOOK) += mediabay.o
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment