powerpc/powernv: Move npu struct from pnv_phb to pci_controller

The powernv PCI code stores NPU data in the pnv_phb struct. The latter
is referenced by pci_controller::private_data. We are going to have NPU2
support in the pseries platform as well but it does not store any
private_data in in the pci_controller struct; and even if it did,
it would be a different data structure.

This makes npu a pointer and stores it one level higher in
the pci_controller struct.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

arch/powerpc/include/asm/pci-bridge.h

@@ -129,6 +129,7 @@ struct pci_controller {
 #endif	/* CONFIG_PPC64 */
 
 	void *private_data;
+	struct npu *npu;
 };
 
 /* These are used for config access before all the PCI probing

arch/powerpc/platforms/powernv/npu-dma.c

@@ -326,6 +326,25 @@ struct pnv_ioda_pe *pnv_pci_npu_setup_iommu(struct pnv_ioda_pe *npe)
 	return gpe;
 }
 
+/*
+ * NPU2 ATS
+ */
+/* Maximum possible number of ATSD MMIO registers per NPU */
+#define NV_NMMU_ATSD_REGS 8
+
+/* An NPU descriptor, valid for POWER9 only */
+struct npu {
+	int index;
+	__be64 *mmio_atsd_regs[NV_NMMU_ATSD_REGS];
+	unsigned int mmio_atsd_count;
+
+	/* Bitmask for MMIO register usage */
+	unsigned long mmio_atsd_usage;
+
+	/* Do we need to explicitly flush the nest mmu? */
+	bool nmmu_flush;
+};
+
 /* Maximum number of nvlinks per npu */
 #define NV_MAX_LINKS 6
 
@@ -477,7 +496,6 @@ static void acquire_atsd_reg(struct npu_context *npu_context,
 	int i, j;
 	struct npu *npu;
 	struct pci_dev *npdev;
-	struct pnv_phb *nphb;
 
 	for (i = 0; i <= max_npu2_index; i++) {
 		mmio_atsd_reg[i].reg = -1;
@@ -492,8 +510,7 @@ static void acquire_atsd_reg(struct npu_context *npu_context,
 			if (!npdev)
 				continue;
 
-			nphb = pci_bus_to_host(npdev->bus)->private_data;
-			npu = &nphb->npu;
+			npu = pci_bus_to_host(npdev->bus)->npu;
 			mmio_atsd_reg[i].npu = npu;
 			mmio_atsd_reg[i].reg = get_mmio_atsd_reg(npu);
 			while (mmio_atsd_reg[i].reg < 0) {
@@ -661,6 +678,7 @@ struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
 	struct pnv_phb *nphb;
 	struct npu *npu;
 	struct npu_context *npu_context;
+	struct pci_controller *hose;
 
 	/*
 	 * At present we don't support GPUs connected to multiple NPUs and I'm
@@ -688,8 +706,9 @@ struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
 		return ERR_PTR(-EINVAL);
 	}
 
-	nphb = pci_bus_to_host(npdev->bus)->private_data;
-	npu = &nphb->npu;
+	hose = pci_bus_to_host(npdev->bus);
+	nphb = hose->private_data;
+	npu = hose->npu;
 
 	/*
 	 * Setup the NPU context table for a particular GPU. These need to be
@@ -763,7 +782,7 @@ struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
 	 */
 	WRITE_ONCE(npu_context->npdev[npu->index][nvlink_index], npdev);
 
-	if (!nphb->npu.nmmu_flush) {
+	if (!npu->nmmu_flush) {
 		/*
 		 * If we're not explicitly flushing ourselves we need to mark
 		 * the thread for global flushes
@@ -801,6 +820,7 @@ void pnv_npu2_destroy_context(struct npu_context *npu_context,
 	struct pci_dev *npdev = pnv_pci_get_npu_dev(gpdev, 0);
 	struct device_node *nvlink_dn;
 	u32 nvlink_index;
+	struct pci_controller *hose;
 
 	if (WARN_ON(!npdev))
 		return;
@@ -808,8 +828,9 @@ void pnv_npu2_destroy_context(struct npu_context *npu_context,
 	if (!firmware_has_feature(FW_FEATURE_OPAL))
 		return;
 
-	nphb = pci_bus_to_host(npdev->bus)->private_data;
-	npu = &nphb->npu;
+	hose = pci_bus_to_host(npdev->bus);
+	nphb = hose->private_data;
+	npu = hose->npu;
 	nvlink_dn = of_parse_phandle(npdev->dev.of_node, "ibm,nvlink", 0);
 	if (WARN_ON(of_property_read_u32(nvlink_dn, "ibm,npu-link-index",
 							&nvlink_index)))
@@ -887,9 +908,15 @@ int pnv_npu2_init(struct pnv_phb *phb)
 	struct pci_dev *gpdev;
 	static int npu_index;
 	uint64_t rc = 0;
+	struct pci_controller *hose = phb->hose;
+	struct npu *npu;
+	int ret;
+
+	npu = kzalloc(sizeof(*npu), GFP_KERNEL);
+	if (!npu)
+		return -ENOMEM;
 
-	phb->npu.nmmu_flush =
-		of_property_read_bool(phb->hose->dn, "ibm,nmmu-flush");
+	npu->nmmu_flush = of_property_read_bool(hose->dn, "ibm,nmmu-flush");
 	for_each_child_of_node(phb->hose->dn, dn) {
 		gpdev = pnv_pci_get_gpu_dev(get_pci_dev(dn));
 		if (gpdev) {
@@ -903,18 +930,29 @@ int pnv_npu2_init(struct pnv_phb *phb)
 		}
 	}
 
-	for (i = 0; !of_property_read_u64_index(phb->hose->dn, "ibm,mmio-atsd",
+	for (i = 0; !of_property_read_u64_index(hose->dn, "ibm,mmio-atsd",
 							i, &mmio_atsd); i++)
-		phb->npu.mmio_atsd_regs[i] = ioremap(mmio_atsd, 32);
+		npu->mmio_atsd_regs[i] = ioremap(mmio_atsd, 32);
 
-	pr_info("NPU%lld: Found %d MMIO ATSD registers", phb->opal_id, i);
-	phb->npu.mmio_atsd_count = i;
-	phb->npu.mmio_atsd_usage = 0;
+	pr_info("NPU%d: Found %d MMIO ATSD registers", hose->global_number, i);
+	npu->mmio_atsd_count = i;
+	npu->mmio_atsd_usage = 0;
 	npu_index++;
-	if (WARN_ON(npu_index >= NV_MAX_NPUS))
-		return -ENOSPC;
+	if (WARN_ON(npu_index >= NV_MAX_NPUS)) {
+		ret = -ENOSPC;
+		goto fail_exit;
+	}
 	max_npu2_index = npu_index;
-	phb->npu.index = npu_index;
+	npu->index = npu_index;
+	hose->npu = npu;
 
 	return 0;
+
+fail_exit:
+	for (i = 0; i < npu->mmio_atsd_count; ++i)
+		iounmap(npu->mmio_atsd_regs[i]);
+
+	kfree(npu);
+
+	return ret;
 }

arch/powerpc/platforms/powernv/pci-ioda.c

@@ -1278,7 +1278,7 @@ static void pnv_pci_ioda_setup_PEs(void)
 			pnv_ioda_reserve_pe(phb, 0);
 			pnv_ioda_setup_npu_PEs(hose->bus);
 			if (phb->model == PNV_PHB_MODEL_NPU2)
-				pnv_npu2_init(phb);
+				WARN_ON_ONCE(pnv_npu2_init(phb));
 		}
 		if (phb->type == PNV_PHB_NPU_OCAPI) {
 			bus = hose->bus;

arch/powerpc/platforms/powernv/pci.h

@@ -8,9 +8,6 @@
 
 struct pci_dn;
 
-/* Maximum possible number of ATSD MMIO registers per NPU */
-#define NV_NMMU_ATSD_REGS 8
-
 enum pnv_phb_type {
 	PNV_PHB_IODA1		= 0,
 	PNV_PHB_IODA2		= 1,
@@ -174,19 +171,6 @@ struct pnv_phb {
 	unsigned int		diag_data_size;
 	u8			*diag_data;
 
-	/* Nvlink2 data */
-	struct npu {
-		int index;
-		__be64 *mmio_atsd_regs[NV_NMMU_ATSD_REGS];
-		unsigned int mmio_atsd_count;
-
-		/* Bitmask for MMIO register usage */
-		unsigned long mmio_atsd_usage;
-
-		/* Do we need to explicitly flush the nest mmu? */
-		bool nmmu_flush;
-	} npu;
-
 	int p2p_target_count;
 };