Commit 46d5cedd authored by Emil Tantilov's avatar Emil Tantilov Committed by Jeff Kirsher

ixgbe: add support for disabling link at boot time on 82599

This patch adds support for disabling link during boot time. This
feature was requested by customers and is configurable through the EEPROM.
Signed-off-by: default avatarEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: default avatarPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 5e82f2f0
......@@ -1051,6 +1051,14 @@ static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
*/
hw->mac.cached_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
/* Enable link if disabled in NVM */
if (autoc2 & IXGBE_AUTOC2_LINK_DISABLE_MASK) {
autoc2 &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK;
IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
IXGBE_WRITE_FLUSH(hw);
}
if (hw->mac.orig_link_settings_stored == false) {
hw->mac.orig_autoc = hw->mac.cached_autoc;
hw->mac.orig_autoc2 = autoc2;
......@@ -2186,8 +2194,17 @@ static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
**/
s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw)
{
s32 i, autoc_reg, ret_val;
s32 anlp1_reg = 0;
s32 ret_val;
u32 anlp1_reg = 0;
u32 i, autoc_reg, autoc2_reg;
/* Enable link if disabled in NVM */
autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
if (autoc2_reg & IXGBE_AUTOC2_LINK_DISABLE_MASK) {
autoc2_reg &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK;
IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg);
IXGBE_WRITE_FLUSH(hw);
}
autoc_reg = hw->mac.cached_autoc;
autoc_reg |= IXGBE_AUTOC_AN_RESTART;
......
......@@ -1593,6 +1593,7 @@ enum {
#define IXGBE_AUTOC2_10G_KR (0x0 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
#define IXGBE_AUTOC2_10G_XFI (0x1 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
#define IXGBE_AUTOC2_10G_SFI (0x2 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
#define IXGBE_AUTOC2_LINK_DISABLE_MASK 0x70000000
#define IXGBE_MACC_FLU 0x00000001
#define IXGBE_MACC_FSV_10G 0x00030000
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment