Commit 48458b0c authored by Gwendal Grignou's avatar Gwendal Grignou Committed by Jonathan Cameron

iio: cros_ec_light_prox: add ChromeOS EC Light and Proximity Sensors

Handle Light and Proximity sensors presented by the ChromeOS EC Sensor hub.
Creates an IIO device for each functions.
Signed-off-by: default avatarGwendal Grignou <gwendal@chromium.org>
Signed-off-by: default avatarGuenter Roeck <groeck@chromium.org>
Signed-off-by: default avatarEnric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent 1bf70767
......@@ -136,6 +136,16 @@ config CM36651
To compile this driver as a module, choose M here:
the module will be called cm36651.
config IIO_CROS_EC_LIGHT_PROX
tristate "ChromeOS EC Light and Proximity Sensors"
depends on IIO_CROS_EC_SENSORS_CORE
help
Say Y here if you use the light and proximity sensors
presented by the ChromeOS EC Sensor hub.
To compile this driver as a module, choose M here:
the module will be called cros_ec_light_prox.
config GP2AP020A00F
tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
depends on I2C
......
......@@ -15,6 +15,7 @@ obj-$(CONFIG_CM3232) += cm3232.o
obj-$(CONFIG_CM3323) += cm3323.o
obj-$(CONFIG_CM3605) += cm3605.o
obj-$(CONFIG_CM36651) += cm36651.o
obj-$(CONFIG_IIO_CROS_EC_LIGHT_PROX) += cros_ec_light_prox.o
obj-$(CONFIG_GP2AP020A00F) += gp2ap020a00f.o
obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o
obj-$(CONFIG_HID_SENSOR_PROX) += hid-sensor-prox.o
......
/*
* cros_ec_light_prox - Driver for light and prox sensors behing CrosEC.
*
* Copyright (C) 2017 Google, Inc
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/iio/buffer.h>
#include <linux/iio/iio.h>
#include <linux/iio/kfifo_buf.h>
#include <linux/iio/trigger.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/kernel.h>
#include <linux/mfd/cros_ec.h>
#include <linux/mfd/cros_ec_commands.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include "../common/cros_ec_sensors/cros_ec_sensors_core.h"
/*
* We only represent one entry for light or proximity. EC is merging different
* light sensors to return the what the eye would see. For proximity, we
* currently support only one light source.
*/
#define CROS_EC_LIGHT_PROX_MAX_CHANNELS (1 + 1)
/* State data for ec_sensors iio driver. */
struct cros_ec_light_prox_state {
/* Shared by all sensors */
struct cros_ec_sensors_core_state core;
struct iio_chan_spec channels[CROS_EC_LIGHT_PROX_MAX_CHANNELS];
};
static int cros_ec_light_prox_read(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct cros_ec_light_prox_state *st = iio_priv(indio_dev);
u16 data = 0;
s64 val64;
int ret = IIO_VAL_INT;
int idx = chan->scan_index;
mutex_lock(&st->core.cmd_lock);
switch (mask) {
case IIO_CHAN_INFO_RAW:
if (chan->type == IIO_PROXIMITY) {
if (cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
(s16 *)&data) < 0) {
ret = -EIO;
break;
}
*val = data;
} else {
ret = -EINVAL;
}
break;
case IIO_CHAN_INFO_PROCESSED:
if (chan->type == IIO_LIGHT) {
if (cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
(s16 *)&data) < 0) {
ret = -EIO;
break;
}
/*
* The data coming from the light sensor is
* pre-processed and represents the ambient light
* illuminance reading expressed in lux.
*/
*val = data;
ret = IIO_VAL_INT;
} else {
ret = -EINVAL;
}
break;
case IIO_CHAN_INFO_CALIBBIAS:
st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
st->core.param.sensor_offset.flags = 0;
if (cros_ec_motion_send_host_cmd(&st->core, 0)) {
ret = -EIO;
break;
}
/* Save values */
st->core.calib[0] = st->core.resp->sensor_offset.offset[0];
*val = st->core.calib[idx];
break;
case IIO_CHAN_INFO_CALIBSCALE:
/*
* RANGE is used for calibration
* scale is a number x.y, where x is coded on 16 bits,
* y coded on 16 bits, between 0 and 9999.
*/
st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
st->core.param.sensor_range.data = EC_MOTION_SENSE_NO_VALUE;
if (cros_ec_motion_send_host_cmd(&st->core, 0)) {
ret = -EIO;
break;
}
val64 = st->core.resp->sensor_range.ret;
*val = val64 >> 16;
*val2 = (val64 & 0xffff) * 100;
ret = IIO_VAL_INT_PLUS_MICRO;
break;
default:
ret = cros_ec_sensors_core_read(&st->core, chan, val, val2,
mask);
break;
}
mutex_unlock(&st->core.cmd_lock);
return ret;
}
static int cros_ec_light_prox_write(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
struct cros_ec_light_prox_state *st = iio_priv(indio_dev);
int ret = 0;
int idx = chan->scan_index;
mutex_lock(&st->core.cmd_lock);
switch (mask) {
case IIO_CHAN_INFO_CALIBBIAS:
st->core.calib[idx] = val;
/* Send to EC for each axis, even if not complete */
st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
st->core.param.sensor_offset.flags = MOTION_SENSE_SET_OFFSET;
st->core.param.sensor_offset.offset[0] = st->core.calib[0];
st->core.param.sensor_offset.temp =
EC_MOTION_SENSE_INVALID_CALIB_TEMP;
if (cros_ec_motion_send_host_cmd(&st->core, 0))
ret = -EIO;
break;
case IIO_CHAN_INFO_CALIBSCALE:
st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
st->core.param.sensor_range.data = (val << 16) | (val2 / 100);
if (cros_ec_motion_send_host_cmd(&st->core, 0))
ret = -EIO;
break;
default:
ret = cros_ec_sensors_core_write(&st->core, chan, val, val2,
mask);
break;
}
mutex_unlock(&st->core.cmd_lock);
return ret;
}
static const struct iio_info cros_ec_light_prox_info = {
.read_raw = &cros_ec_light_prox_read,
.write_raw = &cros_ec_light_prox_write,
.driver_module = THIS_MODULE,
};
static int cros_ec_light_prox_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct cros_ec_dev *ec_dev = dev_get_drvdata(dev->parent);
struct cros_ec_device *ec_device;
struct iio_dev *indio_dev;
struct cros_ec_light_prox_state *state;
struct iio_chan_spec *channel;
int ret;
if (!ec_dev || !ec_dev->ec_dev) {
dev_warn(dev, "No CROS EC device found.\n");
return -EINVAL;
}
ec_device = ec_dev->ec_dev;
indio_dev = devm_iio_device_alloc(dev, sizeof(*state));
if (!indio_dev)
return -ENOMEM;
ret = cros_ec_sensors_core_init(pdev, indio_dev, true);
if (ret)
return ret;
indio_dev->info = &cros_ec_light_prox_info;
state = iio_priv(indio_dev);
state->core.type = state->core.resp->info.type;
state->core.loc = state->core.resp->info.location;
channel = state->channels;
/* Common part */
channel->info_mask_shared_by_all =
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
BIT(IIO_CHAN_INFO_FREQUENCY);
channel->scan_type.realbits = CROS_EC_SENSOR_BITS;
channel->scan_type.storagebits = CROS_EC_SENSOR_BITS;
channel->scan_type.shift = 0;
channel->scan_index = 0;
channel->ext_info = cros_ec_sensors_ext_info;
channel->scan_type.sign = 'u';
state->core.calib[0] = 0;
/* Sensor specific */
switch (state->core.type) {
case MOTIONSENSE_TYPE_LIGHT:
channel->type = IIO_LIGHT;
channel->info_mask_separate =
BIT(IIO_CHAN_INFO_PROCESSED) |
BIT(IIO_CHAN_INFO_CALIBBIAS) |
BIT(IIO_CHAN_INFO_CALIBSCALE);
break;
case MOTIONSENSE_TYPE_PROX:
channel->type = IIO_PROXIMITY;
channel->info_mask_separate =
BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_CALIBBIAS) |
BIT(IIO_CHAN_INFO_CALIBSCALE);
break;
default:
dev_warn(dev, "Unknown motion sensor\n");
return -EINVAL;
}
/* Timestamp */
channel++;
channel->type = IIO_TIMESTAMP;
channel->channel = -1;
channel->scan_index = 1;
channel->scan_type.sign = 's';
channel->scan_type.realbits = 64;
channel->scan_type.storagebits = 64;
indio_dev->channels = state->channels;
indio_dev->num_channels = CROS_EC_LIGHT_PROX_MAX_CHANNELS;
state->core.read_ec_sensors_data = cros_ec_sensors_read_cmd;
ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
cros_ec_sensors_capture, NULL);
if (ret)
return ret;
return devm_iio_device_register(dev, indio_dev);
}
static const struct platform_device_id cros_ec_light_prox_ids[] = {
{
.name = "cros-ec-prox",
},
{
.name = "cros-ec-light",
},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(platform, cros_ec_light_prox_ids);
static struct platform_driver cros_ec_light_prox_platform_driver = {
.driver = {
.name = "cros-ec-light-prox",
},
.probe = cros_ec_light_prox_probe,
.id_table = cros_ec_light_prox_ids,
};
module_platform_driver(cros_ec_light_prox_platform_driver);
MODULE_DESCRIPTION("ChromeOS EC light/proximity sensors driver");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment