Commit 48773e68 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

V4L/DVB (3599c): Whitespace cleanups under Documentation/video4linux

Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent d56410e0
This diff is collapsed.
...@@ -87,7 +87,7 @@ hardware configuration of the parport. You can give the boot-parameter ...@@ -87,7 +87,7 @@ hardware configuration of the parport. You can give the boot-parameter
at the LILO-prompt or specify it in lilo.conf. I use the following at the LILO-prompt or specify it in lilo.conf. I use the following
append-line in lilo.conf: append-line in lilo.conf:
append="parport=0x378,7,3" append="parport=0x378,7,3"
See Documentation/parport.txt for more information about the See Documentation/parport.txt for more information about the
configuration of the parport and the values given above. Do not simply configuration of the parport and the values given above. Do not simply
...@@ -175,7 +175,7 @@ THANKS (in no particular order): ...@@ -175,7 +175,7 @@ THANKS (in no particular order):
- Manuel J. Petit de Gabriel <mpetit@dit.upm.es> for providing help - Manuel J. Petit de Gabriel <mpetit@dit.upm.es> for providing help
with Isabel (http://isabel.dit.upm.es/) with Isabel (http://isabel.dit.upm.es/)
- Bas Huisman <bhuism@cs.utwente.nl> for writing the initial parport code - Bas Huisman <bhuism@cs.utwente.nl> for writing the initial parport code
- Jarl Totland <Jarl.Totland@bdc.no> for setting up the mailing list - Jarl Totland <Jarl.Totland@bdc.no> for setting up the mailing list
and maintaining the web-server[3] and maintaining the web-server[3]
- Chris Whiteford <Chris@informinteractive.com> for fixes related to the - Chris Whiteford <Chris@informinteractive.com> for fixes related to the
1.02 firmware 1.02 firmware
......
This diff is collapsed.
...@@ -14,13 +14,13 @@ Hauppauge Win/TV pci (version 405): ...@@ -14,13 +14,13 @@ Hauppauge Win/TV pci (version 405):
Microchip 24LC02B or Microchip 24LC02B or
Philips 8582E2Y: 256 Byte EEPROM with configuration information Philips 8582E2Y: 256 Byte EEPROM with configuration information
I2C 0xa0-0xa1, (24LC02B also responds to 0xa2-0xaf) I2C 0xa0-0xa1, (24LC02B also responds to 0xa2-0xaf)
Philips SAA5246AGP/E: Videotext decoder chip, I2C 0x22-0x23 Philips SAA5246AGP/E: Videotext decoder chip, I2C 0x22-0x23
TDA9800: sound decoder TDA9800: sound decoder
Winbond W24257AS-35: 32Kx8 CMOS static RAM (Videotext buffer mem) Winbond W24257AS-35: 32Kx8 CMOS static RAM (Videotext buffer mem)
14052B: analog switch for selection of sound source 14052B: analog switch for selection of sound source
PAL: PAL:
TDA5737: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners TDA5737: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
TSA5522: 1.4 GHz I2C-bus controlled synthesizer, I2C 0xc2-0xc3 TSA5522: 1.4 GHz I2C-bus controlled synthesizer, I2C 0xc2-0xc3
......
...@@ -3,7 +3,7 @@ ...@@ -3,7 +3,7 @@
- Start capturing by pressing "c" or by selecting it via a menu!!! - Start capturing by pressing "c" or by selecting it via a menu!!!
- The memory of some S3 cards is not recognized right: - The memory of some S3 cards is not recognized right:
First of all, if you are not using XFree-3.2 or newer, upgrade AT LEAST to First of all, if you are not using XFree-3.2 or newer, upgrade AT LEAST to
XFree-3.2A! This solved the problem for most people. XFree-3.2A! This solved the problem for most people.
...@@ -31,23 +31,23 @@ ...@@ -31,23 +31,23 @@
(mostly with Trio 64 but also with some others) (mostly with Trio 64 but also with some others)
Get the free demo version of Accelerated X from www.xinside.com and try Get the free demo version of Accelerated X from www.xinside.com and try
bttv with it. bttv seems to work with most S3 cards with Accelerated X. bttv with it. bttv seems to work with most S3 cards with Accelerated X.
Since I do not know much (better make that almost nothing) about VGA card Since I do not know much (better make that almost nothing) about VGA card
programming I do not know the reason for this. programming I do not know the reason for this.
Looks like XFree does something different when setting up the video memory? Looks like XFree does something different when setting up the video memory?
Maybe somebody can enlighten me? Maybe somebody can enlighten me?
Would be nice if somebody could get this to work with XFree since Would be nice if somebody could get this to work with XFree since
Accelerated X costs more than some of the grabber cards ... Accelerated X costs more than some of the grabber cards ...
Better linear frame buffer support for S3 cards will probably be in Better linear frame buffer support for S3 cards will probably be in
XFree 4.0. XFree 4.0.
- Grabbing is not switched off when changing consoles with XFree. - Grabbing is not switched off when changing consoles with XFree.
That's because XFree and some AcceleratedX versions do not send unmap That's because XFree and some AcceleratedX versions do not send unmap
events. events.
- Some popup windows (e.g. of the window manager) are not refreshed. - Some popup windows (e.g. of the window manager) are not refreshed.
Disable backing store by starting X with the option "-bs" Disable backing store by starting X with the option "-bs"
- When using 32 bpp in XFree or 24+8bpp mode in AccelX 3.1 the system - When using 32 bpp in XFree or 24+8bpp mode in AccelX 3.1 the system
......
...@@ -38,9 +38,9 @@ tolerate. ...@@ -38,9 +38,9 @@ tolerate.
------------------------ ------------------------
When using the 430FX PCI, the following rules will ensure When using the 430FX PCI, the following rules will ensure
compatibility: compatibility:
(1) Deassert REQ at the same time as asserting FRAME. (1) Deassert REQ at the same time as asserting FRAME.
(2) Do not reassert REQ to request another bus transaction until after (2) Do not reassert REQ to request another bus transaction until after
finish-ing the previous transaction. finish-ing the previous transaction.
......
Many thanks to: Many thanks to:
- Markus Schroeder <schroedm@uni-duesseldorf.de> for information on the Bt848 - Markus Schroeder <schroedm@uni-duesseldorf.de> for information on the Bt848
and tuner programming and his control program xtvc. and tuner programming and his control program xtvc.
- Martin Buck <martin-2.buck@student.uni-ulm.de> for his great Videotext - Martin Buck <martin-2.buck@student.uni-ulm.de> for his great Videotext
...@@ -16,7 +16,7 @@ Many thanks to: ...@@ -16,7 +16,7 @@ Many thanks to:
- MIRO for providing a free PCTV card and detailed information about the - MIRO for providing a free PCTV card and detailed information about the
components on their cards. (E.g. how the tuner type is detected) components on their cards. (E.g. how the tuner type is detected)
Without their card I could not have debugged the NTSC mode. Without their card I could not have debugged the NTSC mode.
- Hauppauge for telling how the sound input is selected and what components - Hauppauge for telling how the sound input is selected and what components
they do and will use on their radio cards. they do and will use on their radio cards.
Also many thanks for faxing me the FM1216 data sheet. Also many thanks for faxing me the FM1216 data sheet.
......
...@@ -131,17 +131,17 @@ Check Stereo: BASE <-- 0xd8 (current volume, stereo detect, ...@@ -131,17 +131,17 @@ Check Stereo: BASE <-- 0xd8 (current volume, stereo detect,
x=0xff ==> "not stereo", x=0xfd ==> "stereo detected" x=0xff ==> "not stereo", x=0xfd ==> "stereo detected"
Set Frequency: code = (freq*40) + 10486188 Set Frequency: code = (freq*40) + 10486188
foreach of the 24 bits in code, foreach of the 24 bits in code,
(from Least to Most Significant): (from Least to Most Significant):
to write a "zero" bit, to write a "zero" bit,
BASE <-- 0x01 (audio mute, no stereo detect, radio BASE <-- 0x01 (audio mute, no stereo detect, radio
disable, "zero" bit phase 1, tuner adjust) disable, "zero" bit phase 1, tuner adjust)
BASE <-- 0x03 (audio mute, no stereo detect, radio BASE <-- 0x03 (audio mute, no stereo detect, radio
disable, "zero" bit phase 2, tuner adjust) disable, "zero" bit phase 2, tuner adjust)
to write a "one" bit, to write a "one" bit,
BASE <-- 0x05 (audio mute, no stereo detect, radio BASE <-- 0x05 (audio mute, no stereo detect, radio
disable, "one" bit phase 1, tuner adjust) disable, "one" bit phase 1, tuner adjust)
BASE <-- 0x07 (audio mute, no stereo detect, radio BASE <-- 0x07 (audio mute, no stereo detect, radio
disable, "one" bit phase 2, tuner adjust) disable, "one" bit phase 2, tuner adjust)
---------------------------------------------------------------------------- ----------------------------------------------------------------------------
...@@ -26,7 +26,7 @@ is called VIDEO_PALETTE_YUV422 (16 bpp). ...@@ -26,7 +26,7 @@ is called VIDEO_PALETTE_YUV422 (16 bpp).
A minimal test application (with source) is available from: A minimal test application (with source) is available from:
http://hem.fyristorg.com/mogul/w9966.html http://hem.fyristorg.com/mogul/w9966.html
The slow framerate is due to missing DMA ECP read support in the The slow framerate is due to missing DMA ECP read support in the
parport drivers. I might add working EPP support later. parport drivers. I might add working EPP support later.
Good luck! Good luck!
......
...@@ -2,7 +2,7 @@ Driver for Trust Computer Products Framegrabber, version 0.6.1 ...@@ -2,7 +2,7 @@ Driver for Trust Computer Products Framegrabber, version 0.6.1
------ --- ----- -------- -------- ------------ ------- - - - ------ --- ----- -------- -------- ------------ ------- - - -
- ZORAN ------------------------------------------------------ - ZORAN ------------------------------------------------------
Author: Pauline Middelink <middelin@polyware.nl> Author: Pauline Middelink <middelin@polyware.nl>
Date: 18 September 1999 Date: 18 September 1999
Version: 0.6.1 Version: 0.6.1
...@@ -115,7 +115,7 @@ After making/checking the devices do: ...@@ -115,7 +115,7 @@ After making/checking the devices do:
<n> is the cardtype of the card you have. The cardnumber can <n> is the cardtype of the card you have. The cardnumber can
be found in the source of zr36120. Look for tvcards. If your be found in the source of zr36120. Look for tvcards. If your
card is not there, please try if any other card gives some card is not there, please try if any other card gives some
response, and mail me if you got a working tvcard addition. response, and mail me if you got a working tvcard addition.
PS. <TVCard editors behold!) PS. <TVCard editors behold!)
Dont forget to set video_input to the number of inputs Dont forget to set video_input to the number of inputs
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment