Commit 489f231e authored by Kai Vehmanen's avatar Kai Vehmanen Committed by Mark Brown

ASoC: codec: hdac_hdmi: fix pin connections at cvt enable

In display codecs supported by hdac_hdmi, the connection indices are
shared by all converters. At boot and resume from suspend,
the connection state may be reset to default values.

In case of multiple connected pins (multiple monitors connected
with audio capability), routing and mute status of pins that
are not connected to any PCM, may interfere with other pins.
E.g. after resume from S3 with multiple monitors, unless
all converters are in active use, playback to some PCMs may
be muted due to the default settings of unrelated converters.

Avoid this by ensuring all pin:cvt selections are correct
in codec whenever a converter is enabled for playback.
Signed-off-by: default avatarKai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent cb36ff78
...@@ -546,6 +546,29 @@ static struct hdac_hdmi_port *hdac_hdmi_get_port_from_cvt( ...@@ -546,6 +546,29 @@ static struct hdac_hdmi_port *hdac_hdmi_get_port_from_cvt(
return NULL; return NULL;
} }
/*
* Go through all converters and ensure connection is set to
* the correct pin as set via kcontrols.
*/
static void hdac_hdmi_verify_connect_sel_all_pins(struct hdac_device *hdev)
{
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
struct hdac_hdmi_port *port;
struct hdac_hdmi_cvt *cvt;
int cvt_idx = 0;
list_for_each_entry(cvt, &hdmi->cvt_list, head) {
port = hdac_hdmi_get_port_from_cvt(hdev, hdmi, cvt);
if (port && port->pin) {
snd_hdac_codec_write(hdev, port->pin->nid, 0,
AC_VERB_SET_CONNECT_SEL, cvt_idx);
dev_dbg(&hdev->dev, "%s: %s set connect %d -> %d\n",
__func__, cvt->name, port->pin->nid, cvt_idx);
}
++cvt_idx;
}
}
/* /*
* This tries to get a valid pin and set the HW constraints based on the * This tries to get a valid pin and set the HW constraints based on the
* ELD. Even if a valid pin is not found return success so that device open * ELD. Even if a valid pin is not found return success so that device open
...@@ -806,6 +829,14 @@ static int hdac_hdmi_cvt_output_widget_event(struct snd_soc_dapm_widget *w, ...@@ -806,6 +829,14 @@ static int hdac_hdmi_cvt_output_widget_event(struct snd_soc_dapm_widget *w,
AC_VERB_SET_CHANNEL_STREAMID, pcm->stream_tag); AC_VERB_SET_CHANNEL_STREAMID, pcm->stream_tag);
snd_hdac_codec_write(hdev, cvt->nid, 0, snd_hdac_codec_write(hdev, cvt->nid, 0,
AC_VERB_SET_STREAM_FORMAT, pcm->format); AC_VERB_SET_STREAM_FORMAT, pcm->format);
/*
* The connection indices are shared by all converters and
* may interfere with each other. Ensure correct
* routing for all converters at stream start.
*/
hdac_hdmi_verify_connect_sel_all_pins(hdev);
break; break;
case SND_SOC_DAPM_POST_PMD: case SND_SOC_DAPM_POST_PMD:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment