Merge tag 'mac80211-for-davem-2015-03-16' of...

Merge tag 'mac80211-for-davem-2015-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Here are a few fixes that I'd like to still get in:
 * disable U-APSD for better interoperability, from Michal Kazior
 * drop unencrypted frames in mesh forwarding, from Bob Copeland
 * treat non-QoS/WMM HT stations as non-HT, to fix confusion when
   they connect and then get QoS packets anyway due to HT
 * fix counting interfaces for combination checks, otherwise the
   interface combinations aren't properly enforced (from Andrei)
 * fix pure ECSA by reacting to the IE change
 * ignore erroneous (E)CSA to the current channel which sometimes
   happens due to AP/GO bugs
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mac80211/ieee80211_i.h

@@ -58,13 +58,24 @@ struct ieee80211_local;
 #define IEEE80211_UNSET_POWER_LEVEL	INT_MIN
 
 /*
- * Some APs experience problems when working with U-APSD. Decrease the
- * probability of that happening by using legacy mode for all ACs but VO.
- * The AP that caused us trouble was a Cisco 4410N. It ignores our
- * setting, and always treats non-VO ACs as legacy.
+ * Some APs experience problems when working with U-APSD. Decreasing the
+ * probability of that happening by using legacy mode for all ACs but VO isn't
+ * enough.
+ *
+ * Cisco 4410N originally forced us to enable VO by default only because it
+ * treated non-VO ACs as legacy.
+ *
+ * However some APs (notably Netgear R7000) silently reclassify packets to
+ * different ACs. Since u-APSD ACs require trigger frames for frame retrieval
+ * clients would never see some frames (e.g. ARP responses) or would fetch them
+ * accidentally after a long time.
+ *
+ * It makes little sense to enable u-APSD queues by default because it needs
+ * userspace applications to be aware of it to actually take advantage of the
+ * possible additional powersavings. Implicitly depending on driver autotrigger
+ * frame support doesn't make much sense.
  */
-#define IEEE80211_DEFAULT_UAPSD_QUEUES \
-	IEEE80211_WMM_IE_STA_QOSINFO_AC_VO
+#define IEEE80211_DEFAULT_UAPSD_QUEUES 0
 
 #define IEEE80211_DEFAULT_MAX_SP_LEN		\
 	IEEE80211_WMM_IE_STA_QOSINFO_SP_ALL
@@ -453,6 +464,7 @@ struct ieee80211_if_managed {
 	unsigned int flags;
 
 	bool csa_waiting_bcn;
+	bool csa_ignored_same_chan;
 
 	bool beacon_crc_valid;
 	u32 beacon_crc;

net/mac80211/mlme.c

@@ -1150,6 +1150,17 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
 		return;
 	}
 
+	if (cfg80211_chandef_identical(&csa_ie.chandef,
+				       &sdata->vif.bss_conf.chandef)) {
+		if (ifmgd->csa_ignored_same_chan)
+			return;
+		sdata_info(sdata,
+			   "AP %pM tries to chanswitch to same channel, ignore\n",
+			   ifmgd->associated->bssid);
+		ifmgd->csa_ignored_same_chan = true;
+		return;
+	}
+
 	mutex_lock(&local->mtx);
 	mutex_lock(&local->chanctx_mtx);
 	conf = rcu_dereference_protected(sdata->vif.chanctx_conf,
@@ -1210,6 +1221,7 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
 	sdata->vif.csa_active = true;
 	sdata->csa_chandef = csa_ie.chandef;
 	sdata->csa_block_tx = csa_ie.mode;
+	ifmgd->csa_ignored_same_chan = false;
 
 	if (sdata->csa_block_tx)
 		ieee80211_stop_vif_queues(local, sdata,
@@ -2090,6 +2102,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 
 	sdata->vif.csa_active = false;
 	ifmgd->csa_waiting_bcn = false;
+	ifmgd->csa_ignored_same_chan = false;
 	if (sdata->csa_block_tx) {
 		ieee80211_wake_vif_queues(local, sdata,
 					  IEEE80211_QUEUE_STOP_REASON_CSA);
@@ -3204,7 +3217,8 @@ static const u64 care_about_ies =
 	(1ULL << WLAN_EID_CHANNEL_SWITCH) |
 	(1ULL << WLAN_EID_PWR_CONSTRAINT) |
 	(1ULL << WLAN_EID_HT_CAPABILITY) |
-	(1ULL << WLAN_EID_HT_OPERATION);
+	(1ULL << WLAN_EID_HT_OPERATION) |
+	(1ULL << WLAN_EID_EXT_CHANSWITCH_ANN);
 
 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 				     struct ieee80211_mgmt *mgmt, size_t len,

net/mac80211/rx.c

@@ -2214,6 +2214,9 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
 	hdr = (struct ieee80211_hdr *) skb->data;
 	mesh_hdr = (struct ieee80211s_hdr *) (skb->data + hdrlen);
 
+	if (ieee80211_drop_unencrypted(rx, hdr->frame_control))
+		return RX_DROP_MONITOR;
+
 	/* frame is in RMC, don't forward */
 	if (ieee80211_is_data(hdr->frame_control) &&
 	    is_multicast_ether_addr(hdr->addr1) &&

net/mac80211/util.c

@@ -3178,7 +3178,7 @@ int ieee80211_check_combinations(struct ieee80211_sub_if_data *sdata,
 		wdev_iter = &sdata_iter->wdev;
 
 		if (sdata_iter == sdata ||
-		    rcu_access_pointer(sdata_iter->vif.chanctx_conf) == NULL ||
+		    !ieee80211_sdata_running(sdata_iter) ||
 		    local->hw.wiphy->software_iftypes & BIT(wdev_iter->iftype))
 			continue;
 

net/wireless/nl80211.c

@@ -4400,6 +4400,16 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 	if (parse_station_flags(info, dev->ieee80211_ptr->iftype, &params))
 		return -EINVAL;
 
+	/* HT/VHT requires QoS, but if we don't have that just ignore HT/VHT
+	 * as userspace might just pass through the capabilities from the IEs
+	 * directly, rather than enforcing this restriction and returning an
+	 * error in this case.
+	 */
+	if (!(params.sta_flags_set & BIT(NL80211_STA_FLAG_WME))) {
+		params.ht_capa = NULL;
+		params.vht_capa = NULL;
+	}
+
 	/* When you run into this, adjust the code below for the new flag */
 	BUILD_BUG_ON(NL80211_STA_FLAG_MAX != 7);