Commit 48e23311 authored by Vivien Didelot's avatar Vivien Didelot Committed by David S. Miller

net: dsa: dump CPU port regs through master

Merge the CPU port registers dump into the master interface registers
dump through ethtool, by nesting the ethtool_drvinfo and ethtool_regs
structures of the CPU port into the dump.

drvinfo->regdump_len will contain the full data length, while regs->len
will contain only the master interface registers dump length.

This allows for example to dump the CPU port registers on a ZII Dev
C board like this:

    # ethtool -d eth1
    0x004:                                              0x00000000
    0x008:                                              0x0a8000aa
    0x010:                                              0x01000000
    0x014:                                              0x00000000
    0x024:                                              0xf0000102
    0x040:                                              0x6d82c800
    0x044:                                              0x00000020
    0x064:                                              0x40000000
    0x084: RCR (Receive Control Register)               0x47c00104
        MAX_FL (Maximum frame length)                   1984
        FCE (Flow control enable)                       0
        BC_REJ (Broadcast frame reject)                 0
        PROM (Promiscuous mode)                         0
        DRT (Disable receive on transmit)               0
        LOOP (Internal loopback)                        0
    0x0c4: TCR (Transmit Control Register)              0x00000004
        RFC_PAUSE (Receive frame control pause)         0
        TFC_PAUSE (Transmit frame control pause)        0
        FDEN (Full duplex enable)                       1
        HBC (Heartbeat control)                         0
        GTS (Graceful transmit stop)                    0
    0x0e4:                                              0x76735d6d
    0x0e8:                                              0x7e9e8808
    0x0ec:                                              0x00010000
    .
    .
    .
    88E6352  Switch Port Registers
    ------------------------------
    00: Port Status                            0x4d04
          Pause Enabled                        0
          My Pause                             1
          802.3 PHY Detected                   0
          Link Status                          Up
          Duplex                               Full
          Speed                                100 or 200 Mbps
          EEE Enabled                          0
          Transmitter Paused                   0
          Flow Control                         0
          Config Mode                          0x4
    01: Physical Control                       0x003d
          RGMII Receive Timing Control         Default
          RGMII Transmit Timing Control        Default
          200 BASE Mode                        100
          Flow Control's Forced value          0
          Force Flow Control                   0
          Link's Forced value                  Up
          Force Link                           1
          Duplex's Forced value                Full
          Force Duplex                         1
          Force Speed                          100 or 200 Mbps
    .
    .
    .
Signed-off-by: default avatarVivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent c4ed5253
......@@ -8,6 +8,70 @@
#include "dsa_priv.h"
static int dsa_master_get_regs_len(struct net_device *dev)
{
struct dsa_port *cpu_dp = dev->dsa_ptr;
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
struct dsa_switch *ds = cpu_dp->ds;
int port = cpu_dp->index;
int ret = 0;
int len;
if (ops->get_regs_len) {
len = ops->get_regs_len(dev);
if (len < 0)
return len;
ret += len;
}
ret += sizeof(struct ethtool_drvinfo);
ret += sizeof(struct ethtool_regs);
if (ds->ops->get_regs_len) {
len = ds->ops->get_regs_len(ds, port);
if (len < 0)
return len;
ret += len;
}
return ret;
}
static void dsa_master_get_regs(struct net_device *dev,
struct ethtool_regs *regs, void *data)
{
struct dsa_port *cpu_dp = dev->dsa_ptr;
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
struct dsa_switch *ds = cpu_dp->ds;
struct ethtool_drvinfo *cpu_info;
struct ethtool_regs *cpu_regs;
int port = cpu_dp->index;
int len;
if (ops->get_regs_len && ops->get_regs) {
len = ops->get_regs_len(dev);
if (len < 0)
return;
regs->len = len;
ops->get_regs(dev, regs, data);
data += regs->len;
}
cpu_info = (struct ethtool_drvinfo *)data;
strlcpy(cpu_info->driver, "dsa", sizeof(cpu_info->driver));
data += sizeof(*cpu_info);
cpu_regs = (struct ethtool_regs *)data;
data += sizeof(*cpu_regs);
if (ds->ops->get_regs_len && ds->ops->get_regs) {
len = ds->ops->get_regs_len(ds, port);
if (len < 0)
return;
cpu_regs->len = len;
ds->ops->get_regs(ds, port, cpu_regs, data);
}
}
static void dsa_master_get_ethtool_stats(struct net_device *dev,
struct ethtool_stats *stats,
uint64_t *data)
......@@ -147,6 +211,8 @@ static int dsa_master_ethtool_setup(struct net_device *dev)
if (cpu_dp->orig_ethtool_ops)
memcpy(ops, cpu_dp->orig_ethtool_ops, sizeof(*ops));
ops->get_regs_len = dsa_master_get_regs_len;
ops->get_regs = dsa_master_get_regs;
ops->get_sset_count = dsa_master_get_sset_count;
ops->get_ethtool_stats = dsa_master_get_ethtool_stats;
ops->get_strings = dsa_master_get_strings;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment