Merge branch 'for-upstream/malidp-fixes' of git://linux-arm.org/linux-ld into drm-fixes

* 'for-upstream/malidp-fixes' of git://linux-arm.org/linux-ld:
  drm: mali-dp: Fix smart layer not going to composition
  drm: mali-dp: Remove mclk rate management

drivers/gpu/drm/arm/malidp_crtc.c

@@ -63,8 +63,7 @@ static void malidp_crtc_enable(struct drm_crtc *crtc)
 
 	clk_prepare_enable(hwdev->pxlclk);
 
-	/* mclk needs to be set to the same or higher rate than pxlclk */
-	clk_set_rate(hwdev->mclk, crtc->state->adjusted_mode.crtc_clock * 1000);
+	/* We rely on firmware to set mclk to a sensible level. */
 	clk_set_rate(hwdev->pxlclk, crtc->state->adjusted_mode.crtc_clock * 1000);
 
 	hwdev->modeset(hwdev, &vm);

drivers/gpu/drm/arm/malidp_hw.c

@@ -83,7 +83,7 @@ static const struct malidp_layer malidp550_layers[] = {
 	{ DE_VIDEO1, MALIDP550_DE_LV1_BASE, MALIDP550_DE_LV1_PTR_BASE, MALIDP_DE_LV_STRIDE0 },
 	{ DE_GRAPHICS1, MALIDP550_DE_LG_BASE, MALIDP550_DE_LG_PTR_BASE, MALIDP_DE_LG_STRIDE },
 	{ DE_VIDEO2, MALIDP550_DE_LV2_BASE, MALIDP550_DE_LV2_PTR_BASE, MALIDP_DE_LV_STRIDE0 },
-	{ DE_SMART, MALIDP550_DE_LS_BASE, MALIDP550_DE_LS_PTR_BASE, 0 },
+	{ DE_SMART, MALIDP550_DE_LS_BASE, MALIDP550_DE_LS_PTR_BASE, MALIDP550_DE_LS_R1_STRIDE },
 };
 
 #define MALIDP_DE_DEFAULT_PREFETCH_START	5

drivers/gpu/drm/arm/malidp_planes.c

@@ -37,6 +37,8 @@
 #define   LAYER_V_VAL(x)		(((x) & 0x1fff) << 16)
 #define MALIDP_LAYER_COMP_SIZE		0x010
 #define MALIDP_LAYER_OFFSET		0x014
+#define MALIDP550_LS_ENABLE		0x01c
+#define MALIDP550_LS_R1_IN_SIZE		0x020
 
 /*
  * This 4-entry look-up-table is used to determine the full 8-bit alpha value
@@ -242,6 +244,11 @@ static void malidp_de_plane_update(struct drm_plane *plane,
 			LAYER_V_VAL(plane->state->crtc_y),
 			mp->layer->base + MALIDP_LAYER_OFFSET);
 
+	if (mp->layer->id == DE_SMART)
+		malidp_hw_write(mp->hwdev,
+				LAYER_H_VAL(src_w) | LAYER_V_VAL(src_h),
+				mp->layer->base + MALIDP550_LS_R1_IN_SIZE);
+
 	/* first clear the rotation bits */
 	val = malidp_hw_read(mp->hwdev, mp->layer->base + MALIDP_LAYER_CONTROL);
 	val &= ~LAYER_ROT_MASK;
@@ -330,9 +337,16 @@ int malidp_de_planes_init(struct drm_device *drm)
 		plane->hwdev = malidp->dev;
 		plane->layer = &map->layers[i];
 
-		/* Skip the features which the SMART layer doesn't have */
-		if (id == DE_SMART)
+		if (id == DE_SMART) {
+			/*
+			 * Enable the first rectangle in the SMART layer to be
+			 * able to use it as a drm plane.
+			 */
+			malidp_hw_write(malidp->dev, 1,
+					plane->layer->base + MALIDP550_LS_ENABLE);
+			/* Skip the features which the SMART layer doesn't have. */
 			continue;
+		}
 
 		drm_plane_create_rotation_property(&plane->base, DRM_ROTATE_0, flags);
 		malidp_hw_write(malidp->dev, MALIDP_ALPHA_LUT,

drivers/gpu/drm/arm/malidp_regs.h

@@ -84,6 +84,7 @@
 /* Stride register offsets relative to Lx_BASE */
 #define MALIDP_DE_LG_STRIDE		0x18
 #define MALIDP_DE_LV_STRIDE0		0x18
+#define MALIDP550_DE_LS_R1_STRIDE	0x28
 
 /* macros to set values into registers */
 #define MALIDP_DE_H_FRONTPORCH(x)	(((x) & 0xfff) << 0)