Commit 4932a918 authored by Russell King's avatar Russell King Committed by David S. Miller

net: mvneta: add flow control support

Add support for flow control to mvneta.
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 22f4bf8a
......@@ -3211,6 +3211,8 @@ static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
phylink_set(mask, Autoneg);
phylink_set_port_modes(mask);
/* Asymmetric pause is unsupported */
phylink_set(mask, Pause);
/* Half-duplex at speeds higher than 100Mbit is unsupported */
phylink_set(mask, 1000baseT_Full);
phylink_set(mask, 1000baseX_Full);
......@@ -3249,6 +3251,10 @@ static int mvneta_mac_link_state(struct net_device *ndev,
state->duplex = !!(gmac_stat & MVNETA_GMAC_FULL_DUPLEX);
state->pause = 0;
if (gmac_stat & MVNETA_GMAC_RX_FLOW_CTRL_ENABLE)
state->pause |= MLO_PAUSE_RX;
if (gmac_stat & MVNETA_GMAC_TX_FLOW_CTRL_ENABLE)
state->pause |= MLO_PAUSE_TX;
return 1;
}
......@@ -3298,6 +3304,11 @@ static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
phy_interface_mode_is_8023z(state->interface))
new_ctrl2 |= MVNETA_GMAC2_PCS_ENABLE;
if (phylink_test(state->advertising, Pause))
new_an |= MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL;
if (state->pause & MLO_PAUSE_TXRX_MASK)
new_an |= MVNETA_GMAC_CONFIG_FLOW_CTRL;
if (!phylink_autoneg_inband(mode)) {
/* Phy or fixed speed */
if (state->duplex)
......@@ -3326,6 +3337,9 @@ static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
MVNETA_GMAC_CONFIG_GMII_SPEED |
/* The MAC only supports FD mode */
MVNETA_GMAC_CONFIG_FULL_DUPLEX;
if (state->pause & MLO_PAUSE_AN && state->an_enabled)
new_an |= MVNETA_GMAC_AN_FLOW_CTRL_EN;
}
/* Armada 370 documentation says we can only change the port mode
......@@ -3813,6 +3827,22 @@ static int mvneta_ethtool_set_ringparam(struct net_device *dev,
return 0;
}
static void mvneta_ethtool_get_pauseparam(struct net_device *dev,
struct ethtool_pauseparam *pause)
{
struct mvneta_port *pp = netdev_priv(dev);
phylink_ethtool_get_pauseparam(pp->phylink, pause);
}
static int mvneta_ethtool_set_pauseparam(struct net_device *dev,
struct ethtool_pauseparam *pause)
{
struct mvneta_port *pp = netdev_priv(dev);
return phylink_ethtool_set_pauseparam(pp->phylink, pause);
}
static void mvneta_ethtool_get_strings(struct net_device *netdev, u32 sset,
u8 *data)
{
......@@ -4021,6 +4051,8 @@ static const struct ethtool_ops mvneta_eth_tool_ops = {
.get_drvinfo = mvneta_ethtool_get_drvinfo,
.get_ringparam = mvneta_ethtool_get_ringparam,
.set_ringparam = mvneta_ethtool_set_ringparam,
.get_pauseparam = mvneta_ethtool_get_pauseparam,
.set_pauseparam = mvneta_ethtool_set_pauseparam,
.get_strings = mvneta_ethtool_get_strings,
.get_ethtool_stats = mvneta_ethtool_get_stats,
.get_sset_count = mvneta_ethtool_get_sset_count,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment