Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Minor comment fix for misc_64.S
  [POWERPC] Use H_CEDE on non-SMT
  [POWERPC] force 64bit mode in fwnmi handlers to workaround firmware bugs
  [POWERPC] PMAC_APM_EMU should depend on ADB_PMU
  [POWERPC] Fix new interrupt code (MPIC detection)
  [POWERPC] Fix new interrupt code (MPIC endianness)
  [POWERPC] Add cpufreq support for Xserve G5
  [POWERPC] Xserve G5 thermal control fixes
  [POWERPC] Fix mem= handling when the memory limit is > RMO size
  [POWERPC] More offb/bootx fixes
  [POWERPC] Fix legacy_serial.c error handling on 32 bits
  [POWERPC] Fix default clock for udbg_16550
  [POWERPC] Fix non-MPIC CHRPs with CONFIG_SMP set
  [POWERPC] Fix 32 bits warning in prom_init.c
  [POWERPC] Workaround Pegasos incorrect ISA "ranges"
  [POWERPC] fix up front-LED Kconfig

arch/powerpc/Kconfig

@@ -504,7 +504,7 @@ config CPU_FREQ_PMAC
 
 config CPU_FREQ_PMAC64
 	bool "Support for some Apple G5s"
-	depends on CPU_FREQ && PMAC_SMU && PPC64
+	depends on CPU_FREQ && PPC64
 	select CPU_FREQ_TABLE
 	help
 	  This adds support for frequency switching on Apple iMac G5,

arch/powerpc/kernel/head_64.S

@@ -191,6 +191,37 @@ exception_marker:
 	ori	reg,reg,(label)@l;	/* virt addr of handler ... */
 #endif
 
+/*
+ * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode.
+ * The firmware calls the registered system_reset_fwnmi and
+ * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run
+ * a 32bit application at the time of the event.
+ * This firmware bug is present on POWER4 and JS20.
+ */
+#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label)		\
+	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
+	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
+	std	r10,area+EX_R10(r13);					\
+	std	r11,area+EX_R11(r13);					\
+	std	r12,area+EX_R12(r13);					\
+	mfspr	r9,SPRN_SPRG1;						\
+	std	r9,area+EX_R13(r13);					\
+	mfcr	r9;							\
+	clrrdi	r12,r13,32;		/* get high part of &label */	\
+	mfmsr	r10;							\
+	/* force 64bit mode */						\
+	li	r11,5;			/* MSR_SF_LG|MSR_ISF_LG */	\
+	rldimi	r10,r11,61,0;		/* insert into top 3 bits */	\
+	/* done 64bit mode */						\
+	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
+	LOAD_HANDLER(r12,label)						\
+	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
+	mtspr	SPRN_SRR0,r12;						\
+	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
+	mtspr	SPRN_SRR1,r10;						\
+	rfid;								\
+	b	.	/* prevent speculative execution */
+
 #define EXCEPTION_PROLOG_PSERIES(area, label)				\
 	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
 	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
@@ -604,14 +635,14 @@ slb_miss_user_pseries:
 system_reset_fwnmi:
 	HMT_MEDIUM
 	mtspr	SPRN_SPRG1,r13		/* save r13 */
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
+	EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(PACA_EXGEN, system_reset_common)
 
 	.globl machine_check_fwnmi
       .align 7
 machine_check_fwnmi:
 	HMT_MEDIUM
 	mtspr	SPRN_SPRG1,r13		/* save r13 */
-	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
+	EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(PACA_EXMC, machine_check_common)
 
 #ifdef CONFIG_PPC_ISERIES
 /***  ISeries-LPAR interrupt handlers ***/

arch/powerpc/kernel/legacy_serial.c

@@ -112,7 +112,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
 static int __init add_legacy_soc_port(struct device_node *np,
 				      struct device_node *soc_dev)
 {
-	phys_addr_t addr;
+	u64 addr;
 	u32 *addrp;
 	upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
 
@@ -143,7 +143,7 @@ static int __init add_legacy_isa_port(struct device_node *np,
 	u32 *reg;
 	char *typep;
 	int index = -1;
-	phys_addr_t taddr;
+	u64 taddr;
 
 	DBG(" -> add_legacy_isa_port(%s)\n", np->full_name);
 
@@ -165,10 +165,13 @@ static int __init add_legacy_isa_port(struct device_node *np,
 	if (typep && *typep == 'S')
 		index = simple_strtol(typep+1, NULL, 0) - 1;
 
-	/* Translate ISA address */
+	/* Translate ISA address. If it fails, we still register the port
+	 * with no translated address so that it can be picked up as an IO
+	 * port later by the serial driver
+	 */
 	taddr = of_translate_address(np, reg);
 	if (taddr == OF_BAD_ADDR)
-		return -1;
+		taddr = 0;
 
 	/* Add port, irq will be dealt with later */
 	return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr,
@@ -180,7 +183,7 @@ static int __init add_legacy_isa_port(struct device_node *np,
 static int __init add_legacy_pci_port(struct device_node *np,
 				      struct device_node *pci_dev)
 {
-	phys_addr_t addr, base;
+	u64 addr, base;
 	u32 *addrp;
 	unsigned int flags;
 	int iotype, index = -1, lindex = 0;

arch/powerpc/kernel/misc_64.S

@@ -687,7 +687,7 @@ _GLOBAL(kexec_sequence)
 	/* clear out hardware hash page table and tlb */
 	ld	r5,0(r27)		/* deref function descriptor */
 	mtctr	r5
-	bctrl				/* ppc_md.hash_clear_all(void); */
+	bctrl				/* ppc_md.hpte_clear_all(void); */
 
 /*
  *   kexec image calling is:

arch/powerpc/kernel/prom_init.c

@@ -557,7 +557,9 @@ unsigned long prom_memparse(const char *ptr, const char **retptr)
 static void __init early_cmdline_parse(void)
 {
 	struct prom_t *_prom = &RELOC(prom);
+#ifdef CONFIG_PPC64
 	const char *opt;
+#endif
 	char *p;
 	int l = 0;
 
@@ -2030,6 +2032,39 @@ static void __init fixup_device_tree_maple(void)
 #define fixup_device_tree_maple()
 #endif
 
+#ifdef CONFIG_PPC_CHRP
+/* Pegasos lacks the "ranges" property in the isa node */
+static void __init fixup_device_tree_chrp(void)
+{
+	phandle isa;
+	u32 isa_ranges[6];
+	char *name;
+	int rc;
+
+	name = "/pci@80000000/isa@c";
+	isa = call_prom("finddevice", 1, 1, ADDR(name));
+	if (!PHANDLE_VALID(isa))
+		return;
+
+	rc = prom_getproplen(isa, "ranges");
+	if (rc != 0 && rc != PROM_ERROR)
+		return;
+
+	prom_printf("Fixing up missing ISA range on Pegasos...\n");
+
+	isa_ranges[0] = 0x1;
+	isa_ranges[1] = 0x0;
+	isa_ranges[2] = 0x01006000;
+	isa_ranges[3] = 0x0;
+	isa_ranges[4] = 0x0;
+	isa_ranges[5] = 0x00010000;
+	prom_setprop(isa, name, "ranges",
+			isa_ranges, sizeof(isa_ranges));
+}
+#else
+#define fixup_device_tree_chrp()
+#endif
+
 #if defined(CONFIG_PPC64) && defined(CONFIG_PPC_PMAC)
 static void __init fixup_device_tree_pmac(void)
 {
@@ -2077,6 +2112,7 @@ static void __init fixup_device_tree_pmac(void)
 static void __init fixup_device_tree(void)
 {
 	fixup_device_tree_maple();
+	fixup_device_tree_chrp();
 	fixup_device_tree_pmac();
 }
 

arch/powerpc/kernel/smp.c

@@ -144,13 +144,15 @@ void smp_message_recv(int msg, struct pt_regs *regs)
 
 void smp_send_reschedule(int cpu)
 {
-	smp_ops->message_pass(cpu, PPC_MSG_RESCHEDULE);
+	if (likely(smp_ops))
+		smp_ops->message_pass(cpu, PPC_MSG_RESCHEDULE);
 }
 
 #ifdef CONFIG_DEBUGGER
 void smp_send_debugger_break(int cpu)
 {
-	smp_ops->message_pass(cpu, PPC_MSG_DEBUGGER_BREAK);
+	if (likely(smp_ops))
+		smp_ops->message_pass(cpu, PPC_MSG_DEBUGGER_BREAK);
 }
 #endif
 
@@ -158,7 +160,7 @@ void smp_send_debugger_break(int cpu)
 void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *))
 {
 	crash_ipi_function_ptr = crash_ipi_callback;
-	if (crash_ipi_callback) {
+	if (crash_ipi_callback && smp_ops) {
 		mb();
 		smp_ops->message_pass(MSG_ALL_BUT_SELF, PPC_MSG_DEBUGGER_BREAK);
 	}
@@ -220,6 +222,9 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
 	/* Can deadlock when called with interrupts disabled */
 	WARN_ON(irqs_disabled());
 
+	if (unlikely(smp_ops == NULL))
+		return -1;
+
 	data.func = func;
 	data.info = info;
 	atomic_set(&data.started, 0);
@@ -357,7 +362,10 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	smp_store_cpu_info(boot_cpuid);
 	cpu_callin_map[boot_cpuid] = 1;
 
-	max_cpus = smp_ops->probe();
+	if (smp_ops)
+		max_cpus = smp_ops->probe();
+	else
+		max_cpus = 1;
  
 	smp_space_timers(max_cpus);
 
@@ -453,7 +461,7 @@ void generic_mach_cpu_die(void)
 
 static int __devinit cpu_enable(unsigned int cpu)
 {
-	if (smp_ops->cpu_enable)
+	if (smp_ops && smp_ops->cpu_enable)
 		return smp_ops->cpu_enable(cpu);
 
 	return -ENOSYS;
@@ -467,7 +475,8 @@ int __devinit __cpu_up(unsigned int cpu)
 	if (!cpu_enable(cpu))
 		return 0;
 
-	if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu))
+	if (smp_ops == NULL ||
+	    (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu)))
 		return -EINVAL;
 
 	/* Make sure callin-map entry is 0 (can be leftover a CPU
@@ -568,7 +577,8 @@ void __init smp_cpus_done(unsigned int max_cpus)
 	old_mask = current->cpus_allowed;
 	set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid));
 	
-	smp_ops->setup_cpu(boot_cpuid);
+	if (smp_ops)
+		smp_ops->setup_cpu(boot_cpuid);
 
 	set_cpus_allowed(current, old_mask);
 

arch/powerpc/kernel/udbg_16550.c

@@ -81,10 +81,14 @@ static int udbg_550_getc(void)
 void udbg_init_uart(void __iomem *comport, unsigned int speed,
 		    unsigned int clock)
 {
-	unsigned int dll, base_bauds = clock / 16;
+	unsigned int dll, base_bauds;
 
+	if (clock == 0)
+		clock = 1843200;
 	if (speed == 0)
 		speed = 9600;
+
+	base_bauds = clock / 16;
 	dll = base_bauds / speed;
 
 	if (comport) {

arch/powerpc/mm/lmb.c

@@ -320,7 +320,8 @@ void __init lmb_enforce_memory_limit(unsigned long memory_limit)
 		break;
 	}
 
-	lmb.rmo_size = lmb.memory.region[0].size;
+	if (lmb.memory.region[0].size < lmb.rmo_size)
+		lmb.rmo_size = lmb.memory.region[0].size;
 
 	/* And truncate any reserves above the limit also. */
 	for (i = 0; i < lmb.reserved.cnt; i++) {

arch/powerpc/platforms/chrp/setup.c

@@ -291,10 +291,6 @@ void __init chrp_setup_arch(void)
 
 	pci_create_OF_bus_map();
 
-#ifdef CONFIG_SMP
-	smp_ops = &chrp_smp_ops;
-#endif /* CONFIG_SMP */
-
 	/*
 	 * Print the banner, then scroll down so boot progress
 	 * can be printed.  -- Cort
@@ -479,6 +475,14 @@ void __init chrp_init_IRQ(void)
 	chrp_find_openpic();
 	chrp_find_8259();
 
+#ifdef CONFIG_SMP
+	/* Pegasos has no MPIC, those ops would make it crash. It might be an
+	 * option to move setting them to after we probe the PIC though
+	 */
+	if (chrp_mpic != NULL)
+		smp_ops = &chrp_smp_ops;
+#endif /* CONFIG_SMP */
+
 	if (_chrp_type == _CHRP_Pegasos)
 		ppc_md.get_irq        = i8259_irq;
 

arch/powerpc/platforms/maple/setup.c

@@ -221,10 +221,17 @@ static void __init maple_init_IRQ(void)
 	 * in Maple device-tree where the type of the controller is
 	 * open-pic and not interrupt-controller
 	 */
-	for_each_node_by_type(np, "open-pic") {
-		mpic_node = np;
-		break;
-	}
+
+	for_each_node_by_type(np, "interrupt-controller")
+		if (device_is_compatible(np, "open-pic")) {
+			mpic_node = np;
+			break;
+		}
+	if (mpic_node == NULL)
+		for_each_node_by_type(np, "open-pic") {
+			mpic_node = np;
+			break;
+		}
 	if (mpic_node == NULL) {
 		printk(KERN_ERR
 		       "Failed to locate the MPIC interrupt controller\n");
@@ -252,6 +259,8 @@ static void __init maple_init_IRQ(void)
 
 	/* XXX Maple specific bits */
 	flags |= MPIC_BROKEN_U3 | MPIC_WANTS_RESET;
+	/* All U3/U4 are big-endian, older SLOF firmware doesn't encode this */
+	flags |= MPIC_BIG_ENDIAN;
 
 	/* Setup the openpic driver. More device-tree junks, we hard code no
 	 * ISUs for now. I'll have to revisit some stuffs with the folks doing

arch/powerpc/platforms/powermac/bootx_init.c

@@ -181,13 +181,18 @@ static void __init bootx_add_chosen_props(unsigned long base,
 }
 
 static void __init bootx_add_display_props(unsigned long base,
-					   unsigned long *mem_end)
+					   unsigned long *mem_end,
+					   int has_real_node)
 {
 	boot_infos_t *bi = bootx_info;
 	u32 tmp;
 
-	bootx_dt_add_prop("linux,boot-display", NULL, 0, mem_end);
-	bootx_dt_add_prop("linux,opened", NULL, 0, mem_end);
+	if (has_real_node) {
+		bootx_dt_add_prop("linux,boot-display", NULL, 0, mem_end);
+		bootx_dt_add_prop("linux,opened", NULL, 0, mem_end);
+	} else
+		bootx_dt_add_prop("linux,bootx-noscreen", NULL, 0, mem_end);
+
 	tmp = bi->dispDeviceDepth;
 	bootx_dt_add_prop("linux,bootx-depth", &tmp, 4, mem_end);
 	tmp = bi->dispDeviceRect[2] - bi->dispDeviceRect[0];
@@ -241,11 +246,6 @@ static void __init bootx_scan_dt_build_strings(unsigned long base,
 		DBG(" detected display ! adding properties names !\n");
 		bootx_dt_add_string("linux,boot-display", mem_end);
 		bootx_dt_add_string("linux,opened", mem_end);
-		bootx_dt_add_string("linux,bootx-depth", mem_end);
-		bootx_dt_add_string("linux,bootx-width", mem_end);
-		bootx_dt_add_string("linux,bootx-height", mem_end);
-		bootx_dt_add_string("linux,bootx-linebytes", mem_end);
-		bootx_dt_add_string("linux,bootx-addr", mem_end);
 		strncpy(bootx_disp_path, namep, 255);
 	}
 
@@ -329,10 +329,13 @@ static void __init bootx_scan_dt_build_struct(unsigned long base,
 		ppp = &pp->next;
 	}
 
-	if (node == bootx_node_chosen)
+	if (node == bootx_node_chosen) {
 		bootx_add_chosen_props(base, mem_end);
-	if (node == bootx_info->dispDeviceRegEntryOffset)
-		bootx_add_display_props(base, mem_end);
+		if (bootx_info->dispDeviceRegEntryOffset == 0)
+			bootx_add_display_props(base, mem_end, 0);
+	}
+	else if (node == bootx_info->dispDeviceRegEntryOffset)
+		bootx_add_display_props(base, mem_end, 1);
 
 	/* do all our children */
 	cpp = &np->child;
@@ -374,6 +377,14 @@ static unsigned long __init bootx_flatten_dt(unsigned long start)
 	mem_end += 4;
 	bootx_dt_strend = mem_end;
 	bootx_scan_dt_build_strings(base, 4, &mem_end);
+	/* Add some strings */
+	bootx_dt_add_string("linux,bootx-noscreen", &mem_end);
+	bootx_dt_add_string("linux,bootx-depth", &mem_end);
+	bootx_dt_add_string("linux,bootx-width", &mem_end);
+	bootx_dt_add_string("linux,bootx-height", &mem_end);
+	bootx_dt_add_string("linux,bootx-linebytes", &mem_end);
+	bootx_dt_add_string("linux,bootx-addr", &mem_end);
+	/* Wrap up strings */
 	hdr->off_dt_strings = bootx_dt_strbase - mem_start;
 	hdr->dt_strings_size = bootx_dt_strend - bootx_dt_strbase;
 
@@ -471,6 +482,7 @@ void __init bootx_init(unsigned long r3, unsigned long r4)
 	if (bi->dispDeviceDepth == 16)
 		bi->dispDeviceDepth = 15;
 
+
 #ifdef CONFIG_BOOTX_TEXT
 	ptr = (unsigned long)bi->logicalDisplayBase;
 	ptr += bi->dispDeviceRect[1] * bi->dispDeviceRowBytes;
@@ -508,6 +520,7 @@ void __init bootx_init(unsigned long r3, unsigned long r4)
 #ifdef CONFIG_BOOTX_TEXT
 	btext_welcome(bi);
 #endif
+
 	/* New BootX enters kernel with MMU off, i/os are not allowed
 	 * here. This hack will have been done by the boostrap anyway.
 	 */

arch/powerpc/platforms/powermac/cpufreq_64.c

@@ -10,6 +10,8 @@
  * that is iMac G5 and latest single CPU desktop.
  */
 
+#undef DEBUG
+
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/errno.h>
@@ -30,13 +32,7 @@
 #include <asm/smu.h>
 #include <asm/pmac_pfunc.h>
 
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(fmt...) printk(fmt)
-#else
-#define DBG(fmt...)
-#endif
+#define DBG(fmt...) pr_debug(fmt)
 
 /* see 970FX user manual */
 
@@ -82,8 +78,6 @@ static struct freq_attr* g5_cpu_freqs_attr[] = {
 /* Power mode data is an array of the 32 bits PCR values to use for
  * the various frequencies, retrieved from the device-tree
  */
-static u32 *g5_pmode_data;
-static int g5_pmode_max;
 static int g5_pmode_cur;
 
 static void (*g5_switch_volt)(int speed_mode);
@@ -93,6 +87,11 @@ static int (*g5_query_freq)(void);
 static DEFINE_MUTEX(g5_switch_mutex);
 
 
+#ifdef CONFIG_PMAC_SMU
+
+static u32 *g5_pmode_data;
+static int g5_pmode_max;
+
 static struct smu_sdbp_fvt *g5_fvt_table;	/* table of op. points */
 static int g5_fvt_count;			/* number of op. points */
 static int g5_fvt_cur;				/* current op. point */
@@ -209,6 +208,16 @@ static int g5_scom_query_freq(void)
 	return i;
 }
 
+/*
+ * Fake voltage switching for platforms with missing support
+ */
+
+static void g5_dummy_switch_volt(int speed_mode)
+{
+}
+
+#endif /* CONFIG_PMAC_SMU */
+
 /*
  * Platform function based voltage switching for PowerMac7,2 & 7,3
  */
@@ -248,6 +257,9 @@ static int g5_pfunc_switch_freq(int speed_mode)
 	struct pmf_args args;
 	u32 done = 0;
 	unsigned long timeout;
+	int rc;
+
+	DBG("g5_pfunc_switch_freq(%d)\n", speed_mode);
 
 	/* If frequency is going up, first ramp up the voltage */
 	if (speed_mode < g5_pmode_cur)
@@ -255,9 +267,12 @@ static int g5_pfunc_switch_freq(int speed_mode)
 
 	/* Do it */
 	if (speed_mode == CPUFREQ_HIGH)
-		pmf_call_one(pfunc_cpu_setfreq_high, NULL);
+		rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL);
 	else
-		pmf_call_one(pfunc_cpu_setfreq_low, NULL);
+		rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL);
+
+	if (rc)
+		printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc);
 
 	/* It's an irq GPIO so we should be able to just block here,
 	 * I'll do that later after I've properly tested the IRQ code for
@@ -296,13 +311,6 @@ static int g5_pfunc_query_freq(void)
 	return val ? CPUFREQ_HIGH : CPUFREQ_LOW;
 }
 
-/*
- * Fake voltage switching for platforms with missing support
- */
-
-static void g5_dummy_switch_volt(int speed_mode)
-{
-}
 
 /*
  * Common interface to the cpufreq core
@@ -375,6 +383,8 @@ static struct cpufreq_driver g5_cpufreq_driver = {
 };
 
 
+#ifdef CONFIG_PMAC_SMU
+
 static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
 {
 	struct device_node *cpunode;
@@ -525,6 +535,9 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
 	return rc;
 }
 
+#endif /* CONFIG_PMAC_SMU */
+
+
 static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
 {
 	struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL;
@@ -533,6 +546,9 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
 	u64 max_freq, min_freq, ih, il;
 	int has_volt = 1, rc = 0;
 
+	DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and"
+	    " RackMac3,1...\n");
+
 	/* Get first CPU node */
 	for (cpunode = NULL;
 	     (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) {
@@ -636,6 +652,15 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
 	 */
 	ih = *((u32 *)(eeprom + 0x10));
 	il = *((u32 *)(eeprom + 0x20));
+
+	/* Check for machines with no useful settings */
+	if (il == ih) {
+		printk(KERN_WARNING "cpufreq: No low frequency mode available"
+		       " on this model !\n");
+		rc = -ENODEV;
+		goto bail;
+	}
+
 	min_freq = 0;
 	if (ih != 0 && il != 0)
 		min_freq = (max_freq * il) / ih;
@@ -643,7 +668,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
 	/* Sanity check */
 	if (min_freq >= max_freq || min_freq < 1000) {
 		printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n");
-		rc = -ENODEV;
+		rc = -ENXIO;
 		goto bail;
 	}
 	g5_cpu_freqs[0].frequency = max_freq;
@@ -690,16 +715,10 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
 	return rc;
 }
 
-static int __init g5_rm31_cpufreq_init(struct device_node *cpus)
-{
-	/* NYI */
-	return 0;
-}
-
 static int __init g5_cpufreq_init(void)
 {
 	struct device_node *cpus;
-	int rc;
+	int rc = 0;
 
 	cpus = of_find_node_by_path("/cpus");
 	if (cpus == NULL) {
@@ -708,12 +727,13 @@ static int __init g5_cpufreq_init(void)
 	}
 
 	if (machine_is_compatible("PowerMac7,2") ||
-	    machine_is_compatible("PowerMac7,3"))
+	    machine_is_compatible("PowerMac7,3") ||
+	    machine_is_compatible("RackMac3,1"))
 		rc = g5_pm72_cpufreq_init(cpus);
-	else if (machine_is_compatible("RackMac3,1"))
-		rc = g5_rm31_cpufreq_init(cpus);
+#ifdef CONFIG_PMAC_SMU
 	else
 		rc = g5_neo2_cpufreq_init(cpus);
+#endif /* CONFIG_PMAC_SMU */
 
 	of_node_put(cpus);
 	return rc;

arch/powerpc/platforms/pseries/setup.c

@@ -501,7 +501,8 @@ static void pseries_dedicated_idle_sleep(void)
 	}
 
 	/*
-	 * Cede if the other thread is not idle, so that it can
+	 * If not SMT, cede processor.  If CPU is running SMT
+	 * cede if the other thread is not idle, so that it can
 	 * go single-threaded.  If the other thread is idle,
 	 * we ask the hypervisor if it has pending work it
 	 * wants to do and cede if it does.  Otherwise we keep
@@ -514,7 +515,8 @@ static void pseries_dedicated_idle_sleep(void)
 	 * very low priority.  The cede enables interrupts, which
 	 * doesn't matter here.
 	 */
-	if (!lppaca[cpu ^ 1].idle || poll_pending() == H_PENDING)
+	if (!cpu_has_feature(CPU_FTR_SMT) || !lppaca[cpu ^ 1].idle
+	    || poll_pending() == H_PENDING)
 		cede_processor();
 
 out:

drivers/ide/Kconfig

@@ -774,20 +774,6 @@ config BLK_DEV_IDEDMA_PMAC
 	  to transfer data to and from memory.  Saying Y is safe and improves
 	  performance.
 
-config BLK_DEV_IDE_PMAC_BLINK
-	bool "Blink laptop LED on drive activity (DEPRECATED)"
-	depends on BLK_DEV_IDE_PMAC && ADB_PMU
-	select ADB_PMU_LED
-	select LEDS_TRIGGERS
-	select LEDS_TRIGGER_IDE_DISK
-	help
-	  This option enables the use of the sleep LED as a hard drive
-	  activity LED.
-	  This option is deprecated, it only selects ADB_PMU_LED and
-	  LEDS_TRIGGER_IDE_DISK and changes the code in the new led class
-	  device to default to the ide-disk trigger (which should be set
-	  from userspace via sysfs).
-
 config BLK_DEV_IDE_SWARM
 	tristate "IDE for Sibyte evaluation boards"
 	depends on SIBYTE_SB1xxx_SOC

drivers/macintosh/Kconfig

@@ -90,6 +90,15 @@ config ADB_PMU_LED
 	  and the ide-disk LED trigger and configure appropriately through
 	  sysfs.
 
+config ADB_PMU_LED_IDE
+	bool "Use front LED as IDE LED by default"
+	depends on ADB_PMU_LED
+	select LEDS_TRIGGERS
+	select LEDS_TRIGGER_IDE_DISK
+	help
+	  This option makes the front LED default to the IDE trigger
+	  so that it blinks on IDE activity.
+
 config PMAC_SMU
 	bool "Support for SMU  based PowerMacs"
 	depends on PPC_PMAC64
@@ -100,7 +109,7 @@ config PMAC_SMU
 
 config PMAC_APM_EMU
 	tristate "APM emulation"
-	depends on PPC_PMAC && PPC32 && PM
+	depends on PPC_PMAC && PPC32 && PM && ADB_PMU
 
 config PMAC_MEDIABAY
 	bool "Support PowerBook hotswap media bay"

drivers/macintosh/therm_pm72.h

@@ -105,6 +105,7 @@ static char * critical_overtemp_path = "/sbin/critical_overtemp";
 #define DRIVES_DALLAS_ID	0x94
 #define BACKSIDE_MAX_ID		0x98
 #define XSERVE_DIMMS_LM87	0x25a
+#define XSERVE_SLOTS_LM75	0x290
 
 /*
  * Some MAX6690, DS1775, LM87 register definitions
@@ -198,7 +199,7 @@ struct drives_pid_state
 
 #define SLOTS_FAN_PWM_DEFAULT_ID	2
 #define SLOTS_FAN_PWM_INDEX		2
-#define	SLOTS_FAN_DEFAULT_PWM		50 /* Do better here ! */
+#define	SLOTS_FAN_DEFAULT_PWM		40 /* Do better here ! */
 
 
 /*
@@ -206,7 +207,7 @@ struct drives_pid_state
  */
 #define DIMM_PID_G_d			0
 #define DIMM_PID_G_p			0
-#define DIMM_PID_G_r			0x6553600
+#define DIMM_PID_G_r			0x06553600
 #define DIMM_PID_INPUT_TARGET		3276800
 #define DIMM_PID_INTERVAL    		1
 #define DIMM_PID_OUTPUT_MAX		14000
@@ -226,6 +227,31 @@ struct dimm_pid_state
 };
 
 
+/*
+ * PID factors for the Xserve Slots control loop
+ */
+#define SLOTS_PID_G_d			0
+#define SLOTS_PID_G_p			0
+#define SLOTS_PID_G_r			0x00100000
+#define SLOTS_PID_INPUT_TARGET		3200000
+#define SLOTS_PID_INTERVAL    		1
+#define SLOTS_PID_OUTPUT_MAX		100
+#define SLOTS_PID_OUTPUT_MIN		20
+#define SLOTS_PID_HISTORY_SIZE		20
+
+struct slots_pid_state
+{
+	int			ticks;
+	struct i2c_client *	monitor;
+	s32	       		sample_history[SLOTS_PID_HISTORY_SIZE];
+	s32			error_history[SLOTS_PID_HISTORY_SIZE];
+	int			cur_sample;
+	s32			last_temp;
+	int			first;
+	int			pwm;
+};
+
+
 
 /* Desktops */
 
@@ -283,6 +309,9 @@ struct cpu_pid_state
 	s32			pump_max;
 };
 
+/* Tickle FCU every 10 seconds */
+#define FCU_TICKLE_TICKS	10
+
 /*
  * Driver state
  */

drivers/macintosh/via-pmu-led.c

@@ -74,7 +74,7 @@ static void pmu_led_set(struct led_classdev *led_cdev,
 
 static struct led_classdev pmu_led = {
 	.name = "pmu-front-led",
-#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK
+#ifdef CONFIG_ADB_PMU_LED_IDE
 	.default_trigger = "ide-disk",
 #endif
 	.brightness_set = pmu_led_set,