Commit 49f29090 authored by Tejun Heo's avatar Tejun Heo Committed by Jeff Garzik

ahci: update PCS programming

For intel ones, ahci unconditionally OR'd 0xf to PCS.  This isn't
correct for the following cases.

* ich6/7m's which only implement P0 and P2 (0xf works fine tho)

* ich8/9's which have six ports and needs 0x3f to enable all ports

This patch updates PCS programming such that...

* port_map determined by ahci_save_initial_config() is OR'd instead of 0xf

* PCS is updated only if necessary (there are turned off enable bits)

port_map is determined from PORTS_IMPL PCI register which is
implemented as write or write-once register.  If the register isn't
programmed, ahci automatically generates it from number of ports,
which is good enough for PCS programming.  ICH6/7M are probably the
only ones where non-contiguous enable bits are necessary && PORTS_IMPL
isn't programmed properly but they're proven to work reliably with 0xf
anyway.
Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent 51dbd490
...@@ -1036,6 +1036,7 @@ static int ahci_deinit_port(struct ata_port *ap, const char **emsg) ...@@ -1036,6 +1036,7 @@ static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
static int ahci_reset_controller(struct ata_host *host) static int ahci_reset_controller(struct ata_host *host)
{ {
struct pci_dev *pdev = to_pci_dev(host->dev); struct pci_dev *pdev = to_pci_dev(host->dev);
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
u32 tmp; u32 tmp;
...@@ -1078,8 +1079,10 @@ static int ahci_reset_controller(struct ata_host *host) ...@@ -1078,8 +1079,10 @@ static int ahci_reset_controller(struct ata_host *host)
/* configure PCS */ /* configure PCS */
pci_read_config_word(pdev, 0x92, &tmp16); pci_read_config_word(pdev, 0x92, &tmp16);
tmp16 |= 0xf; if ((tmp16 & hpriv->port_map) != hpriv->port_map) {
pci_write_config_word(pdev, 0x92, tmp16); tmp16 |= hpriv->port_map;
pci_write_config_word(pdev, 0x92, tmp16);
}
} }
return 0; return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment