Commit 4acf6d7f authored by Srinivas Kandagatla's avatar Srinivas Kandagatla Committed by Mark Brown

ASoC: qcom: document apq8016 sbc machine driver bindings

This patch adds bindings for apq8016 sbc machine driver.
APQ8016 has 4 MI2S which can be configured to different sinks like
internal codec/external codec, this connection and various parameters
are controlled via 2 iomux registers.
Acked-by: default avatarKenneth Westfield <kwestfie@codeaurora.org>
Signed-off-by: default avatarSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 2682c7c7
* Qualcomm Technologies APQ8016 SBC ASoC machine driver
This node models the Qualcomm Technologies APQ8016 SBC ASoC machine driver
Required properties:
- compatible : "qcom,apq8016-sbc-sndcard"
- pinctrl-N : One property must exist for each entry in
pinctrl-names. See ../pinctrl/pinctrl-bindings.txt
for details of the property values.
- pinctrl-names : Must contain a "default" entry.
- reg : Must contain an address for each entry in reg-names.
- reg-names : A list which must include the following entries:
* "mic-iomux"
* "spkr-iomux"
- qcom,model : Name of the sound card.
Dai-link subnode properties and subnodes:
Required dai-link subnodes:
- cpu : CPU sub-node
- codec : CODEC sub-node
Required CPU/CODEC subnodes properties:
-link-name : Name of the dai link.
-sound-dai : phandle and port of CPU/CODEC
-capture-dai : phandle and port of CPU/CODEC
Example:
sound: sound {
compatible = "qcom,apq8016-sbc-sndcard";
reg = <0x07702000 0x4>, <0x07702004 0x4>;
reg-names = "mic-iomux", "spkr-iomux";
qcom,model = "DB410c";
/* I2S - Internal codec */
internal-dai-link@0 {
cpu { /* PRIMARY */
sound-dai = <&lpass MI2S_PRIMARY>;
};
codec {
sound-dai = <&wcd_codec 0>;
};
};
/* External Primary or External Secondary -ADV7533 HDMI */
external-dai-link@0 {
link-name = "ADV7533";
cpu { /* QUAT */
sound-dai = <&lpass MI2S_QUATERNARY>;
};
codec {
sound-dai = <&adv_bridge 0>;
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment