PM: Change hibernation code ordering

Change the ordering of the hibernation core code so that the platform
"prepare" callbacks are executed and the nonboot CPUs are disabled
after calling device drivers' "late suspend" methods.

This change (along with the previous analogous change of the suspend
core code) will allow us to rework the PCI PM core so that the power
state of devices is changed in the "late" phase of suspend (and
analogously in the "early" phase of resume), which in turn will allow
us to avoid the race condition where a device using shared interrupts
is put into a low power state with interrupts enabled and then an
interrupt (for another device) comes in and confuses its driver.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>

kernel/power/disk.c

@@ -228,13 +228,22 @@ static int create_image(int platform_mode)
 		goto Unlock;
 	}
 
+	error = platform_pre_snapshot(platform_mode);
+	if (error || hibernation_test(TEST_PLATFORM))
+		goto Platform_finish;
+
+	error = disable_nonboot_cpus();
+	if (error || hibernation_test(TEST_CPUS)
+	    || hibernation_testmode(HIBERNATION_TEST))
+		goto Enable_cpus;
+
 	local_irq_disable();
 
 	sysdev_suspend(PMSG_FREEZE);
 	if (error) {
 		printk(KERN_ERR "PM: Some devices failed to power down, "
 			"aborting hibernation\n");
-		goto Power_up_devices;
+		goto Enable_irqs;
 	}
 
 	if (hibernation_test(TEST_CORE))
@@ -250,15 +259,22 @@ static int create_image(int platform_mode)
 	restore_processor_state();
 	if (!in_suspend)
 		platform_leave(platform_mode);
+
  Power_up:
 	sysdev_resume();
 	/* NOTE:  device_power_up() is just a resume() for devices
 	 * that suspended with irqs off ... no overall powerup.
 	 */
 
- Power_up_devices:
+ Enable_irqs:
 	local_irq_enable();
 
+ Enable_cpus:
+	enable_nonboot_cpus();
+
+ Platform_finish:
+	platform_finish(platform_mode);
+
 	device_power_up(in_suspend ?
 		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
 
@@ -298,25 +314,9 @@ int hibernation_snapshot(int platform_mode)
 	if (hibernation_test(TEST_DEVICES))
 		goto Recover_platform;
 
-	error = platform_pre_snapshot(platform_mode);
-	if (error || hibernation_test(TEST_PLATFORM))
-		goto Finish;
-
-	error = disable_nonboot_cpus();
-	if (!error) {
-		if (hibernation_test(TEST_CPUS))
-			goto Enable_cpus;
-
-		if (hibernation_testmode(HIBERNATION_TEST))
-			goto Enable_cpus;
+	error = create_image(platform_mode);
+	/* Control returns here after successful restore */
 
-		error = create_image(platform_mode);
-		/* Control returns here after successful restore */
-	}
- Enable_cpus:
-	enable_nonboot_cpus();
- Finish:
-	platform_finish(platform_mode);
  Resume_devices:
 	device_resume(in_suspend ?
 		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
@@ -338,7 +338,7 @@ int hibernation_snapshot(int platform_mode)
  *	kernel.
  */
 
-static int resume_target_kernel(void)
+static int resume_target_kernel(bool platform_mode)
 {
 	int error;
 
@@ -351,9 +351,20 @@ static int resume_target_kernel(void)
 		goto Unlock;
 	}
 
+	error = platform_pre_restore(platform_mode);
+	if (error)
+		goto Cleanup;
+
+	error = disable_nonboot_cpus();
+	if (error)
+		goto Enable_cpus;
+
 	local_irq_disable();
 
-	sysdev_suspend(PMSG_QUIESCE);
+	error = sysdev_suspend(PMSG_QUIESCE);
+	if (error)
+		goto Enable_irqs;
+
 	/* We'll ignore saved state, but this gets preempt count (etc) right */
 	save_processor_state();
 	error = restore_highmem();
@@ -379,8 +390,15 @@ static int resume_target_kernel(void)
 
 	sysdev_resume();
 
+ Enable_irqs:
 	local_irq_enable();
 
+ Enable_cpus:
+	enable_nonboot_cpus();
+
+ Cleanup:
+	platform_restore_cleanup(platform_mode);
+
 	device_power_up(PMSG_RECOVER);
 
  Unlock:
@@ -405,19 +423,10 @@ int hibernation_restore(int platform_mode)
 	pm_prepare_console();
 	suspend_console();
 	error = device_suspend(PMSG_QUIESCE);
-	if (error)
-		goto Finish;
-
-	error = platform_pre_restore(platform_mode);
 	if (!error) {
-		error = disable_nonboot_cpus();
-		if (!error)
-			error = resume_target_kernel();
-		enable_nonboot_cpus();
+		error = resume_target_kernel(platform_mode);
+		device_resume(PMSG_RECOVER);
 	}
-	platform_restore_cleanup(platform_mode);
-	device_resume(PMSG_RECOVER);
- Finish:
 	resume_console();
 	pm_restore_console();
 	return error;
@@ -453,34 +462,38 @@ int hibernation_platform_enter(void)
 		goto Resume_devices;
 	}
 
+	device_pm_lock();
+
+	error = device_power_down(PMSG_HIBERNATE);
+	if (error)
+		goto Unlock;
+
 	error = hibernation_ops->prepare();
 	if (error)
-		goto Resume_devices;
+		goto Platofrm_finish;
 
 	error = disable_nonboot_cpus();
 	if (error)
-		goto Finish;
-
-	device_pm_lock();
-
-	error = device_power_down(PMSG_HIBERNATE);
-	if (!error) {
-		local_irq_disable();
-		sysdev_suspend(PMSG_HIBERNATE);
-		hibernation_ops->enter();
-		/* We should never get here */
-		while (1);
-	}
+		goto Platofrm_finish;
 
-	device_pm_unlock();
+	local_irq_disable();
+	sysdev_suspend(PMSG_HIBERNATE);
+	hibernation_ops->enter();
+	/* We should never get here */
+	while (1);
 
 	/*
 	 * We don't need to reenable the nonboot CPUs or resume consoles, since
 	 * the system is going to be halted anyway.
 	 */
- Finish:
+ Platofrm_finish:
 	hibernation_ops->finish();
 
+	device_power_up(PMSG_RESTORE);
+
+ Unlock:
+	device_pm_unlock();
+
  Resume_devices:
 	entering_platform_hibernation = false;
 	device_resume(PMSG_RESTORE);