Merge git://git.kernel.org/pub/scm/linux/kernel/git/nico/orion into devel-stable

arch/arm/configs/kirkwood_defconfig

@@ -15,6 +15,7 @@ CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_ESATA_SHEEVAPLUG=y
 CONFIG_MACH_GURUPLUG=y
+CONFIG_MACH_DOCKSTAR=y
 CONFIG_MACH_TS219=y
 CONFIG_MACH_TS41X=y
 CONFIG_MACH_OPENRD_BASE=y

arch/arm/mach-kirkwood/Kconfig

@@ -58,6 +58,12 @@ config MACH_TS41X
 	  QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
 	  devices.
 
+config MACH_DOCKSTAR
+	bool "Seagate FreeAgent DockStar"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Seagate FreeAgent DockStar.
+
 config MACH_OPENRD
         bool
 
@@ -100,6 +106,12 @@ config MACH_NETSPACE_MAX_V2
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie Network Space Max v2 NAS.
 
+config MACH_D2NET_V2
+	bool "LaCie d2 Network v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie d2 Network v2 NAS.
+
 config MACH_NET2BIG_V2
 	bool "LaCie 2Big Network v2 NAS Board"
 	help

arch/arm/mach-kirkwood/Makefile

@@ -7,14 +7,16 @@ obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_GURUPLUG)		+= guruplug-setup.o
+obj-$(CONFIG_MACH_DOCKSTAR)		+= dockstar-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_OPENRD)		+= openrd-setup.o
-obj-$(CONFIG_MACH_NETSPACE_V2)		+= netspace_v2-setup.o
-obj-$(CONFIG_MACH_INETSPACE_V2)		+= netspace_v2-setup.o
-obj-$(CONFIG_MACH_NETSPACE_MAX_V2)	+= netspace_v2-setup.o
-obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o
-obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o
+obj-$(CONFIG_MACH_NETSPACE_V2)		+= netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_INETSPACE_V2)		+= netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NETSPACE_MAX_V2)	+= netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_D2NET_V2)		+= d2net_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
 obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o

arch/arm/mach-kirkwood/d2net_v2-setup.c

+/*
+ * arch/arm/mach-kirkwood/d2net_v2-setup.c
+ *
+ * LaCie d2 Network Space v2 Board Setup
+ *
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <mach/leds-ns2.h>
+#include "common.h"
+#include "mpp.h"
+#include "lacie_v2-common.h"
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data d2net_v2_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data d2net_v2_sata_data = {
+	.n_ports	= 2,
+};
+
+/*****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define D2NET_V2_GPIO_PUSH_BUTTON          34
+#define D2NET_V2_GPIO_POWER_SWITCH_ON      13
+#define D2NET_V2_GPIO_POWER_SWITCH_OFF     15
+
+#define D2NET_V2_SWITCH_POWER_ON           0x1
+#define D2NET_V2_SWITCH_POWER_OFF          0x2
+
+static struct gpio_keys_button d2net_v2_buttons[] = {
+	[0] = {
+		.type           = EV_SW,
+		.code           = D2NET_V2_SWITCH_POWER_ON,
+		.gpio           = D2NET_V2_GPIO_POWER_SWITCH_ON,
+		.desc           = "Back power switch (on|auto)",
+		.active_low     = 0,
+	},
+	[1] = {
+		.type           = EV_SW,
+		.code           = D2NET_V2_SWITCH_POWER_OFF,
+		.gpio           = D2NET_V2_GPIO_POWER_SWITCH_OFF,
+		.desc           = "Back power switch (auto|off)",
+		.active_low     = 0,
+	},
+	[2] = {
+		.code           = KEY_POWER,
+		.gpio           = D2NET_V2_GPIO_PUSH_BUTTON,
+		.desc           = "Front Push Button",
+		.active_low     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data d2net_v2_button_data = {
+	.buttons	= d2net_v2_buttons,
+	.nbuttons	= ARRAY_SIZE(d2net_v2_buttons),
+};
+
+static struct platform_device d2net_v2_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &d2net_v2_button_data,
+	},
+};
+
+/*****************************************************************************
+ * GPIO LEDs
+ ****************************************************************************/
+
+#define D2NET_V2_GPIO_RED_LED		12
+
+static struct gpio_led d2net_v2_gpio_led_pins[] = {
+	{
+		.name	= "d2net_v2:red:fail",
+		.gpio	= D2NET_V2_GPIO_RED_LED,
+	},
+};
+
+static struct gpio_led_platform_data d2net_v2_gpio_leds_data = {
+	.num_leds	= ARRAY_SIZE(d2net_v2_gpio_led_pins),
+	.leds		= d2net_v2_gpio_led_pins,
+};
+
+static struct platform_device d2net_v2_gpio_leds = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &d2net_v2_gpio_leds_data,
+	},
+};
+
+/*****************************************************************************
+ * Dual-GPIO CPLD LEDs
+ ****************************************************************************/
+
+#define D2NET_V2_GPIO_BLUE_LED_SLOW	29
+#define D2NET_V2_GPIO_BLUE_LED_CMD	30
+
+static struct ns2_led d2net_v2_led_pins[] = {
+	{
+		.name	= "d2net_v2:blue:sata",
+		.cmd	= D2NET_V2_GPIO_BLUE_LED_CMD,
+		.slow	= D2NET_V2_GPIO_BLUE_LED_SLOW,
+	},
+};
+
+static struct ns2_led_platform_data d2net_v2_leds_data = {
+	.num_leds	= ARRAY_SIZE(d2net_v2_led_pins),
+	.leds		= d2net_v2_led_pins,
+};
+
+static struct platform_device d2net_v2_leds = {
+	.name		= "leds-ns2",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &d2net_v2_leds_data,
+	},
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static unsigned int d2net_v2_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP6_SYSRST_OUTn,
+	MPP7_GPO,		/* Request power-off */
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP12_GPO,		/* Red led */
+	MPP13_GPIO,		/* Rear power switch (on|auto) */
+	MPP14_GPIO,		/* USB fuse */
+	MPP15_GPIO,		/* Rear power switch (auto|off) */
+	MPP16_GPIO,		/* SATA 0 power */
+	MPP21_SATA0_ACTn,
+	MPP24_GPIO,		/* USB mode select */
+	MPP26_GPIO,		/* USB device vbus */
+	MPP28_GPIO,		/* USB enable host vbus */
+	MPP29_GPIO,		/* Blue led (slow register) */
+	MPP30_GPIO,		/* Blue led (command register) */
+	MPP34_GPIO,		/* Power button (1 = Released, 0 = Pushed) */
+	MPP35_GPIO,		/* Inhibit power-off */
+	0
+};
+
+#define D2NET_V2_GPIO_POWER_OFF		7
+
+static void d2net_v2_power_off(void)
+{
+	gpio_set_value(D2NET_V2_GPIO_POWER_OFF, 1);
+}
+
+static void __init d2net_v2_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(d2net_v2_mpp_config);
+
+	lacie_v2_hdd_power_init(1);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&d2net_v2_ge00_data);
+	kirkwood_sata_init(&d2net_v2_sata_data);
+	kirkwood_uart0_init();
+	lacie_v2_register_flash();
+	lacie_v2_register_i2c_devices();
+
+	platform_device_register(&d2net_v2_leds);
+	platform_device_register(&d2net_v2_gpio_leds);
+	platform_device_register(&d2net_v2_gpio_buttons);
+
+	if (gpio_request(D2NET_V2_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(D2NET_V2_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = d2net_v2_power_off;
+	else
+		pr_err("d2net_v2: failed to configure power-off GPIO\n");
+}
+
+MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= d2net_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &lacie_v2_timer,
+MACHINE_END

arch/arm/mach-kirkwood/dockstar-setup.c

+/*
+ * arch/arm/mach-kirkwood/dockstar-setup.c
+ *
+ * Seagate FreeAgent DockStar Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition dockstar_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data dockstar_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct gpio_led dockstar_led_pins[] = {
+	{
+		.name			= "dockstar:green:health",
+		.default_trigger	= "default-on",
+		.gpio			= 46,
+		.active_low		= 1,
+	},
+	{
+		.name			= "dockstar:orange:misc",
+		.default_trigger	= "none",
+		.gpio			= 47,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data dockstar_led_data = {
+	.leds		= dockstar_led_pins,
+	.num_leds	= ARRAY_SIZE(dockstar_led_pins),
+};
+
+static struct platform_device dockstar_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &dockstar_led_data,
+	}
+};
+
+static unsigned int dockstar_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP46_GPIO,	/* LED green */
+	MPP47_GPIO,	/* LED orange */
+	0
+};
+
+static void __init dockstar_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+
+	/* setup gpio pin select */
+	kirkwood_mpp_conf(dockstar_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25);
+
+	if (gpio_request(29, "USB Power Enable") != 0 ||
+	    gpio_direction_output(29, 1) != 0)
+		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&dockstar_ge00_data);
+
+	platform_device_register(&dockstar_leds);
+}
+
+MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= dockstar_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END

arch/arm/mach-kirkwood/include/mach/leds-netxbig.h

+/*
+ * arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
+ *
+ * Platform data structure for netxbig LED driver
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_LEDS_NETXBIG_H
+#define __MACH_LEDS_NETXBIG_H
+
+struct netxbig_gpio_ext {
+	unsigned	*addr;
+	int		num_addr;
+	unsigned	*data;
+	int		num_data;
+	unsigned	enable;
+};
+
+enum netxbig_led_mode {
+	NETXBIG_LED_OFF,
+	NETXBIG_LED_ON,
+	NETXBIG_LED_SATA,
+	NETXBIG_LED_TIMER1,
+	NETXBIG_LED_TIMER2,
+	NETXBIG_LED_MODE_NUM,
+};
+
+#define NETXBIG_LED_INVALID_MODE NETXBIG_LED_MODE_NUM
+
+struct netxbig_led_timer {
+	unsigned long		delay_on;
+	unsigned long		delay_off;
+	enum netxbig_led_mode	mode;
+};
+
+struct netxbig_led {
+	const char	*name;
+	const char	*default_trigger;
+	int		mode_addr;
+	int		*mode_val;
+	int		bright_addr;
+};
+
+struct netxbig_led_platform_data {
+	struct netxbig_gpio_ext	*gpio_ext;
+	struct netxbig_led_timer *timer;
+	int			num_timer;
+	struct netxbig_led	*leds;
+	int			num_leds;
+};
+
+#endif /* __MACH_LEDS_NETXBIG_H */

arch/arm/mach-kirkwood/lacie_v2-common.c

+/*
+ * arch/arm/mach-kirkwood/lacie_v2-common.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/gpio.h>
+#include <asm/mach/time.h>
+#include <mach/kirkwood.h>
+#include <mach/irqs.h>
+#include <plat/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
+ ****************************************************************************/
+
+static struct mtd_partition lacie_v2_flash_parts[] = {
+	{
+		.name = "u-boot",
+		.size = MTDPART_SIZ_FULL,
+		.offset = 0,
+		.mask_flags = MTD_WRITEABLE, /* force read-only */
+	},
+};
+
+static const struct flash_platform_data lacie_v2_flash = {
+	.type		= "mx25l4005a",
+	.name		= "spi_flash",
+	.parts		= lacie_v2_flash_parts,
+	.nr_parts	= ARRAY_SIZE(lacie_v2_flash_parts),
+};
+
+static struct spi_board_info __initdata lacie_v2_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &lacie_v2_flash,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+void __init lacie_v2_register_flash(void)
+{
+	spi_register_board_info(lacie_v2_spi_slave_info,
+				ARRAY_SIZE(lacie_v2_spi_slave_info));
+	kirkwood_spi_init();
+}
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+static struct at24_platform_data at24c04 = {
+	.byte_len	= SZ_4K / 8,
+	.page_size	= 16,
+};
+
+/*
+ * i2c addr | chip         | description
+ * 0x50     | HT24LC04     | eeprom (512B)
+ */
+
+static struct i2c_board_info __initdata lacie_v2_i2c_info[] = {
+	{
+		I2C_BOARD_INFO("24c04", 0x50),
+		.platform_data  = &at24c04,
+	}
+};
+
+void __init lacie_v2_register_i2c_devices(void)
+{
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, lacie_v2_i2c_info,
+				ARRAY_SIZE(lacie_v2_i2c_info));
+}
+
+/*****************************************************************************
+ * Hard Disk power
+ ****************************************************************************/
+
+static int __initdata lacie_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };
+
+void __init lacie_v2_hdd_power_init(int hdd_num)
+{
+	int i;
+	int err;
+
+	/* Power up all hard disks. */
+	for (i = 0; i < hdd_num; i++) {
+		err = gpio_request(lacie_v2_gpio_hdd_power[i], NULL);
+		if (err == 0) {
+			err = gpio_direction_output(
+					lacie_v2_gpio_hdd_power[i], 1);
+			/* Free the HDD power GPIOs. This allow user-space to
+			 * configure them via the gpiolib sysfs interface. */
+			gpio_free(lacie_v2_gpio_hdd_power[i]);
+		}
+		if (err)
+			pr_err("Failed to power up HDD%d\n", i + 1);
+	}
+}
+
+/*****************************************************************************
+ * Timer
+ ****************************************************************************/
+
+static void lacie_v2_timer_init(void)
+{
+	kirkwood_tclk = 166666667;
+	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
+}
+
+struct sys_timer lacie_v2_timer = {
+	.init = lacie_v2_timer_init,
+};

arch/arm/mach-kirkwood/lacie_v2-common.h

+/*
+ * arch/arm/mach-kirkwood/lacie_v2-common.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
+#define __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
+
+void lacie_v2_register_flash(void);
+void lacie_v2_register_i2c_devices(void);
+void lacie_v2_hdd_power_init(int hdd_num);
+
+extern struct sys_timer lacie_v2_timer;
+
+#endif

arch/arm/mach-kirkwood/netspace_v2-setup.c

@@ -24,56 +24,19 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/leds.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
 #include <mach/kirkwood.h>
 #include <mach/leds-ns2.h>
-#include <plat/time.h>
 #include "common.h"
 #include "mpp.h"
-
-/*****************************************************************************
- * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
- ****************************************************************************/
-
-static struct mtd_partition netspace_v2_flash_parts[] = {
-	{
-		.name = "u-boot",
-		.size = MTDPART_SIZ_FULL,
-		.offset = 0,
-		.mask_flags = MTD_WRITEABLE, /* force read-only */
-	},
-};
-
-static const struct flash_platform_data netspace_v2_flash = {
-	.type		= "mx25l4005a",
-	.name		= "spi_flash",
-	.parts		= netspace_v2_flash_parts,
-	.nr_parts	= ARRAY_SIZE(netspace_v2_flash_parts),
-};
-
-static struct spi_board_info __initdata netspace_v2_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &netspace_v2_flash,
-		.irq		= -1,
-		.max_speed_hz	= 20000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
+#include "lacie_v2-common.h"
 
 /*****************************************************************************
  * Ethernet
@@ -83,27 +46,6 @@ static struct mv643xx_eth_platform_data netspace_v2_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
-/*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-static struct at24_platform_data at24c04 = {
-	.byte_len	= SZ_4K / 8,
-	.page_size	= 16,
-};
-
-/*
- * i2c addr | chip         | description
- * 0x50     | HT24LC04     | eeprom (512B)
- */
-
-static struct i2c_board_info __initdata netspace_v2_i2c_info[] = {
-	{
-		I2C_BOARD_INFO("24c04", 0x50),
-		.platform_data  = &at24c04,
-	}
-};
-
 /*****************************************************************************
  * SATA
  ****************************************************************************/
@@ -112,35 +54,6 @@ static struct mv_sata_platform_data netspace_v2_sata_data = {
 	.n_ports	= 2,
 };
 
-#define NETSPACE_V2_GPIO_SATA0_POWER	16
-#define NETSPACE_V2_GPIO_SATA1_POWER	17
-
-static void __init netspace_v2_sata_power_init(void)
-{
-	int err;
-
-	err = gpio_request(NETSPACE_V2_GPIO_SATA0_POWER, "SATA0 power");
-	if (err == 0) {
-		err = gpio_direction_output(NETSPACE_V2_GPIO_SATA0_POWER, 1);
-		if (err)
-			gpio_free(NETSPACE_V2_GPIO_SATA0_POWER);
-	}
-	if (err)
-		pr_err("netspace_v2: failed to setup SATA0 power\n");
-
-	if (machine_is_netspace_max_v2()) {
-		err = gpio_request(NETSPACE_V2_GPIO_SATA1_POWER, "SATA1 power");
-		if (err == 0) {
-			err = gpio_direction_output(
-					NETSPACE_V2_GPIO_SATA1_POWER, 1);
-			if (err)
-				gpio_free(NETSPACE_V2_GPIO_SATA1_POWER);
-		}
-		if (err)
-			pr_err("netspace_v2: failed to setup SATA1 power\n");
-	}
-}
-
 /*****************************************************************************
  * GPIO keys
  ****************************************************************************/
@@ -223,20 +136,6 @@ static struct platform_device netspace_v2_leds = {
 	},
 };
 
-/*****************************************************************************
- * Timer
- ****************************************************************************/
-
-static void netspace_v2_timer_init(void)
-{
-	kirkwood_tclk = 166666667;
-	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
-
-struct sys_timer netspace_v2_timer = {
-	.init = netspace_v2_timer_init,
-};
-
 /*****************************************************************************
  * General Setup
  ****************************************************************************/
@@ -291,18 +190,17 @@ static void __init netspace_v2_init(void)
 	kirkwood_init();
 	kirkwood_mpp_conf(netspace_v2_mpp_config);
 
-	netspace_v2_sata_power_init();
+	if (machine_is_netspace_max_v2())
+		lacie_v2_hdd_power_init(2);
+	else
+		lacie_v2_hdd_power_init(1);
 
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&netspace_v2_ge00_data);
 	kirkwood_sata_init(&netspace_v2_sata_data);
 	kirkwood_uart0_init();
-	spi_register_board_info(netspace_v2_spi_slave_info,
-				ARRAY_SIZE(netspace_v2_spi_slave_info));
-	kirkwood_spi_init();
-	kirkwood_i2c_init();
-	i2c_register_board_info(0, netspace_v2_i2c_info,
-				ARRAY_SIZE(netspace_v2_i2c_info));
+	lacie_v2_register_flash();
+	lacie_v2_register_i2c_devices();
 
 	platform_device_register(&netspace_v2_leds);
 	platform_device_register(&netspace_v2_gpio_leds);
@@ -323,7 +221,7 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &netspace_v2_timer,
+	.timer		= &lacie_v2_timer,
 MACHINE_END
 #endif
 
@@ -335,7 +233,7 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &netspace_v2_timer,
+	.timer		= &lacie_v2_timer,
 MACHINE_END
 #endif
 
@@ -347,6 +245,6 @@ MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &netspace_v2_timer,
+	.timer		= &lacie_v2_timer,
 MACHINE_END
 #endif

arch/arm/mach-kirkwood/openrd-setup.c

@@ -16,6 +16,7 @@
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/i2c.h>
+#include <linux/gpio.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
@@ -57,7 +58,22 @@ static struct mvsdio_platform_data openrd_mvsdio_data = {
 };
 
 static unsigned int openrd_mpp_config[] __initdata = {
+	MPP12_SD_CLK,
+	MPP13_SD_CMD,
+	MPP14_SD_D0,
+	MPP15_SD_D1,
+	MPP16_SD_D2,
+	MPP17_SD_D3,
+	MPP28_GPIO,
 	MPP29_GPIO,
+	MPP34_GPIO,
+	0
+};
+
+/* Configure MPP for UART1 */
+static unsigned int openrd_uart1_mpp_config[] __initdata = {
+	MPP13_UART1_TXD,
+	MPP14_UART1_RXD,
 	0
 };
 
@@ -67,6 +83,68 @@ static struct i2c_board_info i2c_board_info[] __initdata = {
 	},
 };
 
+static int __initdata uart1;
+
+static int __init sd_uart_selection(char *str)
+{
+	uart1 = -EINVAL;
+
+	/* Default is SD. Change if required, for UART */
+	if (!str)
+		return 0;
+
+	if (!strncmp(str, "232", 3)) {
+		uart1 = 232;
+	} else if (!strncmp(str, "485", 3)) {
+		/* OpenRD-Base doesn't have RS485. Treat is as an
+		 * unknown argument & just have default setting -
+		 * which is SD */
+		if (machine_is_openrd_base()) {
+			uart1 = -ENODEV;
+			return 1;
+		}
+
+		uart1 = 485;
+	}
+	return 1;
+}
+/* Parse boot_command_line string kw_openrd_init_uart1=232/485 */
+__setup("kw_openrd_init_uart1=", sd_uart_selection);
+
+static int __init uart1_mpp_config(void)
+{
+	kirkwood_mpp_conf(openrd_uart1_mpp_config);
+
+	if (gpio_request(34, "SD_UART1_SEL")) {
+		printk(KERN_ERR "GPIO request failed for SD/UART1 selection"
+				", gpio: 34\n");
+		return -EIO;
+	}
+
+	if (gpio_request(28, "RS232_RS485_SEL")) {
+		printk(KERN_ERR "GPIO request failed for RS232/RS485 selection"
+				", gpio# 28\n");
+		gpio_free(34);
+		return -EIO;
+	}
+
+	/* Select UART1
+	 * Pin # 34: 0 => UART1, 1 => SD */
+	gpio_direction_output(34, 0);
+
+	/* Select RS232 OR RS485
+	 * Pin # 28: 0 => RS232, 1 => RS485 */
+	if (uart1 == 232)
+		gpio_direction_output(28, 0);
+	else
+		gpio_direction_output(28, 1);
+
+	gpio_free(34);
+	gpio_free(28);
+
+	return 0;
+}
+
 static void __init openrd_init(void)
 {
 	/*
@@ -90,7 +168,6 @@ static void __init openrd_init(void)
 		kirkwood_ge01_init(&openrd_ge01_data);
 
 	kirkwood_sata_init(&openrd_sata_data);
-	kirkwood_sdio_init(&openrd_mvsdio_data);
 
 	kirkwood_i2c_init();
 
@@ -99,6 +176,28 @@ static void __init openrd_init(void)
 			ARRAY_SIZE(i2c_board_info));
 		kirkwood_audio_init();
 	}
+
+	if (uart1 <= 0) {
+		if (uart1 < 0)
+			printk(KERN_ERR "Invalid kernel parameter to select "
+				"UART1. Defaulting to SD. ERROR CODE: %d\n",
+				uart1);
+
+		/* Select SD
+		 * Pin # 34: 0 => UART1, 1 => SD */
+		if (gpio_request(34, "SD_UART1_SEL")) {
+			printk(KERN_ERR "GPIO request failed for SD/UART1 "
+					"selection, gpio: 34\n");
+		} else {
+
+			gpio_direction_output(34, 1);
+			gpio_free(34);
+			kirkwood_sdio_init(&openrd_mvsdio_data);
+		}
+	} else {
+		if (!uart1_mpp_config())
+			kirkwood_uart1_init();
+	}
 }
 
 static int __init openrd_pci_init(void)

drivers/leds/Kconfig

@@ -304,13 +304,22 @@ config LEDS_MC13783
 
 config LEDS_NS2
 	tristate "LED support for Network Space v2 GPIO LEDs"
-	depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2
+	depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2 || D2NET_V2
 	default y
 	help
 	  This option enable support for the dual-GPIO LED found on the
 	  Network Space v2 board (and parents). This include Internet Space v2,
 	  Network Space (Max) v2 and d2 Network v2 boards.
 
+config LEDS_NETXBIG
+	tristate "LED support for Big Network series LEDs"
+	depends on MACH_NET2BIG_V2 || MACH_NET5BIG_V2
+	default y
+	help
+	  This option enable support for LEDs found on the LaCie 2Big
+	  and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
+	  controlled through a GPIO extension bus.
+
 config LEDS_TRIGGERS
 	bool "LED Trigger support"
 	help

drivers/leds/Makefile

@@ -38,6 +38,7 @@ obj-$(CONFIG_LEDS_ADP5520)		+= leds-adp5520.o
 obj-$(CONFIG_LEDS_DELL_NETBOOKS)	+= dell-led.o
 obj-$(CONFIG_LEDS_MC13783)		+= leds-mc13783.o
 obj-$(CONFIG_LEDS_NS2)			+= leds-ns2.o
+obj-$(CONFIG_LEDS_NETXBIG)		+= leds-netxbig.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o

drivers/leds/leds-ns2.c

@@ -141,10 +141,12 @@ static ssize_t ns2_led_sata_store(struct device *dev,
 				  struct device_attribute *attr,
 				  const char *buff, size_t count)
 {
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct ns2_led_data *led_dat =
+		container_of(led_cdev, struct ns2_led_data, cdev);
 	int ret;
 	unsigned long enable;
 	enum ns2_led_modes mode;
-	struct ns2_led_data *led_dat = dev_get_drvdata(dev);
 
 	ret = strict_strtoul(buff, 10, &enable);
 	if (ret < 0)
@@ -172,7 +174,9 @@ static ssize_t ns2_led_sata_store(struct device *dev,
 static ssize_t ns2_led_sata_show(struct device *dev,
 				 struct device_attribute *attr, char *buf)
 {
-	struct ns2_led_data *led_dat = dev_get_drvdata(dev);
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct ns2_led_data *led_dat =
+		container_of(led_cdev, struct ns2_led_data, cdev);
 
 	return sprintf(buf, "%d\n", led_dat->sata);
 }
@@ -234,7 +238,6 @@ create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat,
 	if (ret < 0)
 		goto err_free_slow;
 
-	dev_set_drvdata(led_dat->cdev.dev, led_dat);
 	ret = device_create_file(led_dat->cdev.dev, &dev_attr_sata);
 	if (ret < 0)
 		goto err_free_cdev;