Skip to content

L
linux
Commit 4b084784 authored by Guenter Roeck's avatar Guenter Roeck
Browse files
Options

Drop support for Renesas H8/300 (h8300) architecture 

H8/300 has been dead for several years, and the kernel for it
has not compiled for ages. Drop support for it.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Acked-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
parent 272b98c6
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 1 addition and 10890 deletions
Documentation/scheduler/sched-arch.txt
View file @ 4b084784
......@@ -65,11 +65,6 @@ Possible arch/ problems
Possible arch problems I found (and either tried to fix or didn't):
h8300 - Is such sleeping racy vs interrupts? (See #4a).
The H8/300 manual I found indicates yes, however disabling IRQs
over the sleep mean only NMIs can wake it up, so can't fix easily
without doing spin waiting.
ia64 - is safe_halt call racy vs interrupts? (does it sleep?) (See #4a)
sh64 - Is sleeping racy vs interrupts? (See #4a)
......
arch/h8300/Kconfig deleted 100644 → 0
View file @ 272b98c6
config H8300
bool
default y
select HAVE_IDE
select GENERIC_ATOMIC64
select HAVE_UID16
select VIRT_TO_BUS
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_IRQ_SHOW
select GENERIC_CPU_DEVICES
select MODULES_USE_ELF_RELA
select OLD_SIGSUSPEND3
select OLD_SIGACTION
select HAVE_UNDERSCORE_SYMBOL_PREFIX
config MMU
bool
default n
config SWAP
bool
default n
config ZONE_DMA
bool
default y
config FPU
bool
default n
config RWSEM_GENERIC_SPINLOCK
bool
default y
config RWSEM_XCHGADD_ALGORITHM
bool
default n
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config GENERIC_HWEIGHT
bool
default y
config GENERIC_CALIBRATE_DELAY
bool
default y
config GENERIC_BUG
bool
depends on BUG
config TIME_LOW_RES
bool
default y
config NO_IOPORT
def_bool y
config NO_DMA
def_bool y
config ISA
bool
default y
config PCI
bool
default n
config HZ
int
default 100
source "init/Kconfig"
source "kernel/Kconfig.freezer"
source "arch/h8300/Kconfig.cpu"
menu "Executable file formats"
source "fs/Kconfig.binfmt"
endmenu
source "net/Kconfig"
source "drivers/Kconfig"
source "arch/h8300/Kconfig.ide"
source "fs/Kconfig"
source "arch/h8300/Kconfig.debug"
source "security/Kconfig"
source "crypto/Kconfig"
source "lib/Kconfig"
arch/h8300/Kconfig.cpu deleted 100644 → 0
View file @ 272b98c6
menu "Processor type and features"
choice
prompt "H8/300 platform"
default H8300H_GENERIC
config H8300H_GENERIC
bool "H8/300H Generic"
help
H8/300H CPU Generic Hardware Support
config H8300H_AKI3068NET
bool "AE-3068/69"
select H83068
help
AKI-H8/3068F / AKI-H8/3069F Flashmicom LAN Board Support
More Information. (Japanese Only)
<http://akizukidenshi.com/catalog/default.aspx>
AE-3068/69 Evaluation Board Support
More Information.
<http://www.microtronique.com/ae3069lan.htm>
config H8300H_H8MAX
bool "H8MAX"
select H83068
help
H8MAX Evaluation Board Support
More Information. (Japanese Only)
<http://strawberry-linux.com/h8/index.html>
config H8300H_SIM
bool "H8/300H Simulator"
select H83007
help
GDB Simulator Support
More Information.
<http://sourceware.org/sid/>
config H8S_GENERIC
bool "H8S Generic"
help
H8S CPU Generic Hardware Support
config H8S_EDOSK2674
bool "EDOSK-2674"
select H8S2678
help
Renesas EDOSK-2674 Evaluation Board Support
More Information.
<http://www.azpower.com/H8-uClinux/index.html>
<http://www.renesas.eu/products/tools/introductory_evaluation_tools/evaluation_development_os_kits/edosk2674r/edosk2674r_software_tools_root.jsp>
config H8S_SIM
bool "H8S Simulator"
help
GDB Simulator Support
More Information.
<http://sourceware.org/sid/>
endchoice
choice
prompt "CPU Selection"
config H83002
bool "H8/3001,3002,3003"
depends on BROKEN
select CPU_H8300H
config H83007
bool "H8/3006,3007"
select CPU_H8300H
config H83048
bool "H8/3044,3045,3046,3047,3048,3052"
depends on BROKEN
select CPU_H8300H
config H83068
bool "H8/3065,3066,3067,3068,3069"
select CPU_H8300H
config H8S2678
bool "H8S/2670,2673,2674R,2675,2676"
select CPU_H8S
endchoice
config CPU_CLOCK
int "CPU Clock Frequency (/1KHz)"
default "20000"
help
CPU Clock Frequency divide to 1000
choice
prompt "Kernel executes from"
---help---
Choose the memory type that the kernel will be running in.
config RAMKERNEL
bool "RAM"
help
The kernel will be resident in RAM when running.
config ROMKERNEL
bool "ROM"
help
The kernel will be resident in FLASH/ROM when running.
endchoice
config CPU_H8300H
bool
depends on (H83002 || H83007 || H83048 || H83068)
default y
config CPU_H8S
bool
depends on H8S2678
default y
choice
prompt "Timer"
config H8300_TIMER8
bool "8bit timer (2ch cascade)"
depends on (H83007 || H83068 || H8S2678)
config H8300_TIMER16
bool "16bit timer"
depends on (H83007 || H83068)
config H8300_ITU
bool "ITU"
depends on (H83002 || H83048)
config H8300_TPU
bool "TPU"
depends on H8S2678
endchoice
if H8300_TIMER8
choice
prompt "Timer Channel"
config H8300_TIMER8_CH0
bool "Channel 0"
config H8300_TIMER8_CH2
bool "Channel 2"
depends on CPU_H8300H
endchoice
endif
config H8300_TIMER16_CH
int "16bit timer channel (0 - 2)"
depends on H8300_TIMER16
range 0 2
config H8300_ITU_CH
int "ITU channel"
depends on H8300_ITU
range 0 4
config H8300_TPU_CH
int "TPU channel"
depends on H8300_TPU
range 0 4
source "kernel/Kconfig.preempt"
source "mm/Kconfig"
endmenu
arch/h8300/Kconfig.debug deleted 100644 → 0
View file @ 272b98c6
menu "Kernel hacking"
source "lib/Kconfig.debug"
config FULLDEBUG
bool "Full Symbolic/Source Debugging support"
help
Enable debugging symbols on kernel build.
config HIGHPROFILE
bool "Use fast second timer for profiling"
help
Use a fast secondary clock to produce profiling information.
config NO_KERNEL_MSG
bool "Suppress Kernel BUG Messages"
help
Do not output any debug BUG messages within the kernel.
config GDB_MAGICPRINT
bool "Message Output for GDB MagicPrint service"
depends on (H8300H_SIM || H8S_SIM)
help
kernel messages output using MagicPrint service from GDB
config SYSCALL_PRINT
bool "SystemCall trace print"
help
output history of systemcall
config GDB_DEBUG
bool "Use gdb stub"
depends on (!H8300H_SIM && !H8S_SIM)
help
gdb stub exception support
config SH_STANDARD_BIOS
bool "Use gdb protocol serial console"
depends on (!H8300H_SIM && !H8S_SIM)
help
serial console output using GDB protocol.
Require eCos/RedBoot
config DEFAULT_CMDLINE
bool "Use builtin commandline"
default n
help
builtin kernel commandline enabled.
config KERNEL_COMMAND
string "Buildin command string"
depends on DEFAULT_CMDLINE
help
builtin kernel commandline strings.
config BLKDEV_RESERVE
bool "BLKDEV Reserved Memory"
default n
help
Reserved BLKDEV area.
config BLKDEV_RESERVE_ADDRESS
hex 'start address'
depends on BLKDEV_RESERVE
help
BLKDEV start address.
endmenu
arch/h8300/Kconfig.ide deleted 100644 → 0
View file @ 272b98c6
# uClinux H8/300 Target Board Selection Menu (IDE)
if (H8300H_AKI3068NET)
menu "IDE Extra configuration"
config H8300_IDE_BASE
hex "IDE register base address"
depends on IDE
default 0
help
IDE registers base address
config H8300_IDE_ALT
hex "IDE register alternate address"
depends on IDE
default 0
help
IDE alternate registers address
config H8300_IDE_IRQ
int "IDE IRQ no"
depends on IDE
default 0
help
IDE use IRQ no
endmenu
endif
if (H8300H_H8MAX)
config H8300_IDE_BASE
hex
depends on IDE
default 0x200000
config H8300_IDE_ALT
hex
depends on IDE
default 0x60000c
config H8300_IDE_IRQ
int
depends on IDE
default 5
endif
arch/h8300/Makefile deleted 100644 → 0
View file @ 272b98c6
#
# arch/h8300/Makefile
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# (C) Copyright 2002,2003 Yoshinori Sato <ysato@users.sourceforge.jp>
#
platform-$(CONFIG_CPU_H8300H) := h8300h
platform-$(CONFIG_CPU_H8S) := h8s
PLATFORM := $(platform-y)
board-$(CONFIG_H8300H_GENERIC) := generic
board-$(CONFIG_H8300H_AKI3068NET) := aki3068net
board-$(CONFIG_H8300H_H8MAX) := h8max
board-$(CONFIG_H8300H_SIM) := generic
board-$(CONFIG_H8S_GENERIC) := generic
board-$(CONFIG_H8S_EDOSK2674) := edosk2674
board-$(CONFIG_H8S_SIM) := generic
BOARD := $(board-y)
model-$(CONFIG_RAMKERNEL) := ram
model-$(CONFIG_ROMKERNEL) := rom
MODEL := $(model-y)
cflags-$(CONFIG_CPU_H8300H) := -mh
ldflags-$(CONFIG_CPU_H8300H) := -mh8300helf
cflags-$(CONFIG_CPU_H8S) := -ms
ldflags-$(CONFIG_CPU_H8S) := -mh8300self
KBUILD_CFLAGS += $(cflags-y)
KBUILD_CFLAGS += -mint32 -fno-builtin
KBUILD_CFLAGS += -g
KBUILD_CFLAGS += -D__linux__
KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
KBUILD_AFLAGS += -DPLATFORM=$(PLATFORM) -DMODEL=$(MODEL) $(cflags-y)
LDFLAGS += $(ldflags-y)
CROSS_COMPILE = h8300-elf-
LIBGCC := $(shell $(CROSS-COMPILE)$(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
head-y := arch/$(ARCH)/platform/$(PLATFORM)/$(BOARD)/crt0_$(MODEL).o
core-y += arch/$(ARCH)/kernel/ \
arch/$(ARCH)/mm/
ifdef PLATFORM
core-y += arch/$(ARCH)/platform/$(PLATFORM)/ \
arch/$(ARCH)/platform/$(PLATFORM)/$(BOARD)/
endif
libs-y += arch/$(ARCH)/lib/ $(LIBGCC)
boot := arch/h8300/boot
export MODEL PLATFORM BOARD
archmrproper:
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
vmlinux.srec vmlinux.bin zImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
define archhelp
@echo 'vmlinux.bin - Create raw binary'
@echo 'vmlinux.srec - Create srec binary'
@echo 'zImage - Compressed kernel image'
endef
arch/h8300/README deleted 100644 → 0
View file @ 272b98c6
linux-2.6 for H8/300 README
Yoshinori Sato <ysato@users.sourceforge.jp>
* Supported CPU
H8/300H and H8S
* Supported Target
1.simulator of GDB
require patches.
2.AE 3068/AE 3069
more information
MICROTRONIQUE <http://www.microtronique.com/>
Akizuki Denshi Tsusho Ltd. <http://akizukidenshi.com/> (Japanese Only)
3.H8MAX
see http://ip-sol.jp/h8max/ (Japanese Only)
4.EDOSK2674
see http://www.eu.renesas.com/products/mpumcu/tool/edk/support/edosk2674.html
http://www.uclinux.org/pub/uClinux/ports/h8/HITACHI-EDOSK2674-HOWTO
http://www.azpower.com/H8-uClinux/
* Toolchain Version
gcc-3.1 or higher and patch
see arch/h8300/tools_patch/README
binutils-2.12 or higher
gdb-5.2 or higher
The environment that can compile a h8300-elf binary is necessary.
* Userland Develop environment
used h8300-elf toolchains.
see http://www.uclinux.org/pub/uClinux/ports/h8/
* A few words of thanks
Porting to H8/300 serieses is support of Information-technology Promotion Agency, Japan.
I thank support.
and All developer/user.
arch/h8300/boot/Makefile deleted 100644 → 0
View file @ 272b98c6
# arch/h8300/boot/Makefile
targets := vmlinux.srec vmlinux.bin zImage
subdir- := compressed
OBJCOPYFLAGS_vmlinux.srec := -Osrec
OBJCOPYFLAGS_vmlinux.bin := -Obinary
OBJCOPYFLAGS_zImage := -O binary -R .note -R .comment -R .stab -R .stabstr -S
$(obj)/vmlinux.srec $(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
@echo ' Kernel: $@ is ready'
$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
$(call if_changed,objcopy)
@echo 'Kernel: $@ is ready'
$(obj)/compressed/vmlinux: FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed $@
CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec
arch/h8300/boot/compressed/Makefile deleted 100644 → 0
View file @ 272b98c6
#
# linux/arch/sh/boot/compressed/Makefile
#
# create a compressed vmlinux image from the original vmlinux
#
targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
asflags-y := -traditional
OBJECTS = $(obj)/head.o $(obj)/misc.o
#
# IMAGE_OFFSET is the load offset of the compression loader
# Assign dummy values if these 2 variables are not defined,
# in order to suppress error message.
#
CONFIG_MEMORY_START ?= 0x00400000
CONFIG_BOOT_LINK_OFFSET ?= 0x00140000
IMAGE_OFFSET := $(shell printf "0x%08x" $$(($(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET))))
LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -estartup $(obj)/vmlinux.lds
$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE
$(call if_changed,ld)
@:
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
$(call if_changed,gzip)
LDFLAGS_piggy.o := -r --format binary --oformat elf32-h8300 -T
OBJCOPYFLAGS := -O binary
$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
$(call if_changed,ld)
arch/h8300/boot/compressed/head.S deleted 100644 → 0
View file @ 272b98c6
/*
* linux/arch/h8300/boot/compressed/head.S
*
* Copyright (C) 2006 Yoshinori Sato
*/
.h8300h
#include <linux/linkage.h>
#define SRAM_START 0xff4000
.section .text..startup
.global startup
startup:
mov.l #SRAM_START+0x8000, sp
mov.l #__sbss, er0
mov.l #__ebss, er1
sub.l er0, er1
shlr er1
shlr er1
sub.l er2, er2
1:
mov.l er2, @er0
adds #4, er0
dec.l #1, er1
bne 1b
jsr @_decompress_kernel
jmp @0x400000
.align 9
fake_headers_as_bzImage:
.word 0
.ascii "HdrS" ; header signature
.word 0x0202 ; header version number (>= 0x0105)
; or else old loadlin-1.5 will fail)
.word 0 ; default_switch
.word 0 ; SETUPSEG
.word 0x1000
.word 0 ; pointing to kernel version string
.byte 0 ; = 0, old one (LILO, Loadlin,
; 0xTV: T=0 for LILO
; V = version
.byte 1 ; Load flags bzImage=1
.word 0x8000 ; size to move, when setup is not
.long 0x100000 ; 0x100000 = default for big kernel
.long 0 ; address of loaded ramdisk image
.long 0 ; its size in bytes
arch/h8300/boot/compressed/misc.c deleted 100644 → 0
View file @ 272b98c6
/*
* arch/h8300/boot/compressed/misc.c
*
* This is a collection of several routines from gzip-1.0.3
* adapted for Linux.
*
* malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
*
* Adapted for h8300 by Yoshinori Sato 2006
*/
#include <asm/uaccess.h>
/*
* gzip declarations
*/
#define OF(args) args
#define STATIC static
#undef memset
#undef memcpy
#define memzero(s, n) memset ((s), 0, (n))
typedef unsigned char uch;
typedef unsigned short ush;
typedef unsigned long ulg;
#define WSIZE 0x8000 /* Window size must be at least 32k, */
/* and a power of two */
static uch *inbuf; /* input buffer */
static uch window[WSIZE]; /* Sliding window buffer */
static unsigned insize = 0; /* valid bytes in inbuf */
static unsigned inptr = 0; /* index of next byte to be processed in inbuf */
static unsigned outcnt = 0; /* bytes in output buffer */
/* gzip flag byte */
#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
#define COMMENT 0x10 /* bit 4 set: file comment present */
#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
#define RESERVED 0xC0 /* bit 6,7: reserved */
#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
/* Diagnostic functions */
#ifdef DEBUG
# define Assert(cond,msg) {if(!(cond)) error(msg);}
# define Trace(x) fprintf x
# define Tracev(x) {if (verbose) fprintf x ;}
# define Tracevv(x) {if (verbose>1) fprintf x ;}
# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
#else
# define Assert(cond,msg)
# define Trace(x)
# define Tracev(x)
# define Tracevv(x)
# define Tracec(c,x)
# define Tracecv(c,x)
#endif
static int fill_inbuf(void);
static void flush_window(void);
static void error(char *m);
extern char input_data[];
extern int input_len;
static long bytes_out = 0;
static uch *output_data;
static unsigned long output_ptr = 0;
static void error(char *m);
int puts(const char *);
extern int _end;
static unsigned long free_mem_ptr;
static unsigned long free_mem_end_ptr;
#define HEAP_SIZE 0x10000
#include "../../../../lib/inflate.c"
#define SCR *((volatile unsigned char *)0xffff8a)
#define TDR *((volatile unsigned char *)0xffff8b)
#define SSR *((volatile unsigned char *)0xffff8c)
int puts(const char *s)
{
return 0;
}
void* memset(void* s, int c, size_t n)
{
int i;
char *ss = (char*)s;
for (i=0;i<n;i++) ss[i] = c;
return s;
}
void* memcpy(void* __dest, __const void* __src,
size_t __n)
{
int i;
char *d = (char *)__dest, *s = (char *)__src;
for (i=0;i<__n;i++) d[i] = s[i];
return __dest;
}
/* ===========================================================================
* Fill the input buffer. This is called only when the buffer is empty
* and at least one byte is really needed.
*/
static int fill_inbuf(void)
{
if (insize != 0) {
error("ran out of input data");
}
inbuf = input_data;
insize = input_len;
inptr = 1;
return inbuf[0];
}
/* ===========================================================================
* Write the output window window[0..outcnt-1] and update crc and bytes_out.
* (Used for the decompressed data only.)
*/
static void flush_window(void)
{
ulg c = crc; /* temporary variable */
unsigned n;
uch *in, *out, ch;
in = window;
out = &output_data[output_ptr];
for (n = 0; n < outcnt; n++) {
ch = *out++ = *in++;
c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
}
crc = c;
bytes_out += (ulg)outcnt;
output_ptr += (ulg)outcnt;
outcnt = 0;
}
static void error(char *x)
{
puts("\n\n");
puts(x);
puts("\n\n -- System halted");
while(1); /* Halt */
}
#define STACK_SIZE (4096)
long user_stack [STACK_SIZE];
long* stack_start = &user_stack[STACK_SIZE];
void decompress_kernel(void)
{
output_data = 0;
output_ptr = (unsigned long)0x400000;
free_mem_ptr = (unsigned long)&_end;
free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
makecrc();
puts("Uncompressing Linux... ");
gunzip();
puts("Ok, booting the kernel.\n");
}
arch/h8300/boot/compressed/vmlinux.lds deleted 100644 → 0
View file @ 272b98c6
SECTIONS
{
.text :
{
__stext = . ;
__text = .;
*(.text..startup)
*(.text)
__etext = . ;
}
.rodata :
{
*(.rodata)
}
.data :
{
__sdata = . ;
___data_start = . ;
*(.data.*)
}
.bss :
{
. = ALIGN(0x4) ;
__sbss = . ;
*(.bss*)
. = ALIGN(0x4) ;
__ebss = . ;
__end = . ;
}
}
arch/h8300/boot/compressed/vmlinux.scr deleted 100644 → 0
View file @ 272b98c6
SECTIONS
{
.data : {
_input_len = .;
LONG(_input_data_end - _input_data) _input_data = .;
*(.data)
_input_data_end = .;
}
}
arch/h8300/defconfig deleted 100644 → 0
View file @ 272b98c6
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLOB=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_H83007=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_BINFMT_MISC=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_UCLINUX=y
# CONFIG_BLK_DEV is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_DNOTIFY is not set
CONFIG_ROMFS_FS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_CRC32 is not set
arch/h8300/include/asm/Kbuild deleted 100644 → 0
View file @ 272b98c6
generic-y += clkdev.h
generic-y += exec.h
generic-y += linkage.h
generic-y += mmu.h
generic-y += module.h
generic-y += trace_clock.h
generic-y += xor.h
arch/h8300/include/asm/asm-offsets.h deleted 100644 → 0
View file @ 272b98c6
#include <generated/asm-offsets.h>
arch/h8300/include/asm/atomic.h deleted 100644 → 0
View file @ 272b98c6
#ifndef __ARCH_H8300_ATOMIC__
#define __ARCH_H8300_ATOMIC__
#include <linux/types.h>
#include <asm/cmpxchg.h>
/*
* Atomic operations that C can't guarantee us. Useful for
* resource counting etc..
*/
#define ATOMIC_INIT(i) { (i) }
#define atomic_read(v) (*(volatile int *)&(v)->counter)
#define atomic_set(v, i) (((v)->counter) = i)
#include <linux/kernel.h>
static __inline__ int atomic_add_return(int i, atomic_t *v)
{
unsigned long flags;
int ret;
local_irq_save(flags);
ret = v->counter += i;
local_irq_restore(flags);
return ret;
}
#define atomic_add(i, v) atomic_add_return(i, v)
#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
static __inline__ int atomic_sub_return(int i, atomic_t *v)
{
unsigned long flags;
int ret;
local_irq_save(flags);
ret = v->counter -= i;
local_irq_restore(flags);
return ret;
}
#define atomic_sub(i, v) atomic_sub_return(i, v)
#define atomic_sub_and_test(i,v) (atomic_sub_return(i, v) == 0)
static __inline__ int atomic_inc_return(atomic_t *v)
{
unsigned long flags;
int ret;
local_irq_save(flags);
v->counter++;
ret = v->counter;
local_irq_restore(flags);
return ret;
}
#define atomic_inc(v) atomic_inc_return(v)
/*
* atomic_inc_and_test - increment and test
* @v: pointer of type atomic_t
*
* Atomically increments @v by 1
* and returns true if the result is zero, or false for all
* other cases.
*/
#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
static __inline__ int atomic_dec_return(atomic_t *v)
{
unsigned long flags;
int ret;
local_irq_save(flags);
--v->counter;
ret = v->counter;
local_irq_restore(flags);
return ret;
}
#define atomic_dec(v) atomic_dec_return(v)
static __inline__ int atomic_dec_and_test(atomic_t *v)
{
unsigned long flags;
int ret;
local_irq_save(flags);
--v->counter;
ret = v->counter;
local_irq_restore(flags);
return ret == 0;
}
static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
{
int ret;
unsigned long flags;
local_irq_save(flags);
ret = v->counter;
if (likely(ret == old))
v->counter = new;
local_irq_restore(flags);
return ret;
}
static inline int __atomic_add_unless(atomic_t *v, int a, int u)
{
int ret;
unsigned long flags;
local_irq_save(flags);
ret = v->counter;
if (ret != u)
v->counter += a;
local_irq_restore(flags);
return ret;
}
static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v)
{
__asm__ __volatile__("stc ccr,r1l\n\t"
"orc #0x80,ccr\n\t"
"mov.l %0,er0\n\t"
"and.l %1,er0\n\t"
"mov.l er0,%0\n\t"
"ldc r1l,ccr"
: "=m" (*v) : "g" (~(mask)) :"er0","er1");
}
static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v)
{
__asm__ __volatile__("stc ccr,r1l\n\t"
"orc #0x80,ccr\n\t"
"mov.l %0,er0\n\t"
"or.l %1,er0\n\t"
"mov.l er0,%0\n\t"
"ldc r1l,ccr"
: "=m" (*v) : "g" (mask) :"er0","er1");
}
/* Atomic operations are already serializing */
#define smp_mb__before_atomic_dec() barrier()
#define smp_mb__after_atomic_dec() barrier()
#define smp_mb__before_atomic_inc() barrier()
#define smp_mb__after_atomic_inc() barrier()
#endif /* __ARCH_H8300_ATOMIC __ */
arch/h8300/include/asm/barrier.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_BARRIER_H
#define _H8300_BARRIER_H
#define nop() asm volatile ("nop"::)
/*
* Force strict CPU ordering.
* Not really required on H8...
*/
#define mb() asm volatile ("" : : :"memory")
#define rmb() asm volatile ("" : : :"memory")
#define wmb() asm volatile ("" : : :"memory")
#define set_mb(var, value) do { xchg(&var, value); } while (0)
#define read_barrier_depends() do { } while (0)
#ifdef CONFIG_SMP
#define smp_mb() mb()
#define smp_rmb() rmb()
#define smp_wmb() wmb()
#define smp_read_barrier_depends() read_barrier_depends()
#else
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()
#define smp_read_barrier_depends() do { } while(0)
#endif
#endif /* _H8300_BARRIER_H */
arch/h8300/include/asm/bitops.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_BITOPS_H
#define _H8300_BITOPS_H
/*
* Copyright 1992, Linus Torvalds.
* Copyright 2002, Yoshinori Sato
*/
#include <linux/compiler.h>
#ifdef __KERNEL__
#ifndef _LINUX_BITOPS_H
#error only <linux/bitops.h> can be included directly
#endif
/*
* Function prototypes to keep gcc -Wall happy
*/
/*
* ffz = Find First Zero in word. Undefined if no zero exists,
* so code should check against ~0UL first..
*/
static __inline__ unsigned long ffz(unsigned long word)
{
unsigned long result;
result = -1;
__asm__("1:\n\t"
"shlr.l %2\n\t"
"adds #1,%0\n\t"
"bcs 1b"
: "=r" (result)
: "0" (result),"r" (word));
return result;
}
#define H8300_GEN_BITOP_CONST(OP,BIT) \
case BIT: \
__asm__(OP " #" #BIT ",@%0"::"r"(b_addr):"memory"); \
break;
#define H8300_GEN_BITOP(FNAME,OP) \
static __inline__ void FNAME(int nr, volatile unsigned long* addr) \
{ \
volatile unsigned char *b_addr; \
b_addr = (volatile unsigned char *)addr + ((nr >> 3) ^ 3); \
if (__builtin_constant_p(nr)) { \
switch(nr & 7) { \
H8300_GEN_BITOP_CONST(OP,0) \
H8300_GEN_BITOP_CONST(OP,1) \
H8300_GEN_BITOP_CONST(OP,2) \
H8300_GEN_BITOP_CONST(OP,3) \
H8300_GEN_BITOP_CONST(OP,4) \
H8300_GEN_BITOP_CONST(OP,5) \
H8300_GEN_BITOP_CONST(OP,6) \
H8300_GEN_BITOP_CONST(OP,7) \
} \
} else { \
__asm__(OP " %w0,@%1"::"r"(nr),"r"(b_addr):"memory"); \
} \
}
/*
* clear_bit() doesn't provide any barrier for the compiler.
*/
#define smp_mb__before_clear_bit() barrier()
#define smp_mb__after_clear_bit() barrier()
H8300_GEN_BITOP(set_bit ,"bset")
H8300_GEN_BITOP(clear_bit ,"bclr")
H8300_GEN_BITOP(change_bit,"bnot")
#define __set_bit(nr,addr) set_bit((nr),(addr))
#define __clear_bit(nr,addr) clear_bit((nr),(addr))
#define __change_bit(nr,addr) change_bit((nr),(addr))
#undef H8300_GEN_BITOP
#undef H8300_GEN_BITOP_CONST
static __inline__ int test_bit(int nr, const unsigned long* addr)
{
return (*((volatile unsigned char *)addr +
((nr >> 3) ^ 3)) & (1UL << (nr & 7))) != 0;
}
#define __test_bit(nr, addr) test_bit(nr, addr)
#define H8300_GEN_TEST_BITOP_CONST_INT(OP,BIT) \
case BIT: \
__asm__("stc ccr,%w1\n\t" \
"orc #0x80,ccr\n\t" \
"bld #" #BIT ",@%4\n\t" \
OP " #" #BIT ",@%4\n\t" \
"rotxl.l %0\n\t" \
"ldc %w1,ccr" \
: "=r"(retval),"=&r"(ccrsave),"=m"(*b_addr) \
: "0" (retval),"r" (b_addr) \
: "memory"); \
break;
#define H8300_GEN_TEST_BITOP_CONST(OP,BIT) \
case BIT: \
__asm__("bld #" #BIT ",@%3\n\t" \
OP " #" #BIT ",@%3\n\t" \
"rotxl.l %0\n\t" \
: "=r"(retval),"=m"(*b_addr) \
: "0" (retval),"r" (b_addr) \
: "memory"); \
break;
#define H8300_GEN_TEST_BITOP(FNNAME,OP) \
static __inline__ int FNNAME(int nr, volatile void * addr) \
{ \
int retval = 0; \
char ccrsave; \
volatile unsigned char *b_addr; \
b_addr = (volatile unsigned char *)addr + ((nr >> 3) ^ 3); \
if (__builtin_constant_p(nr)) { \
switch(nr & 7) { \
H8300_GEN_TEST_BITOP_CONST_INT(OP,0) \
H8300_GEN_TEST_BITOP_CONST_INT(OP,1) \
H8300_GEN_TEST_BITOP_CONST_INT(OP,2) \
H8300_GEN_TEST_BITOP_CONST_INT(OP,3) \
H8300_GEN_TEST_BITOP_CONST_INT(OP,4) \
H8300_GEN_TEST_BITOP_CONST_INT(OP,5) \
H8300_GEN_TEST_BITOP_CONST_INT(OP,6) \
H8300_GEN_TEST_BITOP_CONST_INT(OP,7) \
} \
} else { \
__asm__("stc ccr,%w1\n\t" \
"orc #0x80,ccr\n\t" \
"btst %w5,@%4\n\t" \
OP " %w5,@%4\n\t" \
"beq 1f\n\t" \
"inc.l #1,%0\n" \
"1:\n\t" \
"ldc %w1,ccr" \
: "=r"(retval),"=&r"(ccrsave),"=m"(*b_addr) \
: "0" (retval),"r" (b_addr),"r"(nr) \
: "memory"); \
} \
return retval; \
} \
\
static __inline__ int __ ## FNNAME(int nr, volatile void * addr) \
{ \
int retval = 0; \
volatile unsigned char *b_addr; \
b_addr = (volatile unsigned char *)addr + ((nr >> 3) ^ 3); \
if (__builtin_constant_p(nr)) { \
switch(nr & 7) { \
H8300_GEN_TEST_BITOP_CONST(OP,0) \
H8300_GEN_TEST_BITOP_CONST(OP,1) \
H8300_GEN_TEST_BITOP_CONST(OP,2) \
H8300_GEN_TEST_BITOP_CONST(OP,3) \
H8300_GEN_TEST_BITOP_CONST(OP,4) \
H8300_GEN_TEST_BITOP_CONST(OP,5) \
H8300_GEN_TEST_BITOP_CONST(OP,6) \
H8300_GEN_TEST_BITOP_CONST(OP,7) \
} \
} else { \
__asm__("btst %w4,@%3\n\t" \
OP " %w4,@%3\n\t" \
"beq 1f\n\t" \
"inc.l #1,%0\n" \
"1:" \
: "=r"(retval),"=m"(*b_addr) \
: "0" (retval),"r" (b_addr),"r"(nr) \
: "memory"); \
} \
return retval; \
}
H8300_GEN_TEST_BITOP(test_and_set_bit, "bset")
H8300_GEN_TEST_BITOP(test_and_clear_bit, "bclr")
H8300_GEN_TEST_BITOP(test_and_change_bit,"bnot")
#undef H8300_GEN_TEST_BITOP_CONST
#undef H8300_GEN_TEST_BITOP_CONST_INT
#undef H8300_GEN_TEST_BITOP
#include <asm-generic/bitops/ffs.h>
static __inline__ unsigned long __ffs(unsigned long word)
{
unsigned long result;
result = -1;
__asm__("1:\n\t"
"shlr.l %2\n\t"
"adds #1,%0\n\t"
"bcc 1b"
: "=r" (result)
: "0"(result),"r"(word));
return result;
}
#include <asm-generic/bitops/find.h>
#include <asm-generic/bitops/sched.h>
#include <asm-generic/bitops/hweight.h>
#include <asm-generic/bitops/lock.h>
#include <asm-generic/bitops/le.h>
#include <asm-generic/bitops/ext2-atomic.h>
#endif /* __KERNEL__ */
#include <asm-generic/bitops/fls.h>
#include <asm-generic/bitops/__fls.h>
#include <asm-generic/bitops/fls64.h>
#endif /* _H8300_BITOPS_H */
arch/h8300/include/asm/bug.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_BUG_H
#define _H8300_BUG_H
/* always true */
#define is_valid_bugaddr(addr) (1)
#include <asm-generic/bug.h>
struct pt_regs;
extern void die(const char *str, struct pt_regs *fp, unsigned long err);
#endif
arch/h8300/include/asm/bugs.h deleted 100644 → 0
View file @ 272b98c6
/*
* include/asm-h8300/bugs.h
*
* Copyright (C) 1994 Linus Torvalds
*/
/*
* This is included by init/main.c to check for architecture-dependent bugs.
*
* Needs:
* void check_bugs(void);
*/
static void check_bugs(void)
{
}
arch/h8300/include/asm/cache.h deleted 100644 → 0
View file @ 272b98c6
#ifndef __ARCH_H8300_CACHE_H
#define __ARCH_H8300_CACHE_H
/* bytes per L1 cache line */
#define L1_CACHE_SHIFT 2
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
/* m68k-elf-gcc 2.95.2 doesn't like these */
#define __cacheline_aligned
#define ____cacheline_aligned
#endif
arch/h8300/include/asm/cachectl.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_CACHECTL_H
#define _H8300_CACHECTL_H
/* Definitions for the cacheflush system call. */
#define FLUSH_SCOPE_LINE 0 /* Flush a cache line */
#define FLUSH_SCOPE_PAGE 0 /* Flush a page */
#define FLUSH_SCOPE_ALL 0 /* Flush the whole cache -- superuser only */
#define FLUSH_CACHE_DATA 0 /* Writeback and flush data cache */
#define FLUSH_CACHE_INSN 0 /* Flush instruction cache */
#define FLUSH_CACHE_BOTH 0 /* Flush both caches */
#endif /* _H8300_CACHECTL_H */
arch/h8300/include/asm/cacheflush.h deleted 100644 → 0
View file @ 272b98c6
/*
* (C) Copyright 2002, Yoshinori Sato <ysato@users.sourceforge.jp>
*/
#ifndef _ASM_H8300_CACHEFLUSH_H
#define _ASM_H8300_CACHEFLUSH_H
/*
* Cache handling functions
* No Cache memory all dummy functions
*/
#define flush_cache_all()
#define flush_cache_mm(mm)
#define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_range(vma,a,b)
#define flush_cache_page(vma,p,pfn)
#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
#define flush_dcache_page(page)
#define flush_dcache_mmap_lock(mapping)
#define flush_dcache_mmap_unlock(mapping)
#define flush_icache()
#define flush_icache_page(vma,page)
#define flush_icache_range(start,len)
#define flush_cache_vmap(start, end)
#define flush_cache_vunmap(start, end)
#define cache_push_v(vaddr,len)
#define cache_push(paddr,len)
#define cache_clear(paddr,len)
#define flush_dcache_range(a,b)
#define flush_icache_user_range(vma,page,addr,len)
#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
memcpy(dst, src, len)
#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
memcpy(dst, src, len)
#endif /* _ASM_H8300_CACHEFLUSH_H */
arch/h8300/include/asm/checksum.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_CHECKSUM_H
#define _H8300_CHECKSUM_H
/*
* computes the checksum of a memory block at buff, length len,
* and adds in "sum" (32-bit)
*
* returns a 32-bit number suitable for feeding into itself
* or csum_tcpudp_magic
*
* this function must be called with even lengths, except
* for the last fragment, which may be odd
*
* it's best to have buff aligned on a 32-bit boundary
*/
__wsum csum_partial(const void *buff, int len, __wsum sum);
/*
* the same as csum_partial, but copies from src while it
* checksums
*
* here even more important to align src and dst on a 32-bit (or even
* better 64-bit) boundary
*/
__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum);
/*
* the same as csum_partial_copy, but copies from user space.
*
* here even more important to align src and dst on a 32-bit (or even
* better 64-bit) boundary
*/
extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
int len, __wsum sum, int *csum_err);
__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
/*
* Fold a partial checksum
*/
static inline __sum16 csum_fold(__wsum sum)
{
__asm__("mov.l %0,er0\n\t"
"add.w e0,r0\n\t"
"xor.w e0,e0\n\t"
"rotxl.w e0\n\t"
"add.w e0,r0\n\t"
"sub.w e0,e0\n\t"
"mov.l er0,%0"
: "=r"(sum)
: "0"(sum)
: "er0");
return (__force __sum16)~sum;
}
/*
* computes the checksum of the TCP/UDP pseudo-header
* returns a 16-bit checksum, already complemented
*/
static inline __wsum
csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
unsigned short proto, __wsum sum)
{
__asm__ ("sub.l er0,er0\n\t"
"add.l %2,%0\n\t"
"addx #0,r0l\n\t"
"add.l %3,%0\n\t"
"addx #0,r0l\n\t"
"add.l %4,%0\n\t"
"addx #0,r0l\n\t"
"add.l er0,%0\n\t"
"bcc 1f\n\t"
"inc.l #1,%0\n"
"1:"
: "=&r" (sum)
: "0" (sum), "r" (daddr), "r" (saddr), "r" (len + proto)
:"er0");
return sum;
}
static inline __sum16
csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
unsigned short proto, __wsum sum)
{
return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
}
/*
* this routine is used for miscellaneous IP-like checksums, mainly
* in icmp.c
*/
extern __sum16 ip_compute_csum(const void *buff, int len);
#endif /* _H8300_CHECKSUM_H */
arch/h8300/include/asm/cmpxchg.h deleted 100644 → 0
View file @ 272b98c6
#ifndef __ARCH_H8300_CMPXCHG__
#define __ARCH_H8300_CMPXCHG__
#include <linux/irqflags.h>
#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
struct __xchg_dummy { unsigned long a[100]; };
#define __xg(x) ((volatile struct __xchg_dummy *)(x))
static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
{
unsigned long tmp, flags;
local_irq_save(flags);
switch (size) {
case 1:
__asm__ __volatile__
("mov.b %2,%0\n\t"
"mov.b %1,%2"
: "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)) : "memory");
break;
case 2:
__asm__ __volatile__
("mov.w %2,%0\n\t"
"mov.w %1,%2"
: "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)) : "memory");
break;
case 4:
__asm__ __volatile__
("mov.l %2,%0\n\t"
"mov.l %1,%2"
: "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)) : "memory");
break;
default:
tmp = 0;
}
local_irq_restore(flags);
return tmp;
}
#include <asm-generic/cmpxchg-local.h>
/*
* cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
* them available.
*/
#define cmpxchg_local(ptr, o, n) \
((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
(unsigned long)(n), sizeof(*(ptr))))
#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
#ifndef CONFIG_SMP
#include <asm-generic/cmpxchg.h>
#endif
#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
#endif /* __ARCH_H8300_CMPXCHG__ */
arch/h8300/include/asm/cputime.h deleted 100644 → 0
View file @ 272b98c6
#ifndef __H8300_CPUTIME_H
#define __H8300_CPUTIME_H
#include <asm-generic/cputime.h>
#endif /* __H8300_CPUTIME_H */
arch/h8300/include/asm/current.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_CURRENT_H
#define _H8300_CURRENT_H
/*
* current.h
* (C) Copyright 2000, Lineo, David McCullough <davidm@lineo.com>
* (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
*
* rather than dedicate a register (as the m68k source does), we
* just keep a global, we should probably just change it all to be
* current and lose _current_task.
*/
#include <linux/thread_info.h>
#include <asm/thread_info.h>
struct task_struct;
static inline struct task_struct *get_current(void)
{
return(current_thread_info()->task);
}
#define current get_current()
#endif /* _H8300_CURRENT_H */
arch/h8300/include/asm/dbg.h deleted 100644 → 0
View file @ 272b98c6
#define DEBUG 1
#define BREAK asm volatile ("trap #3")
arch/h8300/include/asm/delay.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_DELAY_H
#define _H8300_DELAY_H
#include <asm/param.h>
/*
* Copyright (C) 2002 Yoshinori Sato <ysato@sourceforge.jp>
*
* Delay routines, using a pre-computed "loops_per_second" value.
*/
static inline void __delay(unsigned long loops)
{
__asm__ __volatile__ ("1:\n\t"
"dec.l #1,%0\n\t"
"bne 1b"
:"=r" (loops):"0"(loops));
}
/*
* Use only for very small delays ( < 1 msec). Should probably use a
* lookup table, really, as the multiplications take much too long with
* short delays. This is a "reasonable" implementation, though (and the
* first constant multiplications gets optimized away if the delay is
* a constant)
*/
extern unsigned long loops_per_jiffy;
static inline void udelay(unsigned long usecs)
{
usecs *= 4295; /* 2**32 / 1000000 */
usecs /= (loops_per_jiffy*HZ);
if (usecs)
__delay(usecs);
}
#endif /* _H8300_DELAY_H */
arch/h8300/include/asm/device.h deleted 100644 → 0
View file @ 272b98c6
/*
* Arch specific extensions to struct device
*
* This file is released under the GPLv2
*/
#include <asm-generic/device.h>
arch/h8300/include/asm/div64.h deleted 100644 → 0
View file @ 272b98c6
#include <asm-generic/div64.h>
arch/h8300/include/asm/dma.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_DMA_H
#define _H8300_DMA_H
/*
* Set number of channels of DMA on ColdFire for different implementations.
*/
#define MAX_DMA_CHANNELS 0
#define MAX_DMA_ADDRESS PAGE_OFFSET
/* These are in kernel/dma.c: */
extern int request_dma(unsigned int dmanr, const char *device_id); /* reserve a DMA channel */
extern void free_dma(unsigned int dmanr); /* release it again */
#endif /* _H8300_DMA_H */
arch/h8300/include/asm/elf.h deleted 100644 → 0
View file @ 272b98c6
#ifndef __ASMH8300_ELF_H
#define __ASMH8300_ELF_H
/*
* ELF register definitions..
*/
#include <asm/ptrace.h>
#include <asm/user.h>
typedef unsigned long elf_greg_t;
#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
typedef elf_greg_t elf_gregset_t[ELF_NGREG];
typedef unsigned long elf_fpregset_t;
/*
* This is used to ensure we don't load something for the wrong architecture.
*/
#define elf_check_arch(x) ((x)->e_machine == EM_H8_300)
/*
* These are used to set parameters in the core dumps.
*/
#define ELF_CLASS ELFCLASS32
#define ELF_DATA ELFDATA2MSB
#define ELF_ARCH EM_H8_300
#if defined(__H8300H__)
#define ELF_CORE_EFLAGS 0x810000
#endif
#if defined(__H8300S__)
#define ELF_CORE_EFLAGS 0x820000
#endif
#define ELF_PLAT_INIT(_r) _r->er1 = 0
#define ELF_EXEC_PAGESIZE 4096
/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
use of this is to invoke "./ld.so someprog" to test out a new version of
the loader. We need to make sure that it is out of the way of the program
that it will "exec", and that there is sufficient room for the brk. */
#define ELF_ET_DYN_BASE 0xD0000000UL
/* This yields a mask that user programs can use to figure out what
instruction set this cpu supports. */
#define ELF_HWCAP (0)
/* This yields a string that ld.so will use to load implementation
specific libraries for optimization. This is more specific in
intent than poking at uname or /proc/cpuinfo. */
#define ELF_PLATFORM (NULL)
#define R_H8_NONE 0
#define R_H8_DIR32 1
#define R_H8_DIR32_28 2
#define R_H8_DIR32_24 3
#define R_H8_DIR32_16 4
#define R_H8_DIR32U 6
#define R_H8_DIR32U_28 7
#define R_H8_DIR32U_24 8
#define R_H8_DIR32U_20 9
#define R_H8_DIR32U_16 10
#define R_H8_DIR24 11
#define R_H8_DIR24_20 12
#define R_H8_DIR24_16 13
#define R_H8_DIR24U 14
#define R_H8_DIR24U_20 15
#define R_H8_DIR24U_16 16
#define R_H8_DIR16 17
#define R_H8_DIR16U 18
#define R_H8_DIR16S_32 19
#define R_H8_DIR16S_28 20
#define R_H8_DIR16S_24 21
#define R_H8_DIR16S_20 22
#define R_H8_DIR16S 23
#define R_H8_DIR8 24
#define R_H8_DIR8U 25
#define R_H8_DIR8Z_32 26
#define R_H8_DIR8Z_28 27
#define R_H8_DIR8Z_24 28
#define R_H8_DIR8Z_20 29
#define R_H8_DIR8Z_16 30
#define R_H8_PCREL16 31
#define R_H8_PCREL8 32
#define R_H8_BPOS 33
#define R_H8_PCREL32 34
#define R_H8_GOT32O 35
#define R_H8_GOT16O 36
#define R_H8_DIR16A8 59
#define R_H8_DIR16R8 60
#define R_H8_DIR24A8 61
#define R_H8_DIR24R8 62
#define R_H8_DIR32A16 63
#define R_H8_ABS32 65
#define R_H8_ABS32A16 127
#endif
arch/h8300/include/asm/emergency-restart.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _ASM_EMERGENCY_RESTART_H
#define _ASM_EMERGENCY_RESTART_H
#include <asm-generic/emergency-restart.h>
#endif /* _ASM_EMERGENCY_RESTART_H */
arch/h8300/include/asm/fb.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _ASM_FB_H_
#define _ASM_FB_H_
#include <linux/fb.h>
#define fb_pgprotect(...) do {} while (0)
static inline int fb_is_primary_device(struct fb_info *info)
{
return 0;
}
#endif /* _ASM_FB_H_ */
arch/h8300/include/asm/flat.h deleted 100644 → 0
View file @ 272b98c6
/*
* include/asm-h8300/flat.h -- uClinux flat-format executables
*/
#ifndef __H8300_FLAT_H__
#define __H8300_FLAT_H__
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) 1
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
#define flat_set_persistent(relval, p) 0
/*
* on the H8 a couple of the relocations have an instruction in the
* top byte. As there can only be 24bits of address space, we just
* always preserve that 8bits at the top, when it isn't an instruction
* is is 0 (davidm@snapgear.com)
*/
#define flat_get_relocate_addr(rel) (rel)
#define flat_get_addr_from_rp(rp, relval, flags, persistent) \
(get_unaligned(rp) & ((flags & FLAT_FLAG_GOTPIC) ? 0xffffffff: 0x00ffffff))
#define flat_put_addr_at_rp(rp, addr, rel) \
put_unaligned (((*(char *)(rp)) << 24) | ((addr) & 0x00ffffff), rp)
#endif /* __H8300_FLAT_H__ */
arch/h8300/include/asm/futex.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _ASM_FUTEX_H
#define _ASM_FUTEX_H
#include <asm-generic/futex.h>
#endif
arch/h8300/include/asm/gpio-internal.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_GPIO_H
#define _H8300_GPIO_H
#define H8300_GPIO_P1 0
#define H8300_GPIO_P2 1
#define H8300_GPIO_P3 2
#define H8300_GPIO_P4 3
#define H8300_GPIO_P5 4
#define H8300_GPIO_P6 5
#define H8300_GPIO_P7 6
#define H8300_GPIO_P8 7
#define H8300_GPIO_P9 8
#define H8300_GPIO_PA 9
#define H8300_GPIO_PB 10
#define H8300_GPIO_PC 11
#define H8300_GPIO_PD 12
#define H8300_GPIO_PE 13
#define H8300_GPIO_PF 14
#define H8300_GPIO_PG 15
#define H8300_GPIO_PH 16
#define H8300_GPIO_B7 0x80
#define H8300_GPIO_B6 0x40
#define H8300_GPIO_B5 0x20
#define H8300_GPIO_B4 0x10
#define H8300_GPIO_B3 0x08
#define H8300_GPIO_B2 0x04
#define H8300_GPIO_B1 0x02
#define H8300_GPIO_B0 0x01
#define H8300_GPIO_INPUT 0
#define H8300_GPIO_OUTPUT 1
#define H8300_GPIO_RESERVE(port, bits) \
h8300_reserved_gpio(port, bits)
#define H8300_GPIO_FREE(port, bits) \
h8300_free_gpio(port, bits)
#define H8300_GPIO_DDR(port, bit, dir) \
h8300_set_gpio_dir(((port) << 8) | (bit), dir)
#define H8300_GPIO_GETDIR(port, bit) \
h8300_get_gpio_dir(((port) << 8) | (bit))
extern int h8300_reserved_gpio(int port, int bits);
extern int h8300_free_gpio(int port, int bits);
extern int h8300_set_gpio_dir(int port_bit, int dir);
extern int h8300_get_gpio_dir(int port_bit);
extern int h8300_init_gpio(void);
#endif
arch/h8300/include/asm/hardirq.h deleted 100644 → 0
View file @ 272b98c6
#ifndef __H8300_HARDIRQ_H
#define __H8300_HARDIRQ_H
#include <asm/irq.h>
#define HARDIRQ_BITS 8
/*
* The hardirq mask has to be large enough to have
* space for potentially all IRQ sources in the system
* nesting on a single CPU:
*/
#if (1 << HARDIRQ_BITS) < NR_IRQS
# error HARDIRQ_BITS is too low!
#endif
#include <asm-generic/hardirq.h>
#endif
arch/h8300/include/asm/io.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/asm/irq.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_IRQ_H_
#define _H8300_IRQ_H_
#include <asm/ptrace.h>
#if defined(CONFIG_CPU_H8300H)
#define NR_IRQS 64
#define EXT_IRQ0 12
#define EXT_IRQ1 13
#define EXT_IRQ2 14
#define EXT_IRQ3 15
#define EXT_IRQ4 16
#define EXT_IRQ5 17
#define EXT_IRQ6 18
#define EXT_IRQ7 19
#define EXT_IRQS 5
#define IER_REGS *(volatile unsigned char *)IER
#endif
#if defined(CONFIG_CPU_H8S)
#define NR_IRQS 128
#define EXT_IRQ0 16
#define EXT_IRQ1 17
#define EXT_IRQ2 18
#define EXT_IRQ3 19
#define EXT_IRQ4 20
#define EXT_IRQ5 21
#define EXT_IRQ6 22
#define EXT_IRQ7 23
#define EXT_IRQ8 24
#define EXT_IRQ9 25
#define EXT_IRQ10 26
#define EXT_IRQ11 27
#define EXT_IRQ12 28
#define EXT_IRQ13 29
#define EXT_IRQ14 30
#define EXT_IRQ15 31
#define EXT_IRQS 15
#define IER_REGS *(volatile unsigned short *)IER
#endif
static __inline__ int irq_canonicalize(int irq)
{
return irq;
}
typedef void (*h8300_vector)(void);
#endif /* _H8300_IRQ_H_ */
arch/h8300/include/asm/irq_regs.h deleted 100644 → 0
View file @ 272b98c6
#include <asm-generic/irq_regs.h>
arch/h8300/include/asm/irqflags.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_IRQFLAGS_H
#define _H8300_IRQFLAGS_H
static inline unsigned long arch_local_save_flags(void)
{
unsigned long flags;
asm volatile ("stc ccr,%w0" : "=r" (flags));
return flags;
}
static inline void arch_local_irq_disable(void)
{
asm volatile ("orc #0x80,ccr" : : : "memory");
}
static inline void arch_local_irq_enable(void)
{
asm volatile ("andc #0x7f,ccr" : : : "memory");
}
static inline unsigned long arch_local_irq_save(void)
{
unsigned long flags = arch_local_save_flags();
arch_local_irq_disable();
return flags;
}
static inline void arch_local_irq_restore(unsigned long flags)
{
asm volatile ("ldc %w0,ccr" : : "r" (flags) : "memory");
}
static inline bool arch_irqs_disabled_flags(unsigned long flags)
{
return (flags & 0x80) == 0x80;
}
static inline bool arch_irqs_disabled(void)
{
return arch_irqs_disabled_flags(arch_local_save_flags());
}
#endif /* _H8300_IRQFLAGS_H */
arch/h8300/include/asm/kdebug.h deleted 100644 → 0
View file @ 272b98c6
#include <asm-generic/kdebug.h>
arch/h8300/include/asm/kmap_types.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _ASM_H8300_KMAP_TYPES_H
#define _ASM_H8300_KMAP_TYPES_H
#include <asm-generic/kmap_types.h>
#endif
arch/h8300/include/asm/local.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_LOCAL_H_
#define _H8300_LOCAL_H_
#include <asm-generic/local.h>
#endif
arch/h8300/include/asm/local64.h deleted 100644 → 0
View file @ 272b98c6
#include <asm-generic/local64.h>
arch/h8300/include/asm/mc146818rtc.h deleted 100644 → 0
View file @ 272b98c6
/*
* Machine dependent access functions for RTC registers.
*/
#ifndef _H8300_MC146818RTC_H
#define _H8300_MC146818RTC_H
/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
#endif /* _H8300_MC146818RTC_H */
arch/h8300/include/asm/mmu_context.h deleted 100644 → 0
View file @ 272b98c6
#ifndef __H8300_MMU_CONTEXT_H
#define __H8300_MMU_CONTEXT_H
#include <asm/setup.h>
#include <asm/page.h>
#include <asm/pgalloc.h>
#include <asm-generic/mm_hooks.h>
static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
{
}
static inline int
init_new_context(struct task_struct *tsk, struct mm_struct *mm)
{
// mm->context = virt_to_phys(mm->pgd);
return(0);
}
#define destroy_context(mm) do { } while(0)
#define deactivate_mm(tsk,mm) do { } while(0)
static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
{
}
static inline void activate_mm(struct mm_struct *prev_mm,
struct mm_struct *next_mm)
{
}
#endif
arch/h8300/include/asm/mutex.h deleted 100644 → 0
View file @ 272b98c6
/*
* Pull in the generic implementation for the mutex fastpath.
*
* TODO: implement optimized primitives instead, or leave the generic
* implementation in place, or pick the atomic_xchg() based generic
* implementation. (see asm-generic/mutex-xchg.h for details)
*/
#include <asm-generic/mutex-dec.h>
arch/h8300/include/asm/page.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_PAGE_H
#define _H8300_PAGE_H
/* PAGE_SHIFT determines the page size */
#define PAGE_SHIFT (12)
#define PAGE_SIZE (1UL << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
#include <asm/setup.h>
#ifndef __ASSEMBLY__
#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
#define free_user_page(page, addr) free_page(addr)
#define clear_page(page) memset((page), 0, PAGE_SIZE)
#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE)
#define clear_user_page(page, vaddr, pg) clear_page(page)
#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
/*
* These are used to make use of C type-checking..
*/
typedef struct { unsigned long pte; } pte_t;
typedef struct { unsigned long pmd[16]; } pmd_t;
typedef struct { unsigned long pgd; } pgd_t;
typedef struct { unsigned long pgprot; } pgprot_t;
typedef struct page *pgtable_t;
#define pte_val(x) ((x).pte)
#define pmd_val(x) ((&x)->pmd[0])
#define pgd_val(x) ((x).pgd)
#define pgprot_val(x) ((x).pgprot)
#define __pte(x) ((pte_t) { (x) } )
#define __pmd(x) ((pmd_t) { (x) } )
#define __pgd(x) ((pgd_t) { (x) } )
#define __pgprot(x) ((pgprot_t) { (x) } )
extern unsigned long memory_start;
extern unsigned long memory_end;
#endif /* !__ASSEMBLY__ */
#include <asm/page_offset.h>
#define PAGE_OFFSET (PAGE_OFFSET_RAW)
#ifndef __ASSEMBLY__
#define __pa(vaddr) virt_to_phys(vaddr)
#define __va(paddr) phys_to_virt((unsigned long)paddr)
#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT)
#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
#define pfn_valid(page) (page < max_mapnr)
#define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT)
#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
((void *)(kaddr) < (void *)memory_end))
#endif /* __ASSEMBLY__ */
#include <asm-generic/memory_model.h>
#include <asm-generic/getorder.h>
#endif /* _H8300_PAGE_H */
arch/h8300/include/asm/page_offset.h deleted 100644 → 0
View file @ 272b98c6
#define PAGE_OFFSET_RAW 0x00000000
arch/h8300/include/asm/param.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_PARAM_H
#define _H8300_PARAM_H
#include <uapi/asm/param.h>
#define HZ CONFIG_HZ
#define USER_HZ HZ
#define CLOCKS_PER_SEC (USER_HZ)
#endif /* _H8300_PARAM_H */
arch/h8300/include/asm/pci.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _ASM_H8300_PCI_H
#define _ASM_H8300_PCI_H
/*
* asm-h8300/pci.h - H8/300 specific PCI declarations.
*
* Yoshinori Sato <ysato@users.sourceforge.jp>
*/
#define pcibios_assign_all_busses() 0
static inline void pcibios_penalize_isa_irq(int irq, int active)
{
/* We don't do dynamic PCI IRQ allocation */
}
#define PCI_DMA_BUS_IS_PHYS (1)
#endif /* _ASM_H8300_PCI_H */
arch/h8300/include/asm/percpu.h deleted 100644 → 0
View file @ 272b98c6
#ifndef __ARCH_H8300_PERCPU__
#define __ARCH_H8300_PERCPU__
#include <asm-generic/percpu.h>
#endif /* __ARCH_H8300_PERCPU__ */
arch/h8300/include/asm/pgalloc.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_PGALLOC_H
#define _H8300_PGALLOC_H
#include <asm/setup.h>
#define check_pgt_cache() do { } while (0)
#endif /* _H8300_PGALLOC_H */
arch/h8300/include/asm/pgtable.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_PGTABLE_H
#define _H8300_PGTABLE_H
#include <asm-generic/4level-fixup.h>
#include <linux/slab.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/io.h>
#define pgd_present(pgd) (1) /* pages are always present on NO_MM */
#define pgd_none(pgd) (0)
#define pgd_bad(pgd) (0)
#define pgd_clear(pgdp)
#define kern_addr_valid(addr) (1)
#define pmd_offset(a, b) ((void *)0)
#define pmd_none(pmd) (1)
#define pgd_offset_k(adrdress) ((pgd_t *)0)
#define pte_offset_kernel(dir, address) ((pte_t *)0)
#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */
#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */
#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */
#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */
#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */
extern void paging_init(void);
#define swapper_pg_dir ((pgd_t *) 0)
#define __swp_type(x) (0)
#define __swp_offset(x) (0)
#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
static inline int pte_file(pte_t pte) { return 0; }
/*
* ZERO_PAGE is a global shared page that is always zero: used
* for zero-mapped memory areas etc..
*/
#define ZERO_PAGE(vaddr) (virt_to_page(0))
/*
* These would be in other places but having them here reduces the diffs.
*/
extern unsigned int kobjsize(const void *objp);
extern int is_in_rom(unsigned long);
/*
* No page table caches to initialise
*/
#define pgtable_cache_init() do { } while (0)
/*
* All 32bit addresses are effectively valid for vmalloc...
* Sort of meaningless for non-VM targets.
*/
#define VMALLOC_START 0
#define VMALLOC_END 0xffffffff
/*
* All 32bit addresses are effectively valid for vmalloc...
* Sort of meaningless for non-VM targets.
*/
#define VMALLOC_START 0
#define VMALLOC_END 0xffffffff
#define arch_enter_lazy_cpu_mode() do {} while (0)
#include <asm-generic/pgtable.h>
#endif /* _H8300_PGTABLE_H */
arch/h8300/include/asm/processor.h deleted 100644 → 0
View file @ 272b98c6
/*
* include/asm-h8300/processor.h
*
* Copyright (C) 2002 Yoshinori Sato
*
* Based on: linux/asm-m68nommu/processor.h
*
* Copyright (C) 1995 Hamish Macdonald
*/
#ifndef __ASM_H8300_PROCESSOR_H
#define __ASM_H8300_PROCESSOR_H
/*
* Default implementation of macro that returns current
* instruction pointer ("program counter").
*/
#define current_text_addr() ({ __label__ _l; _l: &&_l;})
#include <linux/compiler.h>
#include <asm/segment.h>
#include <asm/fpu.h>
#include <asm/ptrace.h>
#include <asm/current.h>
static inline unsigned long rdusp(void) {
extern unsigned int sw_usp;
return(sw_usp);
}
static inline void wrusp(unsigned long usp) {
extern unsigned int sw_usp;
sw_usp = usp;
}
/*
* User space process size: 3.75GB. This is hardcoded into a few places,
* so don't change it unless you know what you are doing.
*/
#define TASK_SIZE (0xFFFFFFFFUL)
#ifdef __KERNEL__
#define STACK_TOP TASK_SIZE
#define STACK_TOP_MAX STACK_TOP
#endif
/*
* This decides where the kernel will search for a free chunk of vm
* space during mmap's. We won't be using it
*/
#define TASK_UNMAPPED_BASE 0
struct thread_struct {
unsigned long ksp; /* kernel stack pointer */
unsigned long usp; /* user stack pointer */
unsigned long ccr; /* saved status register */
unsigned long esp0; /* points to SR of stack frame */
struct {
unsigned short *addr;
unsigned short inst;
} breakinfo;
};
#define INIT_THREAD { \
.ksp = sizeof(init_stack) + (unsigned long)init_stack, \
.usp = 0, \
.ccr = PS_S, \
.esp0 = 0, \
.breakinfo = { \
.addr = (unsigned short *)-1, \
.inst = 0 \
} \
}
/*
* Do necessary setup to start up a newly executed thread.
*
* pass the data segment into user programs if it exists,
* it can't hurt anything as far as I can tell
*/
#if defined(__H8300H__)
#define start_thread(_regs, _pc, _usp) \
do { \
(_regs)->pc = (_pc); \
(_regs)->ccr = 0x00; /* clear all flags */ \
(_regs)->er5 = current->mm->start_data; /* GOT base */ \
wrusp((unsigned long)(_usp) - sizeof(unsigned long)*3); \
} while(0)
#endif
#if defined(__H8300S__)
#define start_thread(_regs, _pc, _usp) \
do { \
(_regs)->pc = (_pc); \
(_regs)->ccr = 0x00; /* clear kernel flag */ \
(_regs)->exr = 0x78; /* enable all interrupts */ \
(_regs)->er5 = current->mm->start_data; /* GOT base */ \
/* 14 = space for retaddr(4), vector(4), er0(4) and ext(2) on stack */ \
wrusp(((unsigned long)(_usp)) - 14); \
} while(0)
#endif
/* Forward declaration, a strange C thing */
struct task_struct;
/* Free all resources held by a thread. */
static inline void release_thread(struct task_struct *dead_task)
{
}
/*
* Free current thread data structures etc..
*/
static inline void exit_thread(void)
{
}
/*
* Return saved PC of a blocked thread.
*/
unsigned long thread_saved_pc(struct task_struct *tsk);
unsigned long get_wchan(struct task_struct *p);
#define KSTK_EIP(tsk) \
({ \
unsigned long eip = 0; \
if ((tsk)->thread.esp0 > PAGE_SIZE && \
MAP_NR((tsk)->thread.esp0) < max_mapnr) \
eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
eip; })
#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
#define cpu_relax() barrier()
#define HARD_RESET_NOW() ({ \
local_irq_disable(); \
asm("jmp @@0"); \
})
#endif
arch/h8300/include/asm/ptrace.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_PTRACE_H
#define _H8300_PTRACE_H
#include <uapi/asm/ptrace.h>
#ifndef __ASSEMBLY__
#if defined(CONFIG_CPU_H8S)
#endif
#ifndef PS_S
#define PS_S (0x10)
#endif
#if defined(__H8300H__)
#define H8300_REGS_NO 11
#endif
#if defined(__H8300S__)
#define H8300_REGS_NO 12
#endif
/* Find the stack offset for a register, relative to thread.esp0. */
#define PT_REG(reg) ((long)&((struct pt_regs *)0)->reg)
#define arch_has_single_step() (1)
#define user_mode(regs) (!((regs)->ccr & PS_S))
#define instruction_pointer(regs) ((regs)->pc)
#define profile_pc(regs) instruction_pointer(regs)
#define current_pt_regs() ((struct pt_regs *) \
(THREAD_SIZE + (unsigned long)current_thread_info()) - 1)
#define signal_pt_regs() ((struct pt_regs *)current->thread.esp0)
#define current_user_stack_pointer() rdusp()
#endif /* __ASSEMBLY__ */
#endif /* _H8300_PTRACE_H */
arch/h8300/include/asm/regs267x.h deleted 100644 → 0
View file @ 272b98c6
/* internal Peripherals Register address define */
/* CPU: H8/306x */
#if !defined(__REGS_H8S267x__)
#define __REGS_H8S267x__
#if defined(__KERNEL__)
#define DASTCR 0xFEE01A
#define DADR0 0xFFFFA4
#define DADR1 0xFFFFA5
#define DACR01 0xFFFFA6
#define DADR2 0xFFFFA8
#define DADR3 0xFFFFA9
#define DACR23 0xFFFFAA
#define ADDRA 0xFFFF90
#define ADDRAH 0xFFFF90
#define ADDRAL 0xFFFF91
#define ADDRB 0xFFFF92
#define ADDRBH 0xFFFF92
#define ADDRBL 0xFFFF93
#define ADDRC 0xFFFF94
#define ADDRCH 0xFFFF94
#define ADDRCL 0xFFFF95
#define ADDRD 0xFFFF96
#define ADDRDH 0xFFFF96
#define ADDRDL 0xFFFF97
#define ADDRE 0xFFFF98
#define ADDREH 0xFFFF98
#define ADDREL 0xFFFF99
#define ADDRF 0xFFFF9A
#define ADDRFH 0xFFFF9A
#define ADDRFL 0xFFFF9B
#define ADDRG 0xFFFF9C
#define ADDRGH 0xFFFF9C
#define ADDRGL 0xFFFF9D
#define ADDRH 0xFFFF9E
#define ADDRHH 0xFFFF9E
#define ADDRHL 0xFFFF9F
#define ADCSR 0xFFFFA0
#define ADCR 0xFFFFA1
#define ABWCR 0xFFFEC0
#define ASTCR 0xFFFEC1
#define WTCRAH 0xFFFEC2
#define WTCRAL 0xFFFEC3
#define WTCRBH 0xFFFEC4
#define WTCRBL 0xFFFEC5
#define RDNCR 0xFFFEC6
#define CSACRH 0xFFFEC8
#define CSACRL 0xFFFEC9
#define BROMCRH 0xFFFECA
#define BROMCRL 0xFFFECB
#define BCR 0xFFFECC
#define DRAMCR 0xFFFED0
#define DRACCR 0xFFFED2
#define REFCR 0xFFFED4
#define RTCNT 0xFFFED6
#define RTCOR 0xFFFED7
#define MAR0AH 0xFFFEE0
#define MAR0AL 0xFFFEE2
#define IOAR0A 0xFFFEE4
#define ETCR0A 0xFFFEE6
#define MAR0BH 0xFFFEE8
#define MAR0BL 0xFFFEEA
#define IOAR0B 0xFFFEEC
#define ETCR0B 0xFFFEEE
#define MAR1AH 0xFFFEF0
#define MAR1AL 0xFFFEF2
#define IOAR1A 0xFFFEF4
#define ETCR1A 0xFFFEF6
#define MAR1BH 0xFFFEF8
#define MAR1BL 0xFFFEFA
#define IOAR1B 0xFFFEFC
#define ETCR1B 0xFFFEFE
#define DMAWER 0xFFFF20
#define DMATCR 0xFFFF21
#define DMACR0A 0xFFFF22
#define DMACR0B 0xFFFF23
#define DMACR1A 0xFFFF24
#define DMACR1B 0xFFFF25
#define DMABCRH 0xFFFF26
#define DMABCRL 0xFFFF27
#define EDSAR0 0xFFFDC0
#define EDDAR0 0xFFFDC4
#define EDTCR0 0xFFFDC8
#define EDMDR0 0xFFFDCC
#define EDMDR0H 0xFFFDCC
#define EDMDR0L 0xFFFDCD
#define EDACR0 0xFFFDCE
#define EDSAR1 0xFFFDD0
#define EDDAR1 0xFFFDD4
#define EDTCR1 0xFFFDD8
#define EDMDR1 0xFFFDDC
#define EDMDR1H 0xFFFDDC
#define EDMDR1L 0xFFFDDD
#define EDACR1 0xFFFDDE
#define EDSAR2 0xFFFDE0
#define EDDAR2 0xFFFDE4
#define EDTCR2 0xFFFDE8
#define EDMDR2 0xFFFDEC
#define EDMDR2H 0xFFFDEC
#define EDMDR2L 0xFFFDED
#define EDACR2 0xFFFDEE
#define EDSAR3 0xFFFDF0
#define EDDAR3 0xFFFDF4
#define EDTCR3 0xFFFDF8
#define EDMDR3 0xFFFDFC
#define EDMDR3H 0xFFFDFC
#define EDMDR3L 0xFFFDFD
#define EDACR3 0xFFFDFE
#define IPRA 0xFFFE00
#define IPRB 0xFFFE02
#define IPRC 0xFFFE04
#define IPRD 0xFFFE06
#define IPRE 0xFFFE08
#define IPRF 0xFFFE0A
#define IPRG 0xFFFE0C
#define IPRH 0xFFFE0E
#define IPRI 0xFFFE10
#define IPRJ 0xFFFE12
#define IPRK 0xFFFE14
#define ITSR 0xFFFE16
#define SSIER 0xFFFE18
#define ISCRH 0xFFFE1A
#define ISCRL 0xFFFE1C
#define INTCR 0xFFFF31
#define IER 0xFFFF32
#define IERH 0xFFFF32
#define IERL 0xFFFF33
#define ISR 0xFFFF34
#define ISRH 0xFFFF34
#define ISRL 0xFFFF35
#define P1DDR 0xFFFE20
#define P2DDR 0xFFFE21
#define P3DDR 0xFFFE22
#define P4DDR 0xFFFE23
#define P5DDR 0xFFFE24
#define P6DDR 0xFFFE25
#define P7DDR 0xFFFE26
#define P8DDR 0xFFFE27
#define P9DDR 0xFFFE28
#define PADDR 0xFFFE29
#define PBDDR 0xFFFE2A
#define PCDDR 0xFFFE2B
#define PDDDR 0xFFFE2C
#define PEDDR 0xFFFE2D
#define PFDDR 0xFFFE2E
#define PGDDR 0xFFFE2F
#define PHDDR 0xFFFF74
#define PFCR0 0xFFFE32
#define PFCR1 0xFFFE33
#define PFCR2 0xFFFE34
#define PAPCR 0xFFFE36
#define PBPCR 0xFFFE37
#define PCPCR 0xFFFE38
#define PDPCR 0xFFFE39
#define PEPCR 0xFFFE3A
#define P3ODR 0xFFFE3C
#define PAODR 0xFFFE3D
#define P1DR 0xFFFF60
#define P2DR 0xFFFF61
#define P3DR 0xFFFF62
#define P4DR 0xFFFF63
#define P5DR 0xFFFF64
#define P6DR 0xFFFF65
#define P7DR 0xFFFF66
#define P8DR 0xFFFF67
#define P9DR 0xFFFF68
#define PADR 0xFFFF69
#define PBDR 0xFFFF6A
#define PCDR 0xFFFF6B
#define PDDR 0xFFFF6C
#define PEDR 0xFFFF6D
#define PFDR 0xFFFF6E
#define PGDR 0xFFFF6F
#define PHDR 0xFFFF72
#define PORT1 0xFFFF50
#define PORT2 0xFFFF51
#define PORT3 0xFFFF52
#define PORT4 0xFFFF53
#define PORT5 0xFFFF54
#define PORT6 0xFFFF55
#define PORT7 0xFFFF56
#define PORT8 0xFFFF57
#define PORT9 0xFFFF58
#define PORTA 0xFFFF59
#define PORTB 0xFFFF5A
#define PORTC 0xFFFF5B
#define PORTD 0xFFFF5C
#define PORTE 0xFFFF5D
#define PORTF 0xFFFF5E
#define PORTG 0xFFFF5F
#define PORTH 0xFFFF70
#define PCR 0xFFFF46
#define PMR 0xFFFF47
#define NDERH 0xFFFF48
#define NDERL 0xFFFF49
#define PODRH 0xFFFF4A
#define PODRL 0xFFFF4B
#define NDRH1 0xFFFF4C
#define NDRL1 0xFFFF4D
#define NDRH2 0xFFFF4E
#define NDRL2 0xFFFF4F
#define SMR0 0xFFFF78
#define BRR0 0xFFFF79
#define SCR0 0xFFFF7A
#define TDR0 0xFFFF7B
#define SSR0 0xFFFF7C
#define RDR0 0xFFFF7D
#define SCMR0 0xFFFF7E
#define SMR1 0xFFFF80
#define BRR1 0xFFFF81
#define SCR1 0xFFFF82
#define TDR1 0xFFFF83
#define SSR1 0xFFFF84
#define RDR1 0xFFFF85
#define SCMR1 0xFFFF86
#define SMR2 0xFFFF88
#define BRR2 0xFFFF89
#define SCR2 0xFFFF8A
#define TDR2 0xFFFF8B
#define SSR2 0xFFFF8C
#define RDR2 0xFFFF8D
#define SCMR2 0xFFFF8E
#define IRCR0 0xFFFE1E
#define SEMR 0xFFFDA8
#define MDCR 0xFFFF3E
#define SYSCR 0xFFFF3D
#define MSTPCRH 0xFFFF40
#define MSTPCRL 0xFFFF41
#define FLMCR1 0xFFFFC8
#define FLMCR2 0xFFFFC9
#define EBR1 0xFFFFCA
#define EBR2 0xFFFFCB
#define CTGARC_RAMCR 0xFFFECE
#define SBYCR 0xFFFF3A
#define SCKCR 0xFFFF3B
#define PLLCR 0xFFFF45
#define TSTR 0xFFFFC0
#define TSNC 0XFFFFC1
#define TCR0 0xFFFFD0
#define TMDR0 0xFFFFD1
#define TIORH0 0xFFFFD2
#define TIORL0 0xFFFFD3
#define TIER0 0xFFFFD4
#define TSR0 0xFFFFD5
#define TCNT0 0xFFFFD6
#define GRA0 0xFFFFD8
#define GRB0 0xFFFFDA
#define GRC0 0xFFFFDC
#define GRD0 0xFFFFDE
#define TCR1 0xFFFFE0
#define TMDR1 0xFFFFE1
#define TIORH1 0xFFFFE2
#define TIORL1 0xFFFFE3
#define TIER1 0xFFFFE4
#define TSR1 0xFFFFE5
#define TCNT1 0xFFFFE6
#define GRA1 0xFFFFE8
#define GRB1 0xFFFFEA
#define TCR2 0xFFFFF0
#define TMDR2 0xFFFFF1
#define TIORH2 0xFFFFF2
#define TIORL2 0xFFFFF3
#define TIER2 0xFFFFF4
#define TSR2 0xFFFFF5
#define TCNT2 0xFFFFF6
#define GRA2 0xFFFFF8
#define GRB2 0xFFFFFA
#define TCR3 0xFFFE80
#define TMDR3 0xFFFE81
#define TIORH3 0xFFFE82
#define TIORL3 0xFFFE83
#define TIER3 0xFFFE84
#define TSR3 0xFFFE85
#define TCNT3 0xFFFE86
#define GRA3 0xFFFE88
#define GRB3 0xFFFE8A
#define GRC3 0xFFFE8C
#define GRD3 0xFFFE8E
#define TCR4 0xFFFE90
#define TMDR4 0xFFFE91
#define TIORH4 0xFFFE92
#define TIORL4 0xFFFE93
#define TIER4 0xFFFE94
#define TSR4 0xFFFE95
#define TCNT4 0xFFFE96
#define GRA4 0xFFFE98
#define GRB4 0xFFFE9A
#define TCR5 0xFFFEA0
#define TMDR5 0xFFFEA1
#define TIORH5 0xFFFEA2
#define TIORL5 0xFFFEA3
#define TIER5 0xFFFEA4
#define TSR5 0xFFFEA5
#define TCNT5 0xFFFEA6
#define GRA5 0xFFFEA8
#define GRB5 0xFFFEAA
#define _8TCR0 0xFFFFB0
#define _8TCR1 0xFFFFB1
#define _8TCSR0 0xFFFFB2
#define _8TCSR1 0xFFFFB3
#define _8TCORA0 0xFFFFB4
#define _8TCORA1 0xFFFFB5
#define _8TCORB0 0xFFFFB6
#define _8TCORB1 0xFFFFB7
#define _8TCNT0 0xFFFFB8
#define _8TCNT1 0xFFFFB9
#define TCSR 0xFFFFBC
#define TCNT 0xFFFFBD
#define RSTCSRW 0xFFFFBE
#define RSTCSRR 0xFFFFBF
#endif /* __KERNEL__ */
#endif /* __REGS_H8S267x__ */
arch/h8300/include/asm/regs306x.h deleted 100644 → 0
View file @ 272b98c6
/* internal Peripherals Register address define */
/* CPU: H8/306x */
#if !defined(__REGS_H8306x__)
#define __REGS_H8306x__
#if defined(__KERNEL__)
#define DASTCR 0xFEE01A
#define DADR0 0xFEE09C
#define DADR1 0xFEE09D
#define DACR 0xFEE09E
#define ADDRAH 0xFFFFE0
#define ADDRAL 0xFFFFE1
#define ADDRBH 0xFFFFE2
#define ADDRBL 0xFFFFE3
#define ADDRCH 0xFFFFE4
#define ADDRCL 0xFFFFE5
#define ADDRDH 0xFFFFE6
#define ADDRDL 0xFFFFE7
#define ADCSR 0xFFFFE8
#define ADCR 0xFFFFE9
#define BRCR 0xFEE013
#define ADRCR 0xFEE01E
#define CSCR 0xFEE01F
#define ABWCR 0xFEE020
#define ASTCR 0xFEE021
#define WCRH 0xFEE022
#define WCRL 0xFEE023
#define BCR 0xFEE024
#define DRCRA 0xFEE026
#define DRCRB 0xFEE027
#define RTMCSR 0xFEE028
#define RTCNT 0xFEE029
#define RTCOR 0xFEE02A
#define MAR0AR 0xFFFF20
#define MAR0AE 0xFFFF21
#define MAR0AH 0xFFFF22
#define MAR0AL 0xFFFF23
#define ETCR0AL 0xFFFF24
#define ETCR0AH 0xFFFF25
#define IOAR0A 0xFFFF26
#define DTCR0A 0xFFFF27
#define MAR0BR 0xFFFF28
#define MAR0BE 0xFFFF29
#define MAR0BH 0xFFFF2A
#define MAR0BL 0xFFFF2B
#define ETCR0BL 0xFFFF2C
#define ETCR0BH 0xFFFF2D
#define IOAR0B 0xFFFF2E
#define DTCR0B 0xFFFF2F
#define MAR1AR 0xFFFF30
#define MAR1AE 0xFFFF31
#define MAR1AH 0xFFFF32
#define MAR1AL 0xFFFF33
#define ETCR1AL 0xFFFF34
#define ETCR1AH 0xFFFF35
#define IOAR1A 0xFFFF36
#define DTCR1A 0xFFFF37
#define MAR1BR 0xFFFF38
#define MAR1BE 0xFFFF39
#define MAR1BH 0xFFFF3A
#define MAR1BL 0xFFFF3B
#define ETCR1BL 0xFFFF3C
#define ETCR1BH 0xFFFF3D
#define IOAR1B 0xFFFF3E
#define DTCR1B 0xFFFF3F
#define ISCR 0xFEE014
#define IER 0xFEE015
#define ISR 0xFEE016
#define IPRA 0xFEE018
#define IPRB 0xFEE019
#define P1DDR 0xFEE000
#define P2DDR 0xFEE001
#define P3DDR 0xFEE002
#define P4DDR 0xFEE003
#define P5DDR 0xFEE004
#define P6DDR 0xFEE005
/*#define P7DDR 0xFEE006*/
#define P8DDR 0xFEE007
#define P9DDR 0xFEE008
#define PADDR 0xFEE009
#define PBDDR 0xFEE00A
#define P1DR 0xFFFFD0
#define P2DR 0xFFFFD1
#define P3DR 0xFFFFD2
#define P4DR 0xFFFFD3
#define P5DR 0xFFFFD4
#define P6DR 0xFFFFD5
/*#define P7DR 0xFFFFD6*/
#define P8DR 0xFFFFD7
#define P9DR 0xFFFFD8
#define PADR 0xFFFFD9
#define PBDR 0xFFFFDA
#define P2CR 0xFEE03C
#define P4CR 0xFEE03E
#define P5CR 0xFEE03F
#define SMR0 0xFFFFB0
#define BRR0 0xFFFFB1
#define SCR0 0xFFFFB2
#define TDR0 0xFFFFB3
#define SSR0 0xFFFFB4
#define RDR0 0xFFFFB5
#define SCMR0 0xFFFFB6
#define SMR1 0xFFFFB8
#define BRR1 0xFFFFB9
#define SCR1 0xFFFFBA
#define TDR1 0xFFFFBB
#define SSR1 0xFFFFBC
#define RDR1 0xFFFFBD
#define SCMR1 0xFFFFBE
#define SMR2 0xFFFFC0
#define BRR2 0xFFFFC1
#define SCR2 0xFFFFC2
#define TDR2 0xFFFFC3
#define SSR2 0xFFFFC4
#define RDR2 0xFFFFC5
#define SCMR2 0xFFFFC6
#define MDCR 0xFEE011
#define SYSCR 0xFEE012
#define DIVCR 0xFEE01B
#define MSTCRH 0xFEE01C
#define MSTCRL 0xFEE01D
#define FLMCR1 0xFEE030
#define FLMCR2 0xFEE031
#define EBR1 0xFEE032
#define EBR2 0xFEE033
#define RAMCR 0xFEE077
#define TSTR 0xFFFF60
#define TSNC 0XFFFF61
#define TMDR 0xFFFF62
#define TOLR 0xFFFF63
#define TISRA 0xFFFF64
#define TISRB 0xFFFF65
#define TISRC 0xFFFF66
#define TCR0 0xFFFF68
#define TIOR0 0xFFFF69
#define TCNT0H 0xFFFF6A
#define TCNT0L 0xFFFF6B
#define GRA0H 0xFFFF6C
#define GRA0L 0xFFFF6D
#define GRB0H 0xFFFF6E
#define GRB0L 0xFFFF6F
#define TCR1 0xFFFF70
#define TIOR1 0xFFFF71
#define TCNT1H 0xFFFF72
#define TCNT1L 0xFFFF73
#define GRA1H 0xFFFF74
#define GRA1L 0xFFFF75
#define GRB1H 0xFFFF76
#define GRB1L 0xFFFF77
#define TCR3 0xFFFF78
#define TIOR3 0xFFFF79
#define TCNT3H 0xFFFF7A
#define TCNT3L 0xFFFF7B
#define GRA3H 0xFFFF7C
#define GRA3L 0xFFFF7D
#define GRB3H 0xFFFF7E
#define GRB3L 0xFFFF7F
#define _8TCR0 0xFFFF80
#define _8TCR1 0xFFFF81
#define _8TCSR0 0xFFFF82
#define _8TCSR1 0xFFFF83
#define TCORA0 0xFFFF84
#define TCORA1 0xFFFF85
#define TCORB0 0xFFFF86
#define TCORB1 0xFFFF87
#define _8TCNT0 0xFFFF88
#define _8TCNT1 0xFFFF89
#define _8TCR2 0xFFFF90
#define _8TCR3 0xFFFF91
#define _8TCSR2 0xFFFF92
#define _8TCSR3 0xFFFF93
#define TCORA2 0xFFFF94
#define TCORA3 0xFFFF95
#define TCORB2 0xFFFF96
#define TCORB3 0xFFFF97
#define _8TCNT2 0xFFFF98
#define _8TCNT3 0xFFFF99
#define TCSR 0xFFFF8C
#define TCNT 0xFFFF8D
#define RSTCSR 0xFFFF8F
#define TPMR 0xFFFFA0
#define TPCR 0xFFFFA1
#define NDERB 0xFFFFA2
#define NDERA 0xFFFFA3
#define NDRB1 0xFFFFA4
#define NDRA1 0xFFFFA5
#define NDRB2 0xFFFFA6
#define NDRA2 0xFFFFA7
#define TCSR 0xFFFF8C
#define TCNT 0xFFFF8D
#define RSTCSRW 0xFFFF8E
#define RSTCSRR 0xFFFF8F
#endif /* __KERNEL__ */
#endif /* __REGS_H8306x__ */
arch/h8300/include/asm/scatterlist.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_SCATTERLIST_H
#define _H8300_SCATTERLIST_H
#include <asm-generic/scatterlist.h>
#endif /* !(_H8300_SCATTERLIST_H) */
arch/h8300/include/asm/sections.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_SECTIONS_H_
#define _H8300_SECTIONS_H_
#include <asm-generic/sections.h>
#endif
arch/h8300/include/asm/segment.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_SEGMENT_H
#define _H8300_SEGMENT_H
/* define constants */
#define USER_DATA (1)
#ifndef __USER_DS
#define __USER_DS (USER_DATA)
#endif
#define USER_PROGRAM (2)
#define SUPER_DATA (3)
#ifndef __KERNEL_DS
#define __KERNEL_DS (SUPER_DATA)
#endif
#define SUPER_PROGRAM (4)
#ifndef __ASSEMBLY__
typedef struct {
unsigned long seg;
} mm_segment_t;
#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
#define USER_DS MAKE_MM_SEG(__USER_DS)
#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS)
/*
* Get/set the SFC/DFC registers for MOVES instructions
*/
static inline mm_segment_t get_fs(void)
{
return USER_DS;
}
static inline mm_segment_t get_ds(void)
{
/* return the supervisor data space code */
return KERNEL_DS;
}
static inline void set_fs(mm_segment_t val)
{
}
#define segment_eq(a,b) ((a).seg == (b).seg)
#endif /* __ASSEMBLY__ */
#endif /* _H8300_SEGMENT_H */
arch/h8300/include/asm/sh_bios.h deleted 100644 → 0
View file @ 272b98c6
/* eCos HAL interface header */
#ifndef SH_BIOS_H
#define SH_BIOS_H
#define HAL_IF_VECTOR_TABLE 0xfffe20
#define CALL_IF_SET_CONSOLE_COMM 13
#define QUERY_CURRENT -1
#define MANGLER -3
/* Checking for GDB stub active */
/* suggestion Jonathan Larmour */
static int sh_bios_in_gdb_mode(void)
{
static int gdb_active = -1;
if (gdb_active == -1) {
int (*set_console_comm)(int);
set_console_comm = ((void **)HAL_IF_VECTOR_TABLE)[CALL_IF_SET_CONSOLE_COMM];
gdb_active = (set_console_comm(QUERY_CURRENT) == MANGLER);
}
return gdb_active;
}
static void sh_bios_gdb_detach(void)
{
}
#endif
arch/h8300/include/asm/shm.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_SHM_H
#define _H8300_SHM_H
/* format of page table entries that correspond to shared memory pages
currently out in swap space (see also mm/swap.c):
bits 0-1 (PAGE_PRESENT) is = 0
bits 8..2 (SWP_TYPE) are = SHM_SWP_TYPE
bits 31..9 are used like this:
bits 15..9 (SHM_ID) the id of the shared memory segment
bits 30..16 (SHM_IDX) the index of the page within the shared memory segment
(actually only bits 25..16 get used since SHMMAX is so low)
bit 31 (SHM_READ_ONLY) flag whether the page belongs to a read-only attach
*/
/* on the m68k both bits 0 and 1 must be zero */
/* format on the sun3 is similar, but bits 30, 31 are set to zero and all
others are reduced by 2. --m */
#ifndef CONFIG_SUN3
#define SHM_ID_SHIFT 9
#else
#define SHM_ID_SHIFT 7
#endif
#define _SHM_ID_BITS 7
#define SHM_ID_MASK ((1<<_SHM_ID_BITS)-1)
#define SHM_IDX_SHIFT (SHM_ID_SHIFT+_SHM_ID_BITS)
#define _SHM_IDX_BITS 15
#define SHM_IDX_MASK ((1<<_SHM_IDX_BITS)-1)
#endif /* _H8300_SHM_H */
arch/h8300/include/asm/shmparam.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_SHMPARAM_H
#define _H8300_SHMPARAM_H
#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
#endif /* _H8300_SHMPARAM_H */
arch/h8300/include/asm/signal.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_SIGNAL_H
#define _H8300_SIGNAL_H
#include <uapi/asm/signal.h>
/* Most things should be clean enough to redefine this at will, if care
is taken to make libc match. */
#define _NSIG 64
#define _NSIG_BPW 32
#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
typedef unsigned long old_sigset_t; /* at least 32 bits */
typedef struct {
unsigned long sig[_NSIG_WORDS];
} sigset_t;
#define __ARCH_HAS_SA_RESTORER
#include <asm/sigcontext.h>
#undef __HAVE_ARCH_SIG_BITOPS
#endif /* _H8300_SIGNAL_H */
arch/h8300/include/asm/smp.h deleted 100644 → 0
View file @ 272b98c6
/* nothing required here yet */
arch/h8300/include/asm/spinlock.h deleted 100644 → 0
View file @ 272b98c6
#ifndef __H8300_SPINLOCK_H
#define __H8300_SPINLOCK_H
#error "H8/300 doesn't do SMP yet"
#endif
arch/h8300/include/asm/string.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_STRING_H_
#define _H8300_STRING_H_
#ifdef __KERNEL__ /* only set these up for kernel code */
#include <asm/setup.h>
#include <asm/page.h>
#define __HAVE_ARCH_MEMSET
extern void * memset(void * s, int c, size_t count);
#define __HAVE_ARCH_MEMCPY
extern void * memcpy(void *d, const void *s, size_t count);
#else /* KERNEL */
/*
* let user libraries deal with these,
* IMHO the kernel has no place defining these functions for user apps
*/
#define __HAVE_ARCH_STRCPY 1
#define __HAVE_ARCH_STRNCPY 1
#define __HAVE_ARCH_STRCAT 1
#define __HAVE_ARCH_STRNCAT 1
#define __HAVE_ARCH_STRCMP 1
#define __HAVE_ARCH_STRNCMP 1
#define __HAVE_ARCH_STRNICMP 1
#define __HAVE_ARCH_STRCHR 1
#define __HAVE_ARCH_STRRCHR 1
#define __HAVE_ARCH_STRSTR 1
#define __HAVE_ARCH_STRLEN 1
#define __HAVE_ARCH_STRNLEN 1
#define __HAVE_ARCH_MEMSET 1
#define __HAVE_ARCH_MEMCPY 1
#define __HAVE_ARCH_MEMMOVE 1
#define __HAVE_ARCH_MEMSCAN 1
#define __HAVE_ARCH_MEMCMP 1
#define __HAVE_ARCH_MEMCHR 1
#define __HAVE_ARCH_STRTOK 1
#endif /* KERNEL */
#endif /* _M68K_STRING_H_ */
arch/h8300/include/asm/switch_to.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_SWITCH_TO_H
#define _H8300_SWITCH_TO_H
/*
* switch_to(n) should switch tasks to task ptr, first checking that
* ptr isn't the current task, in which case it does nothing. This
* also clears the TS-flag if the task we switched to has used the
* math co-processor latest.
*/
/*
* switch_to() saves the extra registers, that are not saved
* automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
* a0-a1. Some of these are used by schedule() and its predecessors
* and so we might get see unexpected behaviors when a task returns
* with unexpected register values.
*
* syscall stores these registers itself and none of them are used
* by syscall after the function in the syscall has been called.
*
* Beware that resume now expects *next to be in d1 and the offset of
* tss to be in a1. This saves a few instructions as we no longer have
* to push them onto the stack and read them back right after.
*
* 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
*
* Changed 96/09/19 by Andreas Schwab
* pass prev in a0, next in a1, offset of tss in d1, and whether
* the mm structures are shared in d2 (to avoid atc flushing).
*
* H8/300 Porting 2002/09/04 Yoshinori Sato
*/
asmlinkage void resume(void);
#define switch_to(prev,next,last) { \
void *_last; \
__asm__ __volatile__( \
"mov.l %1, er0\n\t" \
"mov.l %2, er1\n\t" \
"mov.l %3, er2\n\t" \
"jsr @_resume\n\t" \
"mov.l er2,%0\n\t" \
: "=r" (_last) \
: "r" (&(prev->thread)), \
"r" (&(next->thread)), \
"g" (prev) \
: "cc", "er0", "er1", "er2", "er3"); \
(last) = _last; \
}
#endif /* _H8300_SWITCH_TO_H */
arch/h8300/include/asm/target_time.h deleted 100644 → 0
View file @ 272b98c6
extern int platform_timer_setup(void (*timer_int)(int, void *, struct pt_regs *));
extern void platform_timer_eoi(void);
extern void platform_gettod(unsigned int *year, unsigned int *mon, unsigned int *day,
unsigned int *hour, unsigned int *min, unsigned int *sec);
arch/h8300/include/asm/termios.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_TERMIOS_H
#define _H8300_TERMIOS_H
#include <uapi/asm/termios.h>
/* intr=^C quit=^| erase=del kill=^U
eof=^D vtime=\0 vmin=\1 sxtc=\0
start=^Q stop=^S susp=^Z eol=\0
reprint=^R discard=^U werase=^W lnext=^V
eol2=\0
*/
#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
/*
* Translate a "termio" structure into a "termios". Ugh.
*/
#define user_termio_to_kernel_termios(termios, termio) \
({ \
unsigned short tmp; \
get_user(tmp, &(termio)->c_iflag); \
(termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
get_user(tmp, &(termio)->c_oflag); \
(termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
get_user(tmp, &(termio)->c_cflag); \
(termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
get_user(tmp, &(termio)->c_lflag); \
(termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
get_user((termios)->c_line, &(termio)->c_line); \
copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
})
/*
* Translate a "termios" structure into a "termio". Ugh.
*/
#define kernel_termios_to_user_termio(termio, termios) \
({ \
put_user((termios)->c_iflag, &(termio)->c_iflag); \
put_user((termios)->c_oflag, &(termio)->c_oflag); \
put_user((termios)->c_cflag, &(termio)->c_cflag); \
put_user((termios)->c_lflag, &(termio)->c_lflag); \
put_user((termios)->c_line, &(termio)->c_line); \
copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
})
#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
#endif /* _H8300_TERMIOS_H */
arch/h8300/include/asm/thread_info.h deleted 100644 → 0
View file @ 272b98c6
/* thread_info.h: h8300 low-level thread information
* adapted from the i386 and PPC versions by Yoshinori Sato <ysato@users.sourceforge.jp>
*
* Copyright (C) 2002 David Howells (dhowells@redhat.com)
* - Incorporating suggestions made by Linus Torvalds and Dave Miller
*/
#ifndef _ASM_THREAD_INFO_H
#define _ASM_THREAD_INFO_H
#include <asm/page.h>
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
/*
* low level task data.
* If you change this, change the TI_* offsets below to match.
*/
struct thread_info {
struct task_struct *task; /* main task structure */
struct exec_domain *exec_domain; /* execution domain */
unsigned long flags; /* low level flags */
int cpu; /* cpu we're on */
int preempt_count; /* 0 => preemptable, <0 => BUG */
struct restart_block restart_block;
};
/*
* macros/functions for gaining access to the thread information structure
*/
#define INIT_THREAD_INFO(tsk) \
{ \
.task = &tsk, \
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
.preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
}
#define init_thread_info (init_thread_union.thread_info)
#define init_stack (init_thread_union.stack)
/*
* Size of kernel stack for each process. This must be a power of 2...
*/
#define THREAD_SIZE_ORDER 1
#define THREAD_SIZE 8192 /* 2 pages */
/* how to get the thread information struct from C */
static inline struct thread_info *current_thread_info(void)
{
struct thread_info *ti;
__asm__(
"mov.l sp, %0 \n\t"
"and.l %1, %0"
: "=&r"(ti)
: "i" (~(THREAD_SIZE-1))
);
return ti;
}
#endif /* __ASSEMBLY__ */
/*
* Offsets in thread_info structure, used in assembly code
*/
#define TI_TASK 0
#define TI_EXECDOMAIN 4
#define TI_FLAGS 8
#define TI_CPU 12
#define TI_PRE_COUNT 16
#define PREEMPT_ACTIVE 0x4000000
/*
* thread information flag bit numbers
*/
#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
#define TIF_SIGPENDING 1 /* signal pending */
#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
#define TIF_MEMDIE 4 /* is terminating due to OOM killer */
#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
#define TIF_NOTIFY_RESUME 6 /* callback before returning to user */
/* as above, but as bit values */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
#define _TIF_WORK_MASK (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
_TIF_NOTIFY_RESUME)
#endif /* __KERNEL__ */
#endif /* _ASM_THREAD_INFO_H */
arch/h8300/include/asm/timer.h deleted 100644 → 0
View file @ 272b98c6
#ifndef __H8300_TIMER_H
#define __H8300_TIMER_H
void h8300_timer_tick(void);
void h8300_timer_setup(void);
void h8300_gettod(unsigned int *year, unsigned int *mon, unsigned int *day,
unsigned int *hour, unsigned int *min, unsigned int *sec);
#define TIMER_FREQ (CONFIG_CPU_CLOCK*10000) /* Timer input freq. */
#define calc_param(cnt, div, rate, limit) \
do { \
cnt = TIMER_FREQ / HZ; \
for (div = 0; div < ARRAY_SIZE(divide_rate); div++) { \
if (rate[div] == 0) \
continue; \
if ((cnt / rate[div]) > limit) \
break; \
} \
if (div == ARRAY_SIZE(divide_rate)) \
panic("Timer counter overflow"); \
cnt /= divide_rate[div]; \
} while(0)
#endif
arch/h8300/include/asm/timex.h deleted 100644 → 0
View file @ 272b98c6
/*
* linux/include/asm-h8300/timex.h
*
* H8/300 architecture timex specifications
*/
#ifndef _ASM_H8300_TIMEX_H
#define _ASM_H8300_TIMEX_H
#define CLOCK_TICK_RATE (CONFIG_CPU_CLOCK*1000/8192) /* Timer input freq. */
typedef unsigned long cycles_t;
extern short h8300_timer_count;
static inline cycles_t get_cycles(void)
{
return 0;
}
#endif
arch/h8300/include/asm/tlb.h deleted 100644 → 0
View file @ 272b98c6
#ifndef __H8300_TLB_H__
#define __H8300_TLB_H__
#define tlb_flush(tlb) do { } while(0)
#include <asm-generic/tlb.h>
#endif
arch/h8300/include/asm/tlbflush.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_TLBFLUSH_H
#define _H8300_TLBFLUSH_H
/*
* Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
* Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
*/
#include <asm/setup.h>
/*
* flush all user-space atc entries.
*/
static inline void __flush_tlb(void)
{
BUG();
}
static inline void __flush_tlb_one(unsigned long addr)
{
BUG();
}
#define flush_tlb() __flush_tlb()
/*
* flush all atc entries (both kernel and user-space entries).
*/
static inline void flush_tlb_all(void)
{
BUG();
}
static inline void flush_tlb_mm(struct mm_struct *mm)
{
BUG();
}
static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
{
BUG();
}
static inline void flush_tlb_range(struct mm_struct *mm,
unsigned long start, unsigned long end)
{
BUG();
}
static inline void flush_tlb_kernel_page(unsigned long addr)
{
BUG();
}
#endif /* _H8300_TLBFLUSH_H */
arch/h8300/include/asm/topology.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _ASM_H8300_TOPOLOGY_H
#define _ASM_H8300_TOPOLOGY_H
#include <asm-generic/topology.h>
#endif /* _ASM_H8300_TOPOLOGY_H */
arch/h8300/include/asm/traps.h deleted 100644 → 0
View file @ 272b98c6
/*
* linux/include/asm-h8300/traps.h
*
* Copyright (C) 2003 Yoshinori Sato <ysato@users.sourceforge.jp>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
#ifndef _H8300_TRAPS_H
#define _H8300_TRAPS_H
extern void system_call(void);
extern void interrupt_entry(void);
extern void trace_break(void);
#define JMP_OP 0x5a000000
#define JSR_OP 0x5e000000
#define VECTOR(address) ((JMP_OP)|((unsigned long)address))
#define REDIRECT(address) ((JSR_OP)|((unsigned long)address))
#define TRACE_VEC 5
#define TRAP0_VEC 8
#define TRAP1_VEC 9
#define TRAP2_VEC 10
#define TRAP3_VEC 11
#if defined(__H8300H__)
#define NR_TRAPS 12
#endif
#if defined(__H8300S__)
#define NR_TRAPS 16
#endif
#endif /* _H8300_TRAPS_H */
arch/h8300/include/asm/types.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_TYPES_H
#define _H8300_TYPES_H
#include <uapi/asm/types.h>
#define BITS_PER_LONG 32
#endif /* _H8300_TYPES_H */
arch/h8300/include/asm/uaccess.h deleted 100644 → 0
View file @ 272b98c6
#ifndef __H8300_UACCESS_H
#define __H8300_UACCESS_H
/*
* User space memory access functions
*/
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <asm/segment.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
/* We let the MMU do all checking */
#define access_ok(type, addr, size) __access_ok((unsigned long)addr,size)
static inline int __access_ok(unsigned long addr, unsigned long size)
{
#define RANGE_CHECK_OK(addr, size, lower, upper) \
(((addr) >= (lower)) && (((addr) + (size)) < (upper)))
extern unsigned long _ramend;
return(RANGE_CHECK_OK(addr, size, 0L, (unsigned long)&_ramend));
}
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
* the address at which the program should continue. No registers are
* modified, so it is entirely up to the continuation code to figure out
* what to do.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
struct exception_table_entry
{
unsigned long insn, fixup;
};
/* Returns 0 if exception not found and fixup otherwise. */
extern unsigned long search_exception_table(unsigned long);
/*
* These are the main single-value transfer routines. They automatically
* use the right size if we just have the right pointer type.
*/
#define put_user(x, ptr) \
({ \
int __pu_err = 0; \
typeof(*(ptr)) __pu_val = (x); \
switch (sizeof (*(ptr))) { \
case 1: \
case 2: \
case 4: \
*(ptr) = (__pu_val); \
break; \
case 8: \
memcpy(ptr, &__pu_val, sizeof (*(ptr))); \
break; \
default: \
__pu_err = __put_user_bad(); \
break; \
} \
__pu_err; \
})
#define __put_user(x, ptr) put_user(x, ptr)
extern int __put_user_bad(void);
/*
* Tell gcc we read from memory instead of writing: this is because
* we do not write to any memory gcc knows about, so there are no
* aliasing issues.
*/
#define __ptr(x) ((unsigned long *)(x))
/*
* Tell gcc we read from memory instead of writing: this is because
* we do not write to any memory gcc knows about, so there are no
* aliasing issues.
*/
#define get_user(x, ptr) \
({ \
int __gu_err = 0; \
typeof(*(ptr)) __gu_val = *ptr; \
switch (sizeof(*(ptr))) { \
case 1: \
case 2: \
case 4: \
case 8: \
break; \
default: \
__gu_err = __get_user_bad(); \
break; \
} \
(x) = __gu_val; \
__gu_err; \
})
#define __get_user(x, ptr) get_user(x, ptr)
extern int __get_user_bad(void);
#define copy_from_user(to, from, n) (memcpy(to, from, n), 0)
#define copy_to_user(to, from, n) (memcpy(to, from, n), 0)
#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
#define __copy_to_user_inatomic __copy_to_user
#define __copy_from_user_inatomic __copy_from_user
#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; })
#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; })
/*
* Copy a null terminated string from userspace.
*/
static inline long
strncpy_from_user(char *dst, const char *src, long count)
{
char *tmp;
strncpy(dst, src, count);
for (tmp = dst; *tmp && count > 0; tmp++, count--)
;
return(tmp - dst); /* DAVIDM should we count a NUL ? check getname */
}
/*
* Return the size of a string (including the ending 0)
*
* Return 0 on exception, a value greater than N if too long
*/
static inline long strnlen_user(const char *src, long n)
{
return(strlen(src) + 1); /* DAVIDM make safer */
}
#define strlen_user(str) strnlen_user(str, 32767)
/*
* Zero Userspace
*/
static inline unsigned long
clear_user(void *to, unsigned long n)
{
memset(to, 0, n);
return 0;
}
#define __clear_user clear_user
#endif /* _H8300_UACCESS_H */
arch/h8300/include/asm/ucontext.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_UCONTEXT_H
#define _H8300_UCONTEXT_H
struct ucontext {
unsigned long uc_flags;
struct ucontext *uc_link;
stack_t uc_stack;
struct sigcontext uc_mcontext;
sigset_t uc_sigmask; /* mask last for extensibility */
};
#endif
arch/h8300/include/asm/unaligned.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _ASM_H8300_UNALIGNED_H
#define _ASM_H8300_UNALIGNED_H
#include <linux/unaligned/be_memmove.h>
#include <linux/unaligned/le_byteshift.h>
#include <linux/unaligned/generic.h>
#define get_unaligned __get_unaligned_be
#define put_unaligned __put_unaligned_be
#endif /* _ASM_H8300_UNALIGNED_H */
arch/h8300/include/asm/unistd.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _ASM_H8300_UNISTD_H_
#define _ASM_H8300_UNISTD_H_
#include <uapi/asm/unistd.h>
#define NR_syscalls 321
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_OLD_STAT
#define __ARCH_WANT_STAT64
#define __ARCH_WANT_SYS_ALARM
#define __ARCH_WANT_SYS_GETHOSTNAME
#define __ARCH_WANT_SYS_IPC
#define __ARCH_WANT_SYS_PAUSE
#define __ARCH_WANT_SYS_SGETMASK
#define __ARCH_WANT_SYS_SIGNAL
#define __ARCH_WANT_SYS_TIME
#define __ARCH_WANT_SYS_UTIME
#define __ARCH_WANT_SYS_WAITPID
#define __ARCH_WANT_SYS_SOCKETCALL
#define __ARCH_WANT_SYS_FADVISE64
#define __ARCH_WANT_SYS_GETPGRP
#define __ARCH_WANT_SYS_LLSEEK
#define __ARCH_WANT_SYS_NICE
#define __ARCH_WANT_SYS_OLD_GETRLIMIT
#define __ARCH_WANT_SYS_OLD_MMAP
#define __ARCH_WANT_SYS_OLD_SELECT
#define __ARCH_WANT_SYS_OLDUMOUNT
#define __ARCH_WANT_SYS_SIGPENDING
#define __ARCH_WANT_SYS_SIGPROCMASK
#define __ARCH_WANT_SYS_FORK
#define __ARCH_WANT_SYS_VFORK
#define __ARCH_WANT_SYS_CLONE
#endif /* _ASM_H8300_UNISTD_H_ */
arch/h8300/include/asm/user.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_USER_H
#define _H8300_USER_H
#include <asm/page.h>
/* Core file format: The core file is written in such a way that gdb
can understand it and provide useful information to the user (under
linux we use the 'trad-core' bfd). There are quite a number of
obstacles to being able to view the contents of the floating point
registers, and until these are solved you will not be able to view the
contents of them. Actually, you can read in the core file and look at
the contents of the user struct to find out what the floating point
registers contain.
The actual file contents are as follows:
UPAGE: 1 page consisting of a user struct that tells gdb what is present
in the file. Directly after this is a copy of the task_struct, which
is currently not used by gdb, but it may come in useful at some point.
All of the registers are stored as part of the upage. The upage should
always be only one page.
DATA: The data area is stored. We use current->end_text to
current->brk to pick up all of the user variables, plus any memory
that may have been malloced. No attempt is made to determine if a page
is demand-zero or if a page is totally unused, we just cover the entire
range. All of the addresses are rounded in such a way that an integral
number of pages is written.
STACK: We need the stack information in order to get a meaningful
backtrace. We need to write the data from (esp) to
current->start_stack, so we round each of these off in order to be able
to write an integer number of pages.
The minimum core file size is 3 pages, or 12288 bytes.
*/
/* This is the old layout of "struct pt_regs" as of Linux 1.x, and
is still the layout used by user (the new pt_regs doesn't have
all registers). */
struct user_regs_struct {
long er1,er2,er3,er4,er5,er6;
long er0;
long usp;
long orig_er0;
short ccr;
long pc;
};
/* When the kernel dumps core, it starts by dumping the user struct -
this will be used by gdb to figure out where the data and stack segments
are within the file, and what virtual addresses to use. */
struct user{
/* We start with the registers, to mimic the way that "memory" is returned
from the ptrace(3,...) function. */
struct user_regs_struct regs; /* Where the registers are actually stored */
/* ptrace does not yet supply these. Someday.... */
/* The rest of this junk is to help gdb figure out what goes where */
unsigned long int u_tsize; /* Text segment size (pages). */
unsigned long int u_dsize; /* Data segment size (pages). */
unsigned long int u_ssize; /* Stack segment size (pages). */
unsigned long start_code; /* Starting virtual address of text. */
unsigned long start_stack; /* Starting virtual address of stack area.
This is actually the bottom of the stack,
the top of the stack is always found in the
esp register. */
long int signal; /* Signal that caused the core dump. */
int reserved; /* No longer used */
unsigned long u_ar0; /* Used by gdb to help find the values for */
/* the registers. */
unsigned long magic; /* To uniquely identify a core file */
char u_comm[32]; /* User command that was responsible */
};
#define NBPG PAGE_SIZE
#define UPAGES 1
#define HOST_TEXT_START_ADDR (u.start_code)
#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
#endif
arch/h8300/include/asm/virtconvert.h deleted 100644 → 0
View file @ 272b98c6
#ifndef __H8300_VIRT_CONVERT__
#define __H8300_VIRT_CONVERT__
/*
* Macros used for converting between virtual and physical mappings.
*/
#ifdef __KERNEL__
#include <asm/setup.h>
#include <asm/page.h>
#define phys_to_virt(vaddr) ((void *) (vaddr))
#define virt_to_phys(vaddr) ((unsigned long) (vaddr))
#define virt_to_bus virt_to_phys
#define bus_to_virt phys_to_virt
#endif
#endif
arch/h8300/include/uapi/asm/Kbuild deleted 100644 → 0
View file @ 272b98c6
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
header-y += auxvec.h
header-y += bitsperlong.h
header-y += byteorder.h
header-y += errno.h
header-y += fcntl.h
header-y += ioctl.h
header-y += ioctls.h
header-y += ipcbuf.h
header-y += kvm_para.h
header-y += mman.h
header-y += msgbuf.h
header-y += param.h
header-y += poll.h
header-y += posix_types.h
header-y += ptrace.h
header-y += resource.h
header-y += sembuf.h
header-y += setup.h
header-y += shmbuf.h
header-y += sigcontext.h
header-y += siginfo.h
header-y += signal.h
header-y += socket.h
header-y += sockios.h
header-y += stat.h
header-y += statfs.h
header-y += swab.h
header-y += termbits.h
header-y += termios.h
header-y += types.h
header-y += unistd.h
arch/h8300/include/uapi/asm/auxvec.h deleted 100644 → 0
View file @ 272b98c6
#ifndef __ASMH8300_AUXVEC_H
#define __ASMH8300_AUXVEC_H
#endif
arch/h8300/include/uapi/asm/bitsperlong.h deleted 100644 → 0
View file @ 272b98c6
#include <asm-generic/bitsperlong.h>
arch/h8300/include/uapi/asm/byteorder.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_BYTEORDER_H
#define _H8300_BYTEORDER_H
#include <linux/byteorder/big_endian.h>
#endif /* _H8300_BYTEORDER_H */
arch/h8300/include/uapi/asm/errno.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_ERRNO_H
#define _H8300_ERRNO_H
#include <asm-generic/errno.h>
#endif /* _H8300_ERRNO_H */
arch/h8300/include/uapi/asm/fcntl.h deleted 100644 → 0
View file @ 272b98c6
#ifndef _H8300_FCNTL_H
#define _H8300_FCNTL_H
#define O_DIRECTORY 040000 /* must be a directory */
#define O_NOFOLLOW 0100000 /* don't follow links */
#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */
#define O_LARGEFILE 0400000
#include <asm-generic/fcntl.h>
#endif /* _H8300_FCNTL_H */
arch/h8300/include/uapi/asm/ioctl.h deleted 100644 → 0
View file @ 272b98c6
#include <asm-generic/ioctl.h>
arch/h8300/include/uapi/asm/ioctls.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/ipcbuf.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/kvm_para.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/mman.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/msgbuf.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/param.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/poll.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/posix_types.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/ptrace.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/resource.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/sembuf.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/setup.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/shmbuf.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/sigcontext.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/siginfo.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/signal.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/socket.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/sockios.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/stat.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/statfs.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/swab.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/termbits.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/termios.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/types.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/include/uapi/asm/unistd.h deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/kernel/Makefile deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/kernel/asm-offsets.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/kernel/entry.S deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/kernel/gpio.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/kernel/h8300_ksyms.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/kernel/irq.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/kernel/module.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/kernel/process.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/kernel/ptrace.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/kernel/setup.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/kernel/signal.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/kernel/sys_h8300.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/kernel/syscalls.S deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/kernel/time.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/kernel/timer/Makefile deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/kernel/timer/itu.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/kernel/timer/timer16.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/kernel/timer/timer8.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/kernel/timer/tpu.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/kernel/traps.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/kernel/vmlinux.lds.S deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/lib/Makefile deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/lib/abs.S deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/lib/ashrdi3.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/lib/checksum.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/lib/memcpy.S deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/lib/memset.S deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/lib/romfs.S deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/mm/Makefile deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/mm/fault.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/mm/init.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/mm/kmap.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/mm/memory.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/platform/h8300h/Makefile deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/platform/h8300h/aki3068net/Makefile deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/platform/h8300h/aki3068net/crt0_ram.S deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/platform/h8300h/generic/Makefile deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/platform/h8300h/generic/crt0_ram.S deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/platform/h8300h/generic/crt0_rom.S deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/platform/h8300h/h8max/Makefile deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/platform/h8300h/h8max/crt0_ram.S deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/platform/h8300h/irq.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/platform/h8300h/ptrace_h8300h.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/platform/h8s/Makefile deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/platform/h8s/edosk2674/Makefile deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/platform/h8s/edosk2674/crt0_ram.S deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/platform/h8s/edosk2674/crt0_rom.S deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/platform/h8s/generic/Makefile deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/platform/h8s/generic/crt0_ram.S deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/platform/h8s/generic/crt0_rom.S deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/platform/h8s/irq.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
arch/h8300/platform/h8s/ptrace_h8s.c deleted 100644 → 0
View file @ 272b98c6
This diff is collapsed.
include/linux/serial_sci.h
View file @ 4b084784
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7