Merge tag 'pxa-for-4.11' of https://github.com/rjarzmik/linux into next/soc

This is the pxa changes for v4.11 cycle.

This cycle is a minor fixes one, covering :
 - build fixes from Arnd, mainly include related
 - transfer of maintainance of Motorala phone to Robert

* tag 'pxa-for-4.11' of https://github.com/rjarzmik/linux:
  MAINTAINERS: transfer maintainership for the EZX platform
  ARM: pxa: include linux/leds.h
  ARM: pxa: ezx: fix a910 camera data
Signed-off-by: Olof Johansson <olof@lixom.net>

MAINTAINERS

@@ -1227,13 +1227,9 @@ S:	Maintained
 N:	efm32
 
 ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
-M:	Daniel Ribeiro <drwyrm@gmail.com>
-M:	Stefan Schmidt <stefan@openezx.org>
-M:	Harald Welte <laforge@openezx.org>
-L:	openezx-devel@lists.openezx.org (moderated for non-subscribers)
-W:	http://www.openezx.org/
+M:	Robert Jarzmik <robert.jarzmik@free.fr>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	topgit git://git.openezx.org/openezx.git
 F:	arch/arm/mach-pxa/ezx.c
 
 ARM/FARADAY FA526 PORT

arch/arm/mach-pxa/ezx.c

@@ -696,32 +696,7 @@ static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
 };
 #endif /* CONFIG_MACH_EZX_E2 */
 
-#ifdef CONFIG_MACH_EZX_A780
-/* gpio_keys */
-static struct gpio_keys_button a780_buttons[] = {
-	[0] = {
-		.code       = SW_LID,
-		.gpio       = GPIO12_A780_FLIP_LID,
-		.active_low = 0,
-		.desc       = "A780 flip lid",
-		.type       = EV_SW,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
-	.buttons  = a780_buttons,
-	.nbuttons = ARRAY_SIZE(a780_buttons),
-};
-
-static struct platform_device a780_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &a780_gpio_keys_platform_data,
-	},
-};
-
+#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_A910)
 /* camera */
 static struct regulator_consumer_supply camera_dummy_supplies[] = {
 	REGULATOR_SUPPLY("vdd", "0-005d"),
@@ -750,6 +725,35 @@ static struct platform_device camera_supply_dummy_device = {
 		.platform_data = &camera_dummy_config,
 	},
 };
+#endif
+
+#ifdef CONFIG_MACH_EZX_A780
+/* gpio_keys */
+static struct gpio_keys_button a780_buttons[] = {
+	[0] = {
+		.code       = SW_LID,
+		.gpio       = GPIO12_A780_FLIP_LID,
+		.active_low = 0,
+		.desc       = "A780 flip lid",
+		.type       = EV_SW,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
+	.buttons  = a780_buttons,
+	.nbuttons = ARRAY_SIZE(a780_buttons),
+};
+
+static struct platform_device a780_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &a780_gpio_keys_platform_data,
+	},
+};
+
+/* camera */
 static int a780_camera_reset(struct device *dev)
 {
 	gpio_set_value(GPIO19_GEN1_CAM_RST, 0);

arch/arm/mach-pxa/idp.c

@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/fb.h>